logitech MX BRIO UHD 4K Webcam User Guide
- June 2, 2024
- Logitech
Table of Contents
logitech MX BRIO UHD 4K Webcam
Product Information
Specifications:
- Webcam Model: MX BRIO
- Connection: USB-C 3.0
- Features: Privacy shutter, Dual noise reduction microphones, Magnetic mount receiver
Product Usage Instructions
- Step 1: What’s in the Box
1. Webcam MX BRIO
2. USB-C 3.0 cable
3. Mount clip with removable mount adaptor
4. User documentation- Step 2: Determine Mount Placement
1. Determine the best placement for your webcam.
2. Wipe the back of your monitor to clear any dust or dirt.
3. Remove the protective film from the micro-suction pad.
4. Place the mount on top of your monitor and firmly press the micro-suction pad to create a good bond.
5. Rotate the rear foot down until it makes contact with the back of the monitor.- Step 3: Mount Adaptor Removal and Cleaning
1. Remove the webcam from the mount and gently peel off the adaptor.
2. Clean the micro-suction pad with a wet finger and let it air dry completely before remounting.
3. Repeat the monitor placement setup steps to redeploy your webcam.-
Step 4: Attach Camera to the Mount
Place the webcam into the magnet attachment point on top of the mount until you hear an audible click. -
Step 5: Connect the Webcam via USB-C & Get Started
1. Connect the USB-C connector to your computer, monitor, laptop, or docking station.
2. Rotate the dial at the front of the webcam to open/close the privacy shutter.
3. Adjust the webcam by turning side to side and tilting up and down for optimal framing during video meetings.- Step 7: Show Mode
Easily show physical items in video calls by tilting the camera down. Use one hand to tilt the camera down to show your desktop and back up to show yourself.
Frequently Asked Questions (FAQ)
-
How do I clean the micro-suction pad?
Use a wet finger to gently rub the pad clear of dust and dirt. Let it air dry completely before remounting. -
How do I adjust the webcam for video meetings?
Turn the webcam side to side and tilt up and down to find the best framing for your video meetings.
KNOW YOUR PRODUCT
MX BRIO FRONT VIEW WITH FUNCTION INDICATIONS
MOUNT DESIGN OVERVIEW
INSTALLATION INSTRUCTION
- STEP 1: WHAT’S IN THE BOX
1. Webcam MX BRIO
2. USB-C 3.0 cable
3. Mount clip with removable mount adaptor
4. User documentation- STEP 2: DETERMINE MOUNT PLACEMENT
Placement to allow one-handed camera adjustments (using micro-suction pad)
1. Determine the best placement for your webcam before continuing.
2. Wipe the back of your monitor to clear any dust or dirt.
3. Remove the protective film from the micro-suction pad.
4. Open the mount fully and place on top of your monitor, being sure that the pad of the front clip makes contact with the front of the monitor.
5. Rotate the rear foot down until it makes contact with the back of the monitor.
6. Press the micro-suction pad to the back of your monitor firmly to create a good bond. Note:
* The mount adaptor can be removed and reused for mounting adjustments without leaving residue.
* To clean the micro-suction pad, rinse with water to remove debris, and let it air dry in order to regain strong suction.-
(Optional) Placement without the micro-suction pad
Slide the removable mount adapter down to remove it from the webcam foot. Adjust the foot on the mounting clip until it is flush with the back of your device and press firmly in place. -
STEP 3: MOUNT ADAPTOR REMOVAL AND CLEANING
1. Remove the webcam from mount and gently peel the adaptor from one corner to remove.
2. With a wet finger gently rub the pad clear of dust and dirt and let the micro-suction pad air dry completely before remounting (do not use cloth or tissue to dry).
3. Repeat the monitor placement setup steps to best deploy your webcam.-
STEP 4: ATTACH CAMERA TO THE MOUNT
Place the webcam into the magnet attachment point on top of the mount. Listen for an audible click indicating the webcam is properly seated on the mount .
-
STEP 5: CONNECT THE WEBCAM VIA USB-C & GET STARTED
1. Plug the USB-C connector into the USB-C port on your computer, monitor, laptop, or docking station.
2. Rotate the dial at the front of the webcam to open/close the privacy shutter.
3. Adjust the webcam by turning side to side and tilting up and down to find the best framing for your video meetings.-
STEP 6: SUCCESSFUL CONNECTION
LED activity light will light up when the webcam is in use by any video application.
LED activity lights:
-
STEP 7: SHOW MODE
Easily show physical items in video calls by tilting the camera down to present sketches, objects, and work in progress. There are two ways to use Show Mode:
1. If mount is secured with micro-suction pad: Using one hand, tilt the camera down to show your desktop, and tilt back up to show yourself.
2. If mount is not secured with micro-suction pad: Hold the mount still with one hand and tilt the camera up or down with the other. Note:
The Show Mode feature requires users to download and use Logi Tune.
-
STEP 8: LOGI SOFTWARE
Get your image right with Logi software. Adjust color and brightness, show your desk and more. www.logitech.com/mxbriosw -
STEP 9: (OPTIONAL) ATTACH TO A TRIPOD
For placement on a tripod (not included)
1. Remove the detachable universal mounting clip from the webcam.
2. Locate the ¼ inch tripod thread on the bottom of the webcam.
3. Secure the webcam on your tripod by twisting it into the ¼ inch thread.
4. Repeat the monitor placement setup steps to best deploy your webcam.
5. Please refer to step 5 and 6 to complete your webcam setup.DIMENSIONS
- WEBCAM:
- Height x Width x Depth: 1.7 in (43.6 mm) x 3.9 in (98 mm) x 1.4 in (36.2 mm)
- Height x Width x Depth: 2.4 in (61.6 mm) x 3.9 in (98 mm) x 2.1 in (52.2 mm), incl. mount clip
- Weight: 6.1 oz (174 g), incl. mount clip
- Attached cable length: 5 ft (1.5 m)
- MOUNTING CLIP:
- Height x Width x Depth: 1 in (25 mm) x 1.8 in (45.8 mm) x 2.6 in (65.1 mm)
- Weight: 1.4 oz (40 g), incl. removable mount adapter
References
- Buy MX Brio UHD 4K Webcam | Logitech
- MX Brio - Ultra HD 4K Webcam | Logitech
- Logitech Support + Download