BOCCI 57.6 Ceiling Mounted Instructions
- June 4, 2024
- BOCCI
Table of Contents
BOCCI 57.6 Ceiling Mounted
DESCRIPTION
The stem ceiling mounted system comes in unlacquered brass or black powder coated stem with a 142mm (5.6”) diameter mounting plate rated for ceiling use. 57 is an exploration of a technique used for producing closed cell foam. The process involves trapping voids of air of different sizes and confi gurations within a glass matrix, yielding a shape loosely referencing a rain cloud. These pockets of air remain invisible when the piece is off, but come alive to reveal an interior universe when the piece is illuminated. By virtue of the fabrication process, each piece is completely unique.
NOTES
- Purchase replacement lamps online at www.bocci.com/shop/bulbs
- Power supply can be remote mounted with 94mm (3.7”) x 6mm (0.24”) canopy.
- The brass used in our Stem Series is untreated and, as such, will develop a natural patina over time. To avoid any marking or tarnish on the brass during handling and installation, please use the gloves provided in your shipment.
- To maintain your fi xture, please regularly dust with a lint-free cloth. If further cleaning is required, dampen a lint-free cloth with water only and wipe gently to remove dust or debris
-
Thread the cover cap on one end of the stem.
Note:
Bocci recommends wearing thin gloves during installation to protect the stem fi nish and the glass surface.
-
Connect the stem pieces by threading the stem connector to the stems.
Note:
This step is only necessary for overall stem lengths longer than 1.8m (6’) -
Thread the pendant mounting plate onto the stem. Carefully insert provided lamp into socket.
-
Connect power supply to line voltage. Connect input low voltage wire to 12V DC output wires by feeding the wires through the slots on the mounting plate. Connect the black wire to line wire and white wire to neutral wire. Ensure that line voltage is not active during this part of the installation!
Note:
As an option, Bocci recommends mounting power supplies remotely in a close, accessible and hidden location for ease of long term maintenance. Installation to be done by certifi ed personnel to ensure compliance with the code. -
The client is responsible to ensure fasteners are attached to a robust structural substrate. Affi x mounting plate to surface with fasteners provided. Thread canopy cover onto the mounting plate. Thread on the stem to canopy. Turn power to fi xture on.
-
Gently thread pendant onto the stem. Be sure to carefully place the pendant so as not to damage the lamp during installation.. Clean fi ngerprints from fi xture surfaces
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>