RACCeWAY Kobra Electro Scooter User Manual

RACCeWAY Kobra Electro Scooter

Product Information

Specifications:

• Brand: KOBRA
• Product Type: E-Scooter
• Recommended Operator Age: 16 years or older
• Charging Requirement: Fully charge the batteries before use
• Maximum Weight Capacity: 150 Kgs

Product Usage Instructions

Charging the E-Scooter:
Before using the E-Scooter, ensure to fully charge the batteries. Connect the charger to a power source and then to the E-Scooter’s charging port. Allow the batteries to charge completely before unplugging.

Reading the Manual:
Take the time to read through the user manual provided with the E-Scooter. This manual contains important safety guidelines, maintenance instructions, and other essential information for operating the E-Scooter safely.

Safety Guidelines:
Follow these general safety guidelines while using the E-Scooter:

1. Avoid weaving through traffic or making sudden moves.
2. Avoid carrying items that obstruct your vision or control of the E-Scooter.
3. Do not hitch a ride by holding onto another vehicle.
4. Do not use the E-Scooter if you have physical or mental impairments.
5. Avoid using headphones or a cellular phone while riding.

Helmet Requirement:
Always wear a helmet while riding the E-Scooter. Use a helmet designed for biking and ensure it is properly worn before operating the E-Scooter.

Restrictions:
Avoid using the E-Scooter in the following conditions:

1. Roads with speed limits exceeding 25 km/h.
2. Sidewalks or pedestrian walkways.
3. Bumpy, rough, or unpaved surfaces.
4. In darkness without lights on.
5. Sandy or gravel surfaces.
6. If you weigh more than 150 Kgs.

FAQ:

• Q: Can I repair the E-Scooter’s spare parts by myself?
  A: It is recommended not to dismantle or repair spare parts by yourself. Contact the local distributor or servicing station for any necessary repairs.

READ THIS MANUAL BEFORE OPERATING YOUR E-SCOOTER STRONGLY SUGGEST THE OPERATOR OF THIS PRODUCT BE 16 YEARS OF AGE OR OLDER
For the most recent version of this user’s manual and for all updated product information, please contact with the local dealer.
YOUR INSURANCE POLICIES MAY NOT PROVIDE COVERAGE FOR ACCIDENTS INVOLVING USE OF THE E-SCOOTER. TO DETERMINE IF COVERAGE IS PROVIDED YOU SHOULD CONTACT YOUR INSURANCE COMPANY OF AGENT

Introduction

Dear Customer,
Wow! You are excited! You have just received our brand new E-Scooter! We are excited too, because as designers and developers of our e-scooters, we want to make you happy, and we believe that your new e-scooters will give you lots of fun.
I know that you want to get this scooters on the road immediately, but please STOP!
Why? Well, first of all, you need to charge your batteries fully before using it. So, while your e-scooters is charging, take the time to read this manual. We have worked hard to make it as readable and fun as possible! This manual will help prevent injury and teach you how to care for your new e-scooters.

• It is the Owner’s responsibility to carefully read all of the contents of this manual and to comply with all laws pertaining to the operation of electric scooters in your local jurisdiction. If you have any questions please consult with the Laws web page or consult your local department of motor vehicles for clarification.
• To drive the vehicle on the roads,check local laws.
• We have worked hard to provide you a quality product, well designed, and without defects. That is our responsibility. You too have a part to play with proper care and maintenance and attention to e-scooters safety rules, our e-scooters will give you years of enjoyment.
• Please read the instructions carefully before using. Do not ride this bicycle until you have read and thoroughly understand the Owner’s manual. It contains information critical to your safety. If you have questions about the operation of this e-scooter, consult your authorized dealer. It is extremely important that you follow the safety guidelines contained in this manual in order to ensure your maximum safety. If you loan your e-scooters to anyone make sure they also know how to operate it safely.
• When using, the load should not be greater than the maximum capacity, and please pay attention to increase the braking distance during rainy or snowy days.
• This e-scooter is not afraid of rain and snow, but it can’t be submerged in water. It will cause short circuit and damage to the electric apparatus, when water submerges the rear wheel center.
• The exposed metal contact on the battery box is positive and negative, can’t be touched at the same time with wet hands, also it can’t be kept in touch with anything metal at the same time, otherwise it will cause short circuit and accidents!
• Please don’t dismantle and repair the spare parts by yourself, please go to the local distributor or the servicing station to repair if necessary.
• Please take time to record the following information:

