Starline Usa EL197-10W Wireless Charger Holder User Manual
- June 5, 2024
- Starline Usa
Table of Contents
Starline Usa EL197-10W Wireless Charger Holder
Security Information
To prevent personal injury or injury to other people or damage to your device, read the product’s safety information.
- Do not use the machine for a while if the machine overheats.
- Do not store the device near or on heaters, microwaves,cooking appliances or high-pressure containers, as the device may overheat and cause a fire. Do not drop or hit the loader or device. If your device falls, it may be damaged.
- If children use the appliance, make sure that they use it correctly.
- The device should be dry.
- Moisture and liquid can damage the parts or the electronic systems of the device.
- If your device is wet dry it with a towel and take itto a service center.
- Do not disassemble, modify or repair the device.
- Your device may not work properly, which increases the risk of electric shock.
- Any changes or modifications to the device may void the warranty producer’s.
- Do not place too close to a magnetic strip or chip card to avoid magnetic damage .
- Keep a minimum distance of 20 cm between implanted devices medical devices and the wireless charger to avoid potential interference with the medical device.
- Working ambient temperature: 0-50 ac.
- If the device requires repair, take itto the Service Center.
- To completely switch off the appliance, pull out the plug.
Connection to power supply
- Connect the adapter to the socket.
- Connect the adapter to the USB 2.0 interface and the other micro/ Type-C USB connector to the wireless charger.
Standby: LED light is off
Switching on: the LED lights up for 2 seconds, then the charging goes off: LED lights up FOD (foreign object detector): LED light blinks once every second until foreign objects disappear
Product packaging contains: wireless loader, charging cable, operating instructions.
Note: The AC adapter is not included, please buy separately or Use an original mobile phone adapter if necessary.
Technical data
- Input: DC 5\/, 2A DC 9\/, 1.67A Output: 9V 1.2A(max)
- Loading efficiency: over 75% Loading distance: <Bmm Frequency: 17 0-205KHz
- Wireless charging power: l 0W Standard: Qi Compatible
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept
any interference received, including interference that may cause undesired
operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guide lines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>