HUSKY LINERS 9948 Weather Beater Floor Liners Instruction Manual
- June 13, 2024
- HUSKY LINERS
Table of Contents
HUSKY LINERS 9948 Weather Beater Floor Liners
Product Information
The WeatherBeaterTM Floor Liners from Husky Liners Inc. (PT #9948) are custom molded floor liners designed to fit your specific vehicle’s floor board. These liners are made to replace your factory floor mats and provide superior protection for your vehicle’s interior. The liners are designed to be durable and resistant to wear and tear.
Product Usage Instructions
To ensure correct fitment, it is important to remove the factory floor mats before installing the WeatherBeaterTM Floor Liners. However, you should not remove the factory-installed carpeting.
Installation Instructions for Front Floor Liners:
- Move both front row seats to their most rearward position.
- Install the front floor liners as shown in the provided diagram.
- The driver and passenger side liners will attach to the factory floor twist locks.
- Once the liners are installed, reposition the seats as desired.
Installation Instructions for Second Seat Floor Liner:
- Move both front row seats to their most forward position.
- Install the second seat floor liner as shown in the provided diagram.
- Once the liner is installed, reposition the seats as desired.
For more information and to view the Husky Liner Lifetime Warranty, please visit www.huskyliners.com/lifetime-warranty.
CARE AND USE INSTRUCTIONS
Thank you for selecting an WeatherBeater™ Floor Liners from Husky Liners Inc.
Your new liners are custom molded to fit your specific vehicle’s floor board.
The liners are made to take the place of your factory floor mats. For correct
fit, it is necessary to remove the factory floor mats before installing your
new floor liners. However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and
extremely tough and durable. The easiest way to clean your liner is with a
damp cloth or sponge and soap and water. Windex®, 409® and ArmorAll® type
cleaners work as well.
INSTALLATION INSTRUCTIONS
FOR YOUR FRONT FLOOR LINERS
TO EASE INSTALLATION OF YOUR NEW FRONT LINERS, MOVE BOTH FRONT ROW SEATS TO THEIR MOST REARWARD POSITION. WITH THIS DONE, INSTALL THE LINERS AS SHOWN ABOVE. THE DRIVER AND PASSENGER SIDE LINER WILL ATTACH TO THE FACTORY FLOOR TWIST LOCKS. ONCE YOU HAVE INSTALLED YOUR LINERS, REPOSITION THE SEATS AS DESIRED.
WEATHERBEATER® FLOOR LINERS
Thank you for selecting an WeatherBeater™ Floor Liners from Husky Liners Inc.
Your new liners are custom molded to fit your specific vehicle’s floor board.
The liners are made to take the place of your factory floor mats. For correct
fit, it is necessary to remove the factory floor mats before installing your
new floor liners. However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and
extremely tough and durable. The easiest way to clean your liner is with a
damp cloth or sponge and soap and water. Windex®, 409® and ArmorAll® type
cleaners work as well.
INSTALLATION INSTRUCTIONS FOR YOUR
SECOND SEAT FLOOR LINERS
TO EASE INSTALLATION OF YOUR NEW SECOND SEAT LINER, MOVE BOTH FRONT ROW SEATS TO THEIR MOST FORWARD POSITION. WITH THIS DONE, INSTALL THE LINER AS SHOWN ABOVE. ONCE YOU HAVE INSTALLED YOUR LINER, REPOSITION THE SEATS AS DESIRED.
View the Husky Liner Lifetime Warranty at www.huskyliners.com/lifetime- warranty
9948_Installation_Instruction.docx 6_8_2022
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>