Recording Your Serial Number

• VIN: ___
• Model: ___
• Color: __
• Date of Purchase: ____
• Distributor: ___

This Manual contain many WARNING notes concerning the consequences of failure to maintain or inspect your E-SCOOTER. A WARNING means that failure to follow the instructions following it may result in injury to the rider or others during use, which may include loosing control and falling. Because any fall can result in serious injury or even death, we do not repeat the warning of possible injury or death whenever the risk of falling is mentioned. A CAUTION on the other hand means that failure to follow the instructions may result in damage to the E-SCOOTER or component during installation or use. (I.e. risk or property （product）damage only).
Thank you for the purchasing the electrical powered Moped, The Moped complies with the Electric Motor Vehicle Safety Regulation.

GENERAL SAFETY GUIDELINES & RESTRICTIONS

1. Don’t weave through traffic or make any moves that may surprise people with whom you are sharing the road.
2. Never carry anything which obstructs your vision or your complete control of the E- SCOOTER or which could become entangled in the moving parts of the E-SCOOTER.
3. Never hitch a ride by holding on to another vehicle.
4. By any physically or mentally challenged person
5. By any person with vision, balance, hearing or coordination impairments
6. By any person using headphones or a cellular phone [ They mask traffic sounds and emergency vehicle sirens, distract you from concentrating on what’s going on around you, and their wires can tangle in the moving parts of the E SCOOTER , causing you to lose control ].
7. To carry more than 15kgs of cargo in the cargo compartment (in addition to the rider).
8. Don’t running over 25 km/h (with or without the motor activated)
9. Don’t using vehicle by barefoot or those wearing sandals, open toed, high heeled, platform or slip on footwear
10. By any person who has ingested any alcohol or drug that could impair their ability to operate the E-SCOOTER.
11. Without 2 hands on the handle bar.
12. Please seated on the seat while running.
13. Don’t jump ramps, curbs, or objects or attempt any stunts.
14. Don’t beyond your ability or prior experience.
15. Don’t stopping with only the front brake. Use both brakes simultaneously.
16. Do not try to accelerate and have the brake (s) on at the same time.
    [ This may cause damage to the motor or drive train or cause the motor or drive train to overheat. ]

NEITHER MANUFACTURE NOR THE RETAIL SELLER OF THE E-SCOOTER IS RESPONSIBLE FOR THE CONSEQUENCES OF FAILURE TO COMPLY WITH FEDERAL AND PROVINCIAL ORDINANCES RELATING TO THE USE OF THE E-SCOOTER.

WARNING: ALWAYS USE A HELMET WHILE RIDING THE E-SCOOTER.

The safety regulations require that you use a helmet like those used by human powered bike riders while riding the E-SCOOTER.
E-SCOOTER should not be used under any circumstances without properly wearing a helmet.

WARNING: IN ADDITION TO THE REQUIREMENTS ABOVE, THE E-SCOOTER IS NOT TO BE RIDDEN / USED:

1. on any roadways where the speed limit is in excess of 25 km/h
2. on any sidewalks or pedestrian walkways
3. on any bumpy, rough or unpaved surfaces
4. in darkness without lights on
5. on sandy or gravel covered surfaces
6. by any person weighing more than 150 Kgs
7. by any person with an inseam of less than 22″

BEFORE EACH RIDE

WARNING

1. Make sure you properly wear a helmet.

2. Wear protective clothing and gloves.

3. Wear eye protection that does not interfere with your peripheral vision.

4. Check local and state laws before operating the E-SCOOTER in any area.

5. Make sure all tail/brake lights, turn signals and headlight are operational.

6. Make sure the horn is operational.

7. Make sure the brakes are properly adjusted and working correctly (see further detailed instructions).

8. Make sure you understand how the brakes work and that your hands can reach and squeeze the levers comfortably and hard enough to stop the E-SCOOTER safely.

