ShiAn SA-WL01 Fast Wireless Charger Instructions

**ShiAn SA-WL01 Fast Wireless Charger

**

Product instructions

Product name: FAST WIRELESS CHARGER / Wireless Charger / Magnetic Wireless Charger.
Thank you for choosing this product, Read the instructions carefully before using!

Model：SA-WL01，SA-WL02

Declaration of different:SA-WL01 is a desktop wireless charger,SA-WL02 is a car wireless charger,SA-WL02isequipped with a car mobile phone fixed bracket, there is no other difference between the models.

Parameter Specification

input: DC 12V/1.5A,9V/1.67A/5V/2A
output: 15W/10W/7.5W/5W
Charging distance: 8MM
Product dimensions: Ø69.515.2mm (SA-WL01) , Ø69.587.5mm (SA-WL02)
Product Material: ABS + Zinc Alloy
(QC2.0 is required for fast charging mode/QC3. 0 or 18W and above adapters)

Indicating status and protection functions

Standby mode: LED lights are always on.
Charging mode: LED light is off, receiver is removed, indicator turns blue and enters standby mode.
Product size: 7130.571mm. FOD Automated Foreign Body Detection: Intelligent recognition of foreign bodies, such as hard objects, key sand other metal or magnetic objects.
All-round protection: temperature, short circuit, over voltage over current.

Requirements

1. For models above IPHONE 12, the magnetic car mount can be used directly in the state of bare metal without a shell. It can realize the function of magnetic fast charging and car bracket navigation [If you need to use it with a case, you need to be equipped with a magnetic mobile phone case with built-in magnetic attracting sheet function]

2. Other brands of mobile phones with wireless charging function need to wear magnetic coils, use this magnetic bracket [All mobile phones with wireless charging function can realize magnetic fast charging +mobile phone bracket and navigation]

3. cket and navigation]

4. Wear a magnetic coil on a mobile phone without a wireless charging function, and use this magnetic car mount
   [All mobile phones without wireless charging function can realize magnetic suction bracket and car navigation]Can’t charge the phone, can be used as a magnetic stand

5. When pasting the magnetic guide sheet, it should be stuck in the center of the mobile phone, please use the positioning sticker scale to measure.
   [Measurement method of the positioning sticker: The size indications of the surrounding scales are the same. At this time, the center circle of the positioning sticker is the mobile phone. Center position]

6. No other objects can be posted on the back of the bare metal/the back of the magnetic holster, season to affect the magnetic suction, Causing unstable suction or inability to charge

7. Please use QC3.0 car charger and 2A4 core charging cable to achieve fast charging

Attention

1. Do not squeeze or collide heavily.
2. Do not disassemble or put into fire by yourself when the power is on, in water, to avoid short circuit leakage.
3. Do not use in severe high temperature, humidity or corrosive environment to avoid damaging the circuit Leakage occurred
4. Do not charge magnetic cards (ID cards, bank cards, etc.) with magnetic strips or chips On the board, avoid magnetic card failure.
5. Do not place metal (metal objects such as coins) on the charging plate while charging, as this will prevent Cause heat damage

FCC Statement

Note: This product is suitable for all QI standard mobile phones with wireless charging function.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation
   NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
   If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>