RACCEWAY MONA Electro Scooter Green Metallic User Manual

RACCEWAY MONA Electro Scooter Green Metallic

FOREWORD

This product is designed for transportation and is environmental friendly. Below are the characteristics and advantages of the electric scooter.

• High-efficient brushless DC motor.
• Digital controller with indicator and protection from over voltage and under voltage.
• Brake system with power cut-off ability to ensure safe riding.
• 30Ah battery with high performance offering stronger current and longer distance for drive.
• Front and rear suspension system providing a smooth and comfortable riding.

Warning Driving age according to local laws and ordinances that govern and/or restrict the use of electric bike. The laws and ordinances vary greatly from municipality to municipality. It is your responsibility to know and abide by your local restrictions.

RIDING SAFELY

• Always wear an approved helmet when riding your scooter, and follow the helmet manufacturer’s instructions for fit, use and care of your helmet.
• When riding obey the same road laws as all other road vehicles, including giving way to pedestrians, and stopping at red lights and stop signs.
• Ride predictably and in a straight line. Never ride against traffic. Ride defensively. To other road users, you may be hard to see. Use correct signal lights to indicate turning or stopping.
• Concentrate on the path ahead. Avoid potholes, gravel, wet road markings, oil, curbs, speed bumps, drain grates and other obstacles.
• Expect the unexpected such as opening car doors or cars backing out of concealed driveways. Be extra careful at intersections and when preparing to pass other vehicles.
• Familiarize yourself with all the scooter’s features. Practice signal lights, braking and the use of horns.
• Don’t carry packages or passengers that will interfere with your visibility or control of the scooter. Don’t use items that may restrict your hearing.
• Maintain a comfortable stopping distance from all other riders, vehicles and objects. Safe braking distance and forces are subject to the prevailing weather conditions.
• Please ride slow when road condition is bad.
• Please do not exceed the loading capacity. This will affect the driving distance.

Wet Weather

• In wet weather you need to take extra care.
• Brake earlier, you will take a longer distance to stop.
• Decrease your riding speed, avoid sudden braking, and take corners with additional caution.
• Be more visible on the road.
• Wear reflective clothing and use safety lights.
• Potholes and slippery surfaces such as line markings and train tracks all become more hazardous when wet.

Night Riding

• Ensure that the front lights are on.
• Wear reflective and light colored clothing.
• Ride at night only if necessary. Slow down and use familiar roads with street lighting, if possible.

CAUTION : Modification is illegal. A modified vehicle will affect its structure or performance, which will result in shortening the vehicle’s life. Modified vehicle will not covered by warranty. It is necessary to buy original spare parts from authorize22d dealers. No guarantee can be provided either for quality or durability when buying not original spare parts from the market.

WARNING : Once you have completed the initial charge you are ready to ride. You must be aware of all local laws and ordinances that govern and/or restrict the use of electric bike. The laws and ordinances vary greatly from municipality to municipality. It is your responsibility to know and abide by your local restrictions.

TECHNICAL INFORMATION

• Model                                : MONA
• Product size                        : 1725 (L) × 735 (W) ×1035 (H) mm
• Wheelbase mm                    : 1245 mm
• Product Weight                    : 59kg
• Carrying capacity                 : 150kg
• Single charge                      : 50km
• Max speed                                : 45km/h
• Type of motor   : brushless DC motor
• Motor power                                : 1500W
• Battery                              : 60V20Ah
• Battery type                        : lead acid battery
• Life of storage battery: approximately 300 cycles
• Charger input             : AC 220V or 110V (optional)
• Charging time                        : 6-8 hours
• Charger output                    : 60V3.0A
• Tire size                                       : 3.5-10

INSTRUMENT PANEL

• 1 & 6. Rear mirror (LR)
• 2 & 7. Brake levers (LR)
• 3. Front light on/off switch: selecting for turn on the front light, selecting for turn off the front light.
• 4. Speed: Show the speed.
• 5. Battery indicator: H means full battery, L mean low battery. When the needle pointed to yellow area, remain half battery. When the needle pointed to red area need recharge battery.
• 8. Accelerator: Please check the indicator light is working on the instrument panel once the power has switched on. Press the accelerator to anticlockwise, the scooter start moving. The speed depends on the turning angle. 25
• 9. turning signal switch：Symbol means turn left; means turn right; press the switch to the middle and the signal will stop.
• 10. Bugle switch: Press the switch and the bugle is on.