9. Make sure all parts of the E-SCOOTER are properly and securely fastened and adjusted, including but not limited to wheels, all controls and cargo (Please refer to Assembly Instructions).

10. Make sure the tires are not excessively worn, do not have tears or cuts, and are properly seated on the rim and inflated to the proper pressure on the sidewall

11. Make sure the wheels spin straight and that the rims are not bent or damaged (front wheel must be undamaged for front brake to work properly).

12. Make sure the throttle is in the “OFF” position before turning E-SCOOTER key on.
    This will prevent the E-SCOOTER from moving forward without notice once the ignition key is turned.

13. Make sure the “Air Switch” under the seat is in the “On” position before turning key on.

AFTER EACH RIDE:

1. 1. Make sure that the ignition key is turned OFF and that all keys are removed and kept in a safe place.
   2. Make sure to plug the battery on charge.
   3. Make sure the throttle is rotated to the off position
   4. Ensure the E-SCOOTER is not kept outdoors or where moisture can damage it
   5. Do not charge or store the E-SCOOTER closer than 20 feet from any flame (e.g. furnace, fireplace, water heater, space heater).
   6. Do not allow children under 16 to play on or near the unattended E-SCOOTER.

WARNING FAILURE TO FOLLOW THESE OPERATION INSTRUCTIONS CAN RESULT IN SERIOUS INJURY OR DEATH OR COULD RESULT IN AN ELECTRICAL SHORT AND OR FIRE.
WARNING DO NOT MAKE ANY ALTERATIONS OR MODIFICATIONS TO THE MOTORINOTM , OR ADD ANY PARTS NOT AUTHORIZED BY Manufacturer EXCEPT THOSE DISCUSSED IN THIS MANUAL OR THOSE REQUIRED BY LAW. DO NOT REMOVE ANY REFLECTORS, LIGHTS OR OTHER STANDARD EQUIPMENT. DOING THAT WILL VOID YOUR WARRANTY.

All authorized replacement parts are listed on the parts list enclosed or by calling your local dealer.

NOTICE: Before you start assembly:
Inspect the shipping container for significant damage. Then remove all packing material and components from the box.
Before mounting, make sure that the main circuit breaker is off.
Estimated time required for installation:

• Allow at least 30 minutes for installation.
• 6-10 hours should be enough to charge the battery (in no case should it recharge more than 14 hours).

Assembly tools (not included):

VEHICLE INSTRUCTIONS AND ASSEMBLY INSTRUCTIONS

Each electric scooter was carefully assembled and inspected before leaving the factory. You have to install the pedals.
Follow the installation instructions.
Tools Required: Key; hex key; screwdriver, etc.

List of Parts.

1. Hand throttle
2. Brake lever
3. LCD display
4. Front light
5. Battery under step
6. Rear suspension
7. Front basket
8. Front fork
9. Mudguard
10. Pneumatic
11. Drum brake
12. Pedal
13. Stand

INSTALLING THE WHEEL AND FRONT BRAKE

Installation tools: Wrench No. 14*2

1. Install the drum brake in the hub → install the bushing on the other end of the hub install the front wheel into the front fork, pay attention to the drum brake to be clamped to the positioning post of the front fork → install the axle and lock it with two No. 14 wrenches.
2. Pass the brake cable tube into the fork shoulder cable hole → put the brake cable end into the drum brake hole → put on the long spring and install the hollow column put the brake cable end through the hollow column and twist the brake nut (if the wire core Not long enough, please check if the brake cable is not stuck in the brake lever).

