BOCCI 28.6 Horizontal Suspended Instructions

: June 4, 2024
: BOCCI

Table of Contents

BOCCI 28.6 Horizontal Suspended
DESCRIPTION
PRODUCT SPECIFICATION
PRODUCT INSTALLATION INSTRUCTIONS
IMPORTANT INSTRUCTION
NEED HELP
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BOCCI 28.6 Horizontal Suspended

DESCRIPTION

The stem cable suspended horizontal system comes in unlacquered brass or black powder coated stem with a 116mm (4.5”) diameter white or black canopy rated for ceiling use. Individual 28 pendants result from a complex glass blowing technique whereby air pressure is intermittently introduced into and then removed from a glass a matrix which is intermittently heated and then rapidly cooled. The result is a distorted spherical shape with a composed collection of imploded inner shapes, one of which acts as a shade for the light source. Standard 28s are made with clear glass exterior spheres and milk white interior lamp holder cavities. 28s are possible with infinite versatility in color compositions, sizes and shapes.

NOTES

Purchase replacement lamps online at www.bocci.com/shop/bulbs
The brass used in our Stem Series is untreated and, as such, will develop a natural patina over time.
To avoid any marking or tarnish on the brass during handling and installation, please use the gloves provided in your shipment.
To maintain your fi xture, please regularly dust with a lint-free cloth.
If further cleaning is required, dampen a lint-free cloth with water only and wipe gently to remove dust or debris.

PRODUCT SPECIFICATION

PENDANTS: six
MOUNTING: deep white canopy 116mm (4.5”) in diameter x 40mm (1.6”) deep
LAMPING: 1.5w LED
CABLE LENGTH 3m (10’) / 6m (20’) / 15m (49’)
STEM LENGTH 1.8m (6’) long stem
MATERIALS: blown glass, electrical components, unlacquered brass or black powder coated brass stem, black or white canopy
WEIGHT: approximately 7.7kg (17lb)
POWER SUPPLIES: Integral

PRODUCT INSTALLATION INSTRUCTIONS

Thread the pendant mounting Plates onto the stem Very carefully uncoil the braided coaxial cable in a spool-like manner Insert your index fingers into opposite Sides of the roll then rotate your fingers around each other to unroll the central cable
Use patience allows the cable to uncoil completely to avoid kinks
Note Bocci recommends wearing thin gloves during installation to protect the stem finish and the glass surface
Determine the overall drop. Feed canal cable Into canopy and set the length Witn set screw
Note: this portion of the installation will be done on the ground. Leave a minimum 160mm (6-1/4′) cable for next step. Using a tool or your hands, pry a small hole in the braided cable to expose the two cables inside. Pull out the insulated cable and the aircraft cable.
Thread the gridlock through the aircraft cable and slide the aircraft cable into the unblock holder located inside the canopy
Push (tighten) the gridlock against the holder so the unblock partially rests In the holder
This aircraft cable provides primary support for the fixture.
Connect the supply to line voltage
- Connect input low voltage Wire to 12V DC output wires
- Connect the black wire to the line Wire and the white wire to the neutral wire.
- Ensure that line voltage it is not active during this part of the installation
Note: As an option. Bocci reoommends mounting supplies remotely in a close aæessble and hidden location for ease of long term mantenanæ Installation to be done by to ensure compliance With the code
The client iS responsible for ensuring fasteners are attached to a robust structural substrate.
Affix mounting plate to surface Witn fasteners provided
Note Gently pull the coax cable to make sure the cable is secured before attaching the canopy to the ceiling
Thread the stem onto the connector that is located at the end of the coax cable Carefully insert provided lamps into sækets
Check that each lamp is working properly as you go along by keeping power to the fixture on
Mark the location for the swag hook screw on the ceiling Ensure that the ceiling at the swag location
Is strong enough to hold 2kg (51bS) before attaching the swag hook With the provided screws Thread the swag hæk onto the mounting
Plate, ensuring all the threads are engaged. Slide the ball end of the aircraft into the slot on the swag hook and sæure with set screw.
Thread the cable gri010Ck onto the aircraft. set to the desired length. and tnm off excEA.s
Apply tension to the grip10Ck and make sure grip10Ck is engaged. Feed the grip my through the cap.
Attach it to the safety IOCk and give it a genital pull to make sure It Sits Inside the safety ICC,
Thread the stem cap onto the opposite end of the stem and pull the aircraft cable up through the Slot that allows test orientation the stem. Any adjustments to the level of the stem must be done at this end.
Thread the cover cap onto the end of the unblock cap to secure the aircraft cable.
Thread vændants onto mounting plates and clean fingerprints from fixture surfaces.

IMPORTANT INSTRUCTION

Remove the pendant that iS closest to the middle of the stem pole, exposing the pendant mounting plate Note: The levelling kit should only be attached once the the system is installed to the desired height.
Mark the location for the swag hook on the ceiling (directly above the pendant you just removed) Ensure that the ceiling at the swag location iS strong enough to hold 2kg (51bS) before installing the swag nook mounting plate With the provided screws Threads the swag hook on to the mounting plate, ensuring all the threads are engaged. Slide the ball end of the aircraft into the slot on tne swag nook and secure with set screw
Form a loop with the end of the aircraft cable around the front of the pendant mounting plate Secure the aircraft cable With the provided crimp (crimping tool not included) Trim the aircraft cable close to the crimp
Note: Make sure the aircraft cable iS straight and tignt before securing it with a crimp.
Thread the pendant back onto the mounting plate. Clean fingerprints from fixture surfaces.
Note Bxci recommends wearing thin gloves during Installation to protect the stem finish and the glass surface.