bright starts 11896-MEES MICKEY MOUSE Happy Triangles Cradling Bouncer User Manual
- June 2, 2024
- bright starts
Table of Contents
bright starts 11896-MEES MICKEY MOUSE Happy Triangles Cradling Bouncer
Product Information
Specifications:
- Brand: Bright Starts
- Model: 11896-MEES
- Product Name: MICKEY MOUSE Happy TrianglesTM Cradling Bouncer
- Power Source: 1 x C/LR14 (1.5V) alkaline battery (not included)
Description:
- Base frame tube
- Left base frame member
- Right base frame member
- Left backrest tube
- Right backrest tube
- Footrest wire
- Vibration unit
- Seat pad
- Toy bar with toys
Product Usage Instructions
Assembling the Bouncer:
- Identify all components listed in the description.
- Connect the base frame tubes, backrest tubes, footrest wire, and seat pad according to the provided diagram.
- Attach the toy bar with toys to the designated slots on the bouncer.
Using the Vibration Function:
The vibration function helps calm and soothe the baby. To use:
- Locate the Vibration ON/OFF switch.
- Slide the switch to the ON position to activate vibration and to the OFF position to turn it off.
Disassembling for Storage:
- Using a small Phillips screwdriver, depress the release button on each connecting hub.
- Remove the footrest tube and base frame tubes from the connecting hubs.
FAQ:
-
Q: What type of batteries does the vibration unit require?
A: The vibration unit requires (1) size C/LR14 (1.5V) alkaline batteries, which are not included in the package. -
Q: How can I clean the seat pad?
A: The seat pad can be spot cleaned with a damp cloth and mild soap. Ensure it is completely dry before reassembly.
SAFETY WARNINGS
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
WARNING
FALL HAZARD: Babies have suffered skull fractures falling while in and from bouncers when not used properly.
- NEVER leave the child unattended.
- Use bouncer ONLY on the floor.
- NEVER use on an elevated surface. Only use on the floor.
- NEVER lift or carry baby in bouncer.
- NEVER lift the bouncer using a toy bar as a handle.
SUFFOCATION HAZARD: Babies have suffocated when bouncers are tipped over on soft surfaces and/or when bouncers have been used as a sleep product.
- NEVER use on a bed, sofa, cushion, or other soft surface.
- Stay near and watch the baby during use. This product is not safe for sleep or unsupervised use. If the baby falls asleep, remove the baby as soon as possible and place baby on a firm, flat sleep surface such as a crib or bassinet.
TO PREVENT FALLS AND SUFFOCATION:
- ALWAYS use restraints and adjust them to fit snugly.
- STOP using bouncer when baby starts trying to sit up or has reached 20 lb (9 kg), whichever comes first.
- Never let the child sleep in this product.
- NEVER use as an infant carrier for automobile or airline travel.
- NEVER attach any additional strings or straps to the product or toy bar.
IMPORTANT
- Adult assembly is required.
- Please read all instructions before assembly and use of the product.
- Care should be taken in unpacking and assembly.
- Examine the product frequently for damaged, missing, or loose parts.
- DO NOT use if any parts are missing, damaged, or broken.
- Contact Kids2 for replacement parts and instructions if needed. Never substitute parts.
- This product does not replace a cot or a crib. Should the child fall asleep, then it should be placed in a suitable cot or crib.
Care and Cleaning
- Seat pad – Remove from frame. Fasten the buckles on the seat restraint and seat pad. Fasten all hook-and-loop patches to the corresponding patch. Machine wash with cold water, gentle cycle. No bleach. Tumble dry, using low heat.
- Toy bar and toys – Wipe clean with a damp cloth and mild soap. Air dry. Do not immerse in water.
- Frame – Wipe the metal frame with a soft, clean cloth and mild soap.
Battery Information
The vibration Unit requires (1) size C/LR14 (1.5V) alkaline batteries (not
included).
CAUTION: Follow the battery guidelines in this section. Otherwise,
battery life may be shortened or the batteries may leak or rupture. To prevent
battery leaks, which can burn skin and eyes:
- Always keep batteries away from children.
- Never mix old and new batteries or batteries of different brands or types.
- Always replace the entire set of batteries at one time.
- Do not mix alkaline, standard, or rechargeable batteries.
- Only batteries of the same or equivalent type as recommended are to be used.
- Install the batteries so that the polarity of each one matches the markings in the battery compartment.
- Do not short-circuit the batteries.
- Do not store batteries in areas that have extreme temperatures (such as attics, garages, or automobiles).
- Remove exhausted batteries from the battery compartment.
- Never attempt to recharge a battery unless it is specifically marked “rechargeable.”
- Rechargeable batteries are to be removed from the toy before being charged.
- Rechargeable batteries are only to be charged under adult supervision.
- Dispose of used batteries immediately.
- Please use the correct disposal method for batteries.
- Remove batteries before putting the product into storage for a prolonged period.
- Weak batteries cause erratic product operation, including distorted sound, dimming or failed lights, and slow or non-working motorized parts. Because each electrical component requires a different operating voltage, replace the batteries when any function fails to operate.
- Do not dispose of products or batteries in a fire, batteries may explode or leak.
This symbol indicates that the product is not to be disposed of in household waste as batteries contain substances that can be damaging to the environment and health. Contact local authority for recycling & collection information.
Parts List and Drawing
| No. | Qty. | Description |
|---|---|---|
| 1 | (1) | Base frame tube |
| 2 | (1) | Left base frame member |
| 3 | (1) | Right base frame member |
| 4 | (1) | Left backrest tube |
| 5 | (1) | Right backrest tube |
| 6 | (1) | Footrest wire |
| 7 | (1) | Vibration unit |
| 8 | (1) | Seat pad |
| 9 | (1) | Toy bar with toys |
not included
INSTALLATION
Using the Seat Restraint
Storage and Travel
To disassemble the bouncer for storage:
Use a small Phillips screwdriver to depress the release button on the inside
of each connecting hub on the bouncer. Remove the footrest tube and base frame
tubes from each connecting hub.
Find us on Facebook and Instagram @brightstarts
MANUFACTURED FOR
©2023 KIDS2, INC. www.kids2.com/helpKIDS2,
INC. ATLANTA, GA
USA 30305
1-800-230-8190
IMPORTED BY AUSTRALIA PTY LIMITED CASTLE HILL, NSW AUSTRALIA 2154
(02) 9894-1855
References
- Bright Starts™ – Kids2, LLC
- Disney.com | The official home for all things Disney
- Kids2 Contact Us – Kids2, LLC
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>