INSTALLING THE HANDLEBAR
Installation tools: Allen Wrench No. 6

1. Place the handlebar module on the steering column.
2. Connect the handlebar module to the steering column using 4 screws with a front cover.
3. Adjust the proper handlebar angle and lock the handlebar cover with an allen wrench No. 6

INSTALLING THE DISPLAY AND HANDLEBAR COVER
Installation tools: Installation tools: Phillips screwdriver

1. The display is fixed by two phillips screws.
2. Install the plastic handlebar cover and tighten the set screws.

INSTALLING THE TURN LIGHT AND REFLECTOR

1. Push directly into the hole until you hear a click.
2. Yellow reflectors should be installed on both sides of the front fork.

INSTALLING THE FRONT BASKET
Installation tools: Phillips screwdriver

1. Position the front storage basket to the front frame.
2. Use the two screws and longer metal to fix the back of the basket.
3. Use the two longer screws and shorter metal to fix the bottom of the basket

INSTALLING THE PEDALS
Installation tools: Wrench No. 15
Warning: Do not tighten by force, as the handles are made of aluminum alloy.

1. The right pedal (marked “R” on the pedal shaft) must be mounted on the crank on the right and tightened clockwise.
2. The left pedal (marked with symbol “L”) is mounted on the crank on the left and tightened firmly counterclockwise.

INSTALLING THE BACKREST OF THE TAILSTOCK
Installation tools: Wrench No. 10

INSTALLING THE FEET PADS FOR THE TAILSTOCK
Installation tools: Phillips screwdriver

1. There are two sets ,need make clear which set is left side and right side.
2. First, to install the metal parts, you need to sandwich the bracket of the rear fender,and usd wrench No. 10 to fasten the iron plate to the frame.
3. Use a screwdriver to attach the plastic pedal to the iron plate.

BATTERY AND CHARGING INSTRUCTIONS

1. For 12Ah
2. For 20Ah
   Two plastic posts in the middle need to be removed.

WARNING!

• Store batteries in a dry, warm environment.
• Keep the batteries charged at all times.
• If you park in an outdoor or cold environment, the battery must always be charged, otherwise it will be irreversibly damaged.
• If the scooter is not used for a long time, the battery will self-discharge, so it is recommended to check the battery condition continuously so that the voltage does not drop below the critical value when the battery can no longer be charged.
• Any claims concerning a battery damaged due to such improper treatment will not be accepted.
• Use only the charger designed for this electric scooter (never use a charger from another model). Before charging, set the switch to the OFF position and remove the key. Use the charger in a dry and well-ventilated area.
• The charger is for indoor use only. Protect the charger from water to avoid short circuiting. Do not use in wet, flammable, or explosive environments. Do not remove the plug by pulling the cord, always grasp the charging port by the metal body.
• First, plug the charger’s output plug securely into the battery receptacle, and then insert the input plug into a power outlet. The charger indicator lights up to indicate that charging is in progress.
• When the light changes from red to green, it indicates that the battery is fully charged. Typically, it will take approximately 6-10 hours for the battery to fully charge. lf you have time, it is recommended to charge it for 2 more hours after the indicator light turns green. (This will positively affect battery life).
• When the green light is on, the charger is in a maintenance charging state. lf you are away for a long time, you should remove the charger plug, especially in hot weather.
• The charger heats up during charging, so keep it away from heat. Always keep the charger dry and clean. The electronics inside are under high voltage, so never disassemble it yourself.
• After charging, first unplug the power plug and then remove the output connector from the battery. Do not leave the charger plugged into a battery or wall outlet for an extended period of time as this may damage the charger and cause a fire.
• Keep the charger out of the reach of children while charging. Do not place anything on the charger or allow any liquid to come into contact with the charger.
• The first 10-15 charges are unstable, the charging time can be up to 12 hours, and the charge indicator on the scooter display can show a partially discharged battery. After formatting the battery, everything will be fine
• Furthermore, the battery is protected by its own fuse 30A, which is stored from the side of the plastic battery pack and secured with a plastic screw cap.

