hysencontrol HY368 Zigbee WIFI Radiator Actuator User Manual

Zigbee WIFI Radiator Actuator User Manual

HY368 Zigbee WIFI Radiator Actuator

Many thanks for your selection of our products and services, and also for your trust and support to us.

Download “Smart life” or “Smart RM” App from Google play and App
store| 1. After the ZigBee gateway is configured, enter the gateway to add sub-devices, and wait for the actuator to be powered on and the system self- check is completed.
2.long press enter to setting surface ,short press icon ,short press to choose to enter network connected mode, then long press , flashing access network connected mode. Please refer to the gateway manual for Zigbee gateway configuration.
---|---

Product Specifications
Power: 2 AAalkalinebatteries
Displayaccuracy:：0.5℃
Probesensor:：NTC(10k)1%
Maximumroute：4.5mm
Working temperature: 0-50℃
Running program: Set per 1 week as acycle
Size(mm)：5389.5mm
Range of temperature display:：1~70°C
Default range oftemperatureadjustment：5~35°C Maximum current：90mA
Workingenvironmenttemperature:：-10~60°C Threadsize：M30*1.5
Displays & Buttons

No.| Icon|
---|---|---
A| Auto Mode; Holiday mode; Boost mode; OpenWindow function|
B| Low battery; Children lock;
Zigbee connection status Auto mode period Set temperature/Advanced options Valve status
C| Time setting interface: hour setting; minute setting
No| keys| Represen
---|---|---
D| | 1.Short press to switch manual mode and auto mode
2.Long press to enter advanced settings
3.Confirm key
E| | 1.Decrease key
2.Long press 3s to lock/unlock keys
F| | 1.Increase Key
2.Long press 3 seconds to start the BOOST function: turn on the BOOST fast heating mode, short press any key during operation to exit this function and return to the previous working mode

Installation and initial commissioning
After power on, the screen will show all for 3 seconds.

Time setting: when flashing,thenpress  display valueadjust value,press again,press again to set week,press Increase Key Long press 3 seconds to start the BOOST function: turn on the BOOST fast heating mode, short press any key during operation to exit this function and return to the previous working mode Installation and initial commissioning ,display enter hour setting,press or enter minute setting,press to adjust value,press or or to to adjust to confirm setting and remember time.
Note: after the actuator completes its self-check,under normal working status,if need to modify time, long press 3s access to advanced setting. And press entertime setting. the same as above method. When display “Ad”, press to choose , short press Start system self-check, when display “1”, this is the first step of system self-check.
When Display “2”, this is the second step for self-check, after finish self- check, If there is no fault prompt, it will enter the normal working state. If there is a fault prompt, please handle the fault first, otherwise it will not enter the normal working state.

Special Function description

Holiday mode| press 3s access to advanced settings,shortpress to choose holiday mode,then shortpress enter temperature setting, again short press setting day ssetting,press or to adjust value. Under holiday mode, short press to exit holiday mode
---|---
Open| 1. The actuator turns off the window opening function by default, if you need to
Window Function| use it, you can turn it on in the advanced option 2 setting [reset disable when changing the battery]

Auto mode setting
Long press about 3s accesst o advanced settings, short press ,short press access to auto mode setting, short press switch to auto mode setting to choose which item you want, First set the auto mode to 5means:5=5+2days,6= 6+1 days, 7 = 7 days, afterpress to access to hour or minute setting, short press access to temperature setting. Press or to adjust value. short press choose: hour,minute, time period, and press 10 seconds will automatic save and exist.

Advanced options
Press about3-5 sto access to advanced settings, short press until flashing, press to access to advanced options, press or to adjust value,after finish setting every time, short press to setn ext option,after finishing all ,don’t operate, after 10s it will automatically save and exit.

No| Item| Setting parameters|

default

---|---|---|---
1| Measuring temperature correction| -9-+9°C(Displayed as the corrected room temperature value)| -1°C
2| Open window function parameter: temperature and running time| 1:display means disable open window function,press+ key display 5°C means this function enable(temperature setting range: 5-25°C)
2:Running time:5-60min(after enable function, press change setting)|
3| Automatic lock if no operation more than 10 minutes| 0:Disable 1: Enable| 0
4| Setting temperature minimum limit| 1-15°C| 5°C
5| Setting temperature maximum limit| 16-70°C| 35°C
6| BOOST mode running time| 100s-900s, Steps of 100 seconds| 300Seconds
7| View valve open status| 0-99 99 mean valve open 100% 5 mean valve open 5%|
8| Start/stop working temperature difference setting| 0.5-1.5| 1
9| Display mode| 0:Upward display 1:Downward display| 0
A| Control type of valve| 0: PID      1:FLOAT      2:0N/OFF|
B| Reset| Display88, using+ ormtochange to 00, press to reset, The screen will be fully displayed for 2 seconds.|
C| Valve Seal Type| 0:Soft Seal 1:Hard Seal|
D| Descaling function| 0: Disable descaling function 1: Enable descaling function| 1

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>