Darkglass Electronics Spot Series Noise Gate Pedal User Manual

: September 12, 2024
: Darkglass Electronics

Table of Contents

Spot Series Noise Gate Pedal
Darkglass Noise Gate
Specifications
Product Usage Instructions
Controls
Power Requirements
Activation of Warranty
- Frequently Asked Questions (FAQ)
1. What should I do if my Noise Gate is not functioning
2. Can I adjust the gate’s threshold settings on the fly?
3. Are there any specific safety precautions I should follow

Spot Series Noise Gate Pedal

“`html

Darkglass Noise Gate

Specifications

Input Impedance: 1M
Output Impedance: 100k
Current Consumption: ~60mA
Voltage: 9V DC (Center Negative)

Product Usage Instructions

Controls

The Noise Gate features a front Threshold control knob to adjust
the gate’s threshold:

Soft Mode (Blue LED color): Adjust threshold from -65 dBV to
-30 dBV
Hard Mode (Red LED color): Adjust threshold from -45 dBV to
+5dBV

Power Requirements

Warning: The Noise Gate requires a regulated 9V
DC adapter with a center-negative plug. Using unregulated power
supplies or higher voltages may lead to suboptimal performance and
void the warranty.

Activation of Warranty

To activate the warranty, register your product at mypedal.darkglass.com and enter
the serial number located on the back of the pedal. Before shipping
a product for service, contact support@darkglass.com.

Frequently Asked Questions (FAQ)

1. What should I do if my Noise Gate is not functioning

correctly?

If you encounter issues with your Noise Gate, check the power
supply first. Ensure you are using a regulated 9V DC adapter with a
center-negative plug. If problems persist, contact our support team
for assistance.

2. Can I adjust the gate’s threshold settings on the fly?

Yes, you can adjust the threshold settings by turning the
Threshold knob. The Soft mode provides softer gain reduction, while
the Hard mode offers more aggressive gating.

3. Are there any specific safety precautions I should follow

while using the Noise Gate?

Avoid using unregulated power supplies or higher voltages with
the Noise Gate as it may lead to performance issues. Always consult
the user manual for proper handling and maintenance
instructions.

“`

CREATIONS DEALERS SUITE APPAREL

Specs Warning Warranty Disclaimer EMC / EMI

Noise Gate Manual
Spot Series
Specs
Controls / Front Threshold
Use this push knob to control the threshold of the noise gate. Press the knob to switch between the “Soft” mode (Blue LED color) for softer gain reduction and “Hard” (Red LED color) for the more aggressive gate operation.
Threshold range
From -65 dBV to -30 dBV in “Soft” mode From -45 dBV to +5dBV in “Hard” mode
Technical Specifications Input Impedance: 1M Output Impedance: 100k Current Consumption: ~60mA Voltage: 9V DC (Center Negative)

Dimensions
Width: 50 mm / 2 Length: 36,5 mm/ 1 ½ Height: 45 mm / 1,75 Weight: 205 g / 0,45 lb
Warning
The Noise Gate has a current draw of 60mA. Only use a regulated 9V DC adapter with a center-negative plug. Unregulated power supplies and/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty.
Warranty
To activate the warranty, we encourage you to register your product on: http://mypedal.darkglass.com and enter the serial number on the back of your pedal. Please contact us via email support@darkglass.com before shipping a product to us.
Disclaimer
In the interest of continuous improvement, speci cations are subject to change without notice. If you have any questions, please don’t hesitate to contact us at www.darkglass.com The manufacturer claims that the above product ful ls the requirements as set by EN55013, EN55020, EN60555-2, EN60555-3, RoHS, WEEE.
EMC / EMI

This equipment has been tested and found to comply with the limits for a Class B Digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit di erent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
PRIVACY POLICY CAREERS

DARKGLASS is a registered trademark in the U.S., number 4,616,801, owned by Darkglass Electronics Oy.

Designed by Revolve Studio