Charger has three charging options:

1. Remove the battery from the under-seat part, bring it to the electrical outlet and start charging
2. Disconnect the battery in the under-seat part from the power connector, connect the charger and charge
3. The e-scooter has, above the rear wheel in the fixed part of the mudguard, a connector for connecting the charger.

The charger has 2 diodes. The first (red) lights up when the charger is plugged in, while the second signals charging. When the charger is connected, the first red light comes on immediately and the second one lights up green, then red when everything is OK. lt will glow green again when fully charged.

• WARNING DO NOT CHARGE OR STORE THE MOTORINOTM CLOSER THAN 20 FEET FROM ANY FLAME (E.G. FURNACE, FIREPLACE, WATER HEATER, SPACE HEATER)
• WARNING DO NOT KEEP THE CONNECTED TO THE CHARGER FOR LONGER THAN 18 HOURS UNDER ANY CIRCUMSTANCES! DOING SO COULD CAUSE THE BATTERY OR CHARGER TO OVERHEAT AND CAUSE A FIRE.
• WARNING DO NOT COVER THE THE CHARGER WHILE CHARING.DOING SO COULD CAUSE THE CHARGER TO OVERHEAT AND CAUSE A FIRE.
• WARNING DO NOT CHARGING UNDER THE RAIN DOING SO COULD CAUSE THE CHARGER SHORT CIRUIT.
• WARNING DO NOT CHARGING WHILE THE TEMPERATURE LOW THAN 5℃ DOING SO COULD CAUSE REDUCE THE EFFICIENCY OF THE BATTERY.
• WARNING DO NOT CARRY THE CHARGER IN THE VEHICLE UNLESS CUSHIONED UNDER THE CHARGER.
• WARNING NEVER LEAVE THE 220V BATTERY CHARGER CONNECTED TO THE POWER SOURCE IN AMERICAN AREA.
• WARNING KEEPING THE CHARGER PLUGGED INTO THE 110V/220V POWER SOURCE AND NOT THE BATTERY DOING SO COULD CAUSE THE BATTERY TO OVERHEAT AND OR CAUSE A FIRE.
• WARNING FAILURE TO KEEP THE E-SCOOTER BATTERY CHARGED WILL CAUSE TOTAL BATTERY FAILURE. DO NOT ALLOW BATTERY TO BECOME FULLY DISCHARGED!!! ALWAYS RECHARGE THE BATTERY BEFORE THE POWER INDICATOR ON THE INSTRUMENT PANEL SHOWS NO POWER. ALLOWING THE BATTERY TO FULLY DISCHARGE WILL REDUCE BATTERY LIFE AND MAY RUIN THE BATTERY OR COULD CAUSE THE BATTERY OR CHARGER TO OVERHEAT AND CAUSE A FIRE THE NEXT TIME THE E-SCOOTER IS CHARGED.
• WARNING BATTERY POSTS, TERMINALS, POWER CORDS AND BRAKE CABLES MAY CONTAIN LEAD AND LEAD COMPOUNDS, AND OTHER CHEMICALS. WASH HANDS AFTER HANDLING. WARNING IF YOU HAVE ANY DOUBT ABOUT THE CONDITION OF THE SCOOTER OR ANY OF ITS PARTS, DONT USE IT . CALL YOUR E-SCOOTER DEALER.

BATTERY RECYCLING
When maintained and used properly, (by following charging and storage guidelines), the Lead Acid Battery Pack used in this product has a normal lifespan of two to three years. When the battery pack no longer holds a charge or is unable to be charged properly, it should be removed from the vehicle and delivered to a recycling facility. Federal Laws prohibit disposal of lead-acid batteries in everyday trash. Please contact your local solid waste or recycling authority for recycling information in your area.