CAUTION : Do not use horn in the no horn area.
NOTES : The above spare parts are only for reference. Any changes of spare parts or technology upgrades will presented to the final product without prior notice.

Main switch: （Different vehichles might use different symbols）

1. Lock cover on/off key: Inserts (a) into (c) and turning it to clockwise and lock cover (b) will be open. Contrarily, lock cover will be locked when turned anticlockwise.
2. Power switch : Inserts the key into (b); turn from to position and power will on. Contrarily, power will off.

Warning : Never push the scooter when the handle bar has locked; it will fall down when losing balance.

CHARGING THE BATTERIES
Before riding the electric scooter for the first time, you must charge the batteries for 6-9 hours using the supplied charger.

IMPORTANT CHARGING INSTRUCTION

The Power Switch Lock must be in the Off position when the electric scooter is being charged.
The scooter is using 48V lithium battery. You should charge your electric scooter after each ride. You must charge your electric scooter if it has not been used for 30 days or more. Recharging time is between 5-7 hours.
A. charging on the scooter: Off the scooter by pointed the key to ”. Insert the output plug to the charging socket of the scooter（refer ①）and connect the input plug 220V / 110V to the wall socket ( refer ②). The battery in fully charged when the charger indicator shows green. Suggest giving extra 1-2 hours charging time to achieved better battery condition. Remove the charger input plug follow by the output plug when completed charging.

B. Remove the battery box from the seat buck:

a. Turn the ignition lock to “SEAT”，then press and open it. Disconnect the plug from the battery case carefully.
b. Insert the output plug to the charging socket of the battery case（refer to ①）and connects the input plug 220V / 110V to the wall socket (refer ②). The battery in fully charged when the charger indicator shows green. Suggest giving extra 1-2 hours charging time to achieved better battery condition. Remove the charger input plug follow by the output plug when completed charging.

Warning

1. Do not place the battery near heat or fire. Do not expose the charger near water.
2. For safety, please use the exclusive charger to charge the battery. Please follow the charging instruction.

Kickstand

1. Double kickstand: Use for long time parking.
2. Single kickstand: Use for temporally parking.

WARNING : Single kickstand function as circuit cut off system prevents scooter moving when pressing the accelerator by no intention. The scooter will start only when the single kick stand has been folded up.

Footboard
Do not put any heavy things on the footboard. This will affect the scooter’s balance and caused dangers.

Seat

1. Seat lock: Turn and press the key to “SEAT” position and the seat can be lifted up.
2. Press the seat down and it will be locked automatically.

Front & rear brake – hub brake
Before the right and left brake levers start function it’s in the free path condition. We can get the free path (10-20mm) by adjusting the adjustable nut clockwise or anticlockwise.

WARNING:

1. The brake is adjusted according to its sensitivity. We should press both front and rear brake to give better braking process.
2. Avoid brake continuously for a long period of time because that may overheat the brakes and reduce its braking efficiency.
3. When pressing the brake levers, please release the accelerator. Check below spare parts before riding the scooter:

RIDING INSTRUCTION

1. Fold up the kickstand and hold onto the handlebars with both hands. Assume a well-balanced position on the scooter and push off with your foot.
2. ON the power (turning the key from “ ” to “ ”) your right hand will control the accelerator.
3. Twist the accelerator slowly to avoid a sudden rush of speed forward. The speed of the bike will increase as you twist the accelerator more. Release the accelerator and apply the brakes to stop your scooter. You will control the speed of the scooter by using both the accelerator and the brakes. When the brake handle is squeezed it cuts power to the accelerator.

TROUBLESHOOTING GUIDE

accelerator is not operating properly.

2.  The single kick stand not fold up, power cut off.

| 1.  Replace the accelerator. Call Customer Service at to order a new accelerator.

2.  Folded up the single kick stand.

The power indicator not working when power on| 1.  The fuse or fuse socket has burnt.

2.  The battery box not place properly.

| 1.  Replace the special fuse or fuse socket.

2.  Adjust the battery box in proper way.

---|---|---
Distance per charge is lesser than normal.| 1.  Not enough air pressure in the tires.

2.  Not enough charging or battery is defective.

3.  Stopping and starting up frequently, over loaded, riding uphill, strong wind.

| 1.  Inflate the tires.