OPERATING INSTRUCTIONS – SAFE DRIVING

• Follow the Road Traffic Regulations. Do not transport other persons on this electric scooter.
• Read this manual carefully and make sure you fully understand it and that you are able to drive the electric scooter before heading out on the road.
• Do not lend the electric scooter to anyone who is unfamiliar with how to operate it.
• Check regularly that the battery is properly charged.
• Check the condition of the brakes before each journey. lf necessary, adjust them carefully to make sure they work properly. Brake early and always reduce your travel speed when it rains or snows.
• Always hold the handlebar with both hands.
• Drive in such a way that no limbs or other objects come into contact with the cha in or wheels.
• Do not touch the battery charging connector with a wet hand, wrench, or other metal object, as this wil I damage the battery pole and cause a short circuit.
• Wear bright colors when driving at night to be clearly visible to drivers of other motor vehicles.
• Qnly one person can drive this electric scooter, 2 for a short time, but the maximum load is 150 kg. Do not drive under the influence of addictive substances, alcohol or medication that could affect your ability to operate a motor vehicle.
• Do not drive in poor conditions, such as uneven, wet or unpaved surfaces.
•  lf possible, do not drive in poor weather conditions, poor visibility or if you are very tired.
• This electric scooter can be operated in rainy weather, but its control unit, motor or other electrical devices must not be submerged in water. This could cause a short circuit and could result in an accident.
• Never use spray water to wash your electric scooter to avoid its electrical components getting wet (battery connector, motor, control unit, cables, handlebar controls, etc.)
• This electric scooter must not be driven by persons under 16 years of age.

Check before driving for the first time:

• Before leaving the factory, an escooter exit check was performed – but check the following before driving for the firsttime:
• First, make surethe battery is fully charged and correctly positioned.
• Check the front and rear brakes and make sure they work pro perly.
• Check the tires and make surethey are well inflated.
• Check that the front and rear wheels are properly secured.
• Check the pedals to make sure they are properly secured and that all lock nuts and bolts are tightened properly.

DRIVING POWER SYSTEM INSTRUCTIONS

Description OF REMOTE CONTROL WITH ALARM
After pressing the stop button, if the rear wheel is completely locked and cannot be pushed when the vehicle is pushed, even if the throttle is turned in Key On state, the motor will not rotate and the alarm will not sound;
Press the lock button of the remote control car to release parking;

• DRIVING
  First turn the ignition key to the “ON” position. You will see the battery charge level on the batterystatus indicator.

  • Pointer location:
  • [H]: The battery is sufficiently charged
  • [L]: The battery is not charged enough The position of the pointer in the red box indicates that the battery is low and needs To be recharged.
  • You can then easily start the electric scooter by turning the throttle handle (anti-clockwise). Accelerate gradually, do not attempt to reach maximum speed immediately, which would overload electrical components and battery. Gradual acceleration saves both battery and engine. The brake has the function of cutting off the power supply. If one of the brakes is pressed, the power supply is automatically cut off and the motor is switched off. Using the parking brake or releasing the throttle automatically cuts off the power to the engine. However, you should avoid attempting to use the throttle at the same time as braking to avoid overloading the engine. The electric scooter control unit is equipped with an overvoltage protection. If the battery is running low and you are going uphill or against a strong wind, the surge protector will limit the speed. If you can use the pedals in such a situation, this will help the electrical system function properly. This electric scooter is also equipped with low voltage protection. If the battery is running low and the accelerator pedal is still used, the battery may be seriously damaged. Therefore, in this case, the power supply is automatically cut off.
  • Attention: If the ignition key is in the “ON” position and the driver moves the throttle handle, the escooter will move! Do not put the key in the ON position until you are ready to go. After starting, accelerate slowly and smoothly and do not attempt to reach maximum speed quickly, otherwise electrical components may be damaged. If you push the e-scooter, turn off the power supply to avoid accidentally moving the throttle handle and causing the e-scooter to move unexpectedly, which could cause an accident. Use the brakes wisely and only when necessary.
  • Battery Level Meter: If the battery level decreases and the indicator goes to [L] you should turn off the battery and fully cha「ge the battery as soon as possible.
  • Notes: Do not expose the electric scooter to sunlight or rain for long periods of time, as this could negatively affect the operation of some electrical components.
  • Special note: If you frequently use the brakes or if you start and stop the engine frequently, if you are driving upwind or uphill, or if you exceed the permissible weight of the load, this will affect battery performance and range. If you want to positively influence the range, follow these tips:
  • a) Turn the throttle handle continuously to increase the speed gradually.
  • b) Do not brake too often – only when necessary.
  • c) If possible, do not start or turn off the electric scooter too often.
  • d) If you want to start, it is always best to do this only after moving the electric scooter a bit.

GENERAL USAGE NOTES

It is a good idea to keep a TOOL KIT and FIRST AID PACKET with you when you ride.
If your E-SCOOTER sustains an impact:

WARNING A CRASH OR OTHER IMPACT CAN PUT EXTRAORDINARY STRESS ON COMPONENTS, CAUSING THEM TO FATIGUE PREMATURELY. COMPONENTS SUFFERING FROM STRESS FATIGUE CAN FAIL SUDDENLY AND CATASTROPHICALLY, CAUSING LOSS OF CONTROL, SERIOUS INJURY OR DEATH. First, check yourself for injuries, and take care of them as best you can. Seek medical help if necessary. Next, if your E-SCOOTER is damaged, perform the checks described in this manual. If you are unable to fix any or all damage/problems, or if you find any bent, scored, or discolored parts, please call your local SCOOTER dealer.
Break-in Period: Your E-SCOOTER will last longer and work better when it is broken in properly. Brake control cables, axle nuts may get loose when a new E-SCOOTER is first used and may require an adjustment. We suggest that the brakes and axle nuts be checked every 30 days and adjusted if necessary.

MAINTENANCE

Technological breakthroughs have made components more complex than ever before, and the pace of innovation is increasing. This ongoing revolution makes it impossible for this manual to provide all the information required to properly repair and/or maintain your E-SCOOTER In order to help minimize the chances of an accident and possible injury, it is critical that you have all repair and maintenance work performed regularly.
For more detailed maintenance instructions or for ordering replacement parts please contact your E-SCOOTER dealer. Local bicycle retail stores, which have service facilities in your area, can also assist you with certain non- electrical repairs or adjustments that you are not qualified to make or for which you do not have the specific or specialized tools needed for repair.
The fact that this vehicle have no combustion engine, no clutch, no ignition plugs, no carburetor, and uses no gasoline means it requires basically no maintenance.
In generally all the regular mechanic maintenance is to:

• Adjust the brakes
• Check the nuts and bolts
• Check tire pressure

ATTENTION: To carry out maintenance, first switch off the electric scooter and remove the ignition key.

• Regular check:
  Regularly check the condition of your electric scooter and make regular checks for proper tire inflation, check the sensitivity of the brakes, tighten all components, and make sure they do not make any unusual noise or abnormal noise when driving.

• Brake adjustment:
  Proper adjustment of the brakes will promote the correct operation of the warning lights and increase driver safety: The brakes are adjusted in a similar way to each norma I wheel. lt is important that the brakes work properly and that the electrical disconnect devices are in working order (cable to the brake levers). There is a micro-adjustable rear drum brake nut that allows you to very easily adjust the response of the brakes to the push. Once the brakes are set, turn the wheels to see if there is any chafing. Also make sure that if any of the brakes is pressed, the power cut function will be activated and the motor will stop.

• Lubrication:
  To ensure the long life of your electric scooter, the following components should be regularly lubricated every 6 months: Front axle; cha in; rear axle; the i dle, front fork and other moving parts must be lubricated only with grease and the brake must not be filled with grease at all. Electrical components do not need to be specially cleaned as they have been lubricated at the factory. lf any defect is found, contact an authorized service center.

• Cleaning:
  The electric scooter should be cleaned with a damp sponge, but care should be taken to avoid electrical parts coming into contact with water (battery connection, engine (rear axle), electrical cables, handlebar controls, etc.). Dry with a cloth. Do not use a strong stream of water when cleaning the electric scooter. Use cloth to avoid short circuiting electrical components. Your electric scooter is durable and does not require waxing. lf necessary, clean with a mild detergent and rinse aid to restore its original shine.