2.  Recharge battery or replace battery. Call Customer Service to order a new battery pack.

3.  Ride under good weather condition and even roads, and regular speed.

Electric scooter is losing speed.| 1.  Low battery

2.  Battery is defective

| 1.  Recharge your battery for 5-7 hours.

2.  Replace battery. Call Customer Service at to order a new battery pack.

Accelerator not working| 1.  The brake cables not in position and cause circuit cut off.| 2. Adjust and reposition the brake cables.

MAINTAINANCE AND ADJUSTMENT

Battery
To prolong battery life, store the scooter in garage to prevent low temperatures and affect the battery performance.

1. Do not dismantled or dispersed the battery cells.
2. Keep away the battery from children.
3. Do not connect cathode and anode of charger during charging and discharge process. Prohibited to use any conductor to connect both cathode and anode. This will cause short circuit.
4. Prohibited battery dip in the water.
5. Prohibited placed the battery in the temperature over 60℃ next to the high-temperature heat source, such as ingle, heating, etc.
6. Prohibited knock on, throwing and trample the batteries, etc.
7. Prohibited edge tool or nails lacerate and cut through the battery.
8. If the leak occurred, electrolyte has come into the eyes, please do not rub. Wash immediately with plenty of water.
9. If the battery in smell, heat, smoke, changed colors, distortion or any abnormal, stop using the battery and away from it immediately.

The Regulations on the storage and usage of lithium iron phosphate battery
To extend the battery life and be Intelligent Use of li-battery here are the regulations:

Firstly: Requirements on charging and discharging

1. Charge:the charger must be the assorted one . First, connect the power to the charger. Second, insert the charger’s out-put connector to the battery’s in-put connector. Third, when the signal light is on, please pull out the battery’s in-put connector first. The common single charging time is about 6-8 hours. if the battery be blow-up, the charging or discharging must be stopped.
2. Avoid over discharge: charge the battery timely after discharging, in order to avoid the over-discharge.

Secondly: Requirements on storage

1. li-battery cannot be stored at the palace where is over hot and over humidity. therefore the temperature of the storage should between -20 to 55degree,and further more the storage must be kept in dry, clean and the battery should not be piled up.
2. the battery cannot be stored for a longtime without charging. The battery should be charged once a month. The battery should be stored with fully charged.

Thirdly: Maintenance

1. When you test the voltage of the single piece of the battery-cell, you have to test the cell directly, not by the wire. By doing that, it can avoid the voltage decline.
2. You have to wear the glove or clip the finger nails before you take out the single piece of the battery. So as to avoid damage the cover of the battery.
3. Forbid bending the battery cell, the top edge of the seal-up. And also the falling , hitting and short circuit are prohibited .
4. When you re-assemble the battery, there are some special notes we have to concerned in mind. The temperature of the electric iron should below 350℃; the welding time must be less than 3 seconds; and the frequency of welding should be no more than 5 times; the second welding must be done after cooling.

Cleaning:

• Never use high water pressure to wash the scooter. Soaked electrical parts and wiring will affect the performance.
• Never apply lubricant to the drum brake and the tire.
• Use lubricant to clean the metal parts of the scooter.
• Use cleaning agent to clean the painting plastic parts surface and wipe up by cloth.

Brake inspection
Front and rear hub brake main checking points:

1. Press the connecting link (1), screw the adjustable nut (3), at the same time holding the brake handle (2) and lead the brake lever achieved braking distance at 1/3-1/2,. Let the rear brake shoes attached well to the brake tray. Press the brake levers and when it reached the braking efficiency, tighten the adjustable nut.
2. The best distance for brake shoes and hub tray is 1.5mm.
3. Replace brake shoes when the usage surface has reached 1/2.

Charger inspection

1. Use only special or original charger. Difference country may use difference charger. Do not mess-up 220V and 110V charger.
2. The Power Switch Lock must be in the position when the electric bike is being charged.
3. Do not up side down the battery box during charging.
4. Check the charger socket if the welding work still in good condition.

Motor and controller maintenance

1. During raining season, do not let the water go over the motor centerline. This is to protect motor from burnt and broken.
2. Do not press both brake lever and accelerator when starting the motor to prevent damaging other parts.
3. Slow down the scooter when the road condition is not good. High librations will interrupt the electrical parts connection.

Regular maintenance
check● adjust◆ replace▲ lubricate ■

www.motoe.eu

References

• fusibles.2.La
• Motoe

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>