TROUBLESHOOTING

WARRANTY INFO

Manufacturer warrants to the original retail purchaser (“you”) that the E-SCOOTER for which this warranty has been issued is free from defects in material and workmanship as follows:

• 12 months warranty
  • Frame,
  • Electric Motor,
  • Controller and electric circuits
  • Battery and charger

This warranty is not transferable to a subsequent purchaser. The manufacturer’s sole obligation under this warranty is to repair or replace the product at manufacture’s option. Manufacture must be notified in writing of any claim under this warranty within 15 days of any claimed lack of conformity of the product. Immediate report to the E-SCOOTER dealer is required if abnormal behavior of the product is noticed.

WARRANTY LIMITATIONS:
The duration of any implied warranty or condition, of merchantability for a particular purpose, or otherwise, on this product shall be limited to the duration of the express warranty set forth above. In no event shall E-SCOOTER dealers be liable for any loss, inconvenience or damage, whether direct, incidental, consequential or otherwise, resulting from breach of any express or implied warranty or condition, of merchantability for a particular purpose, or otherwise with respect to this product, except as set forth herein. Some provinces or countries do not allow limitation on how long an implied warranty lasts and some do not allow exclusions or limitations of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which may vary, from location to location. This warranty will be interpreted pursuant to the laws of EUROPE or NA. This warranty is not intended to confer any additional legal, jurisdictional or warranty rights to you other that those set forth herein or required by law. If any portion of this warranty is held to be invalid or unenforceable for any reason, such finding will not invalidate any other provision. For products purchased in countries please contact a E-SCOOTER authorized distributor in that respective country.

WARRANTY SERVICE OPTIONS:
To obtain service under this warranty you must Call E-SCOOTER dealer for Customer Service/Technical Support on your Product BEFORE returning your Product back to the place of purchase. If you return your Product for warranty service you must obtain a return authorization number by contacting dealer. Send your product (with the return authorization number on the outside of the shipping container and affixed to the product), together with the retail seller’s original receipt or other satisfactory proof of the date of purchase to the dealer you have purchased it from
THE PRODUCT MUST BE RETURNED IN ITS ORIGINAL BOX, ALONG WITH ALL KEYS, CHARGER, MIRRORS & LOCKS, FLOOR MATS, AND ANY OTHER ACCESSORIES THAT CAME WITH YOUR UNIT. DUE TO TRANSPORTATION AND RECLAMATION ISSUES, IF THE PRODUCT IS NOT IN THE ORIGINAL PACKAGE IT MAY NOT BE RETURNED UNDER ANY CIRCUMSTANCES.
Any postage, insurance or other shipping costs incurred in sending your product for service under either option above is your responsibility. Manufacture will not be responsible for products lost or damaged in shipping.
Warranty Exclusions are listed below:

• Retailers and sellers are not authorized to modify this warranty in any way. It is your responsibility to regularly examine the product to determine the need for normal service or replacement. This warranty does not cover the following
• Products that have been modified, neglected or poorly maintained, used for commercial purposes, misused or abused or involved in accidents.
• Damage occurring during shipment of the products (such claims must be presented Directly to the shipper).
• Damage to products resulting from improper assembly or repair, the use or installation of parts or accessories not compatible with the original intended use of the product, or the failure to follow the product warnings and usage instructions.
• Damage or deterioration to the surface finish, aesthetics or appearance of the product.
• The labor required to remove and/or re-fit and re-adjust the item covered by this warranty.
• Normal wear to the product.
• Light bulbs and tubes
• Any products for which the consumer does not follow the warranty procedures outlined above.

Scan the QR code for other languages versions:

Version: 2023/02-17
Technical support and service:
e-mail: pavel.kozeluh@rulyt.cz
reklamace@rulyt.cz
More informations on: www.motoe.eu

References

• Motoe
• Motoe

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>