HOOVER HP730ALG 011 48033779 Vacuum Cleaner User Manual

HOOVER HP730ALG 011 48033779 Vacuum Cleaner

INSTRUCTIONS FOR SAFE USE

• This appliance should only be used for domestic cleaning, as described in this user guide. Please ensure that this guide is fully understood before operating the appliance.
• Do not leave the appliance plugged in. Always switch off and remove the plug from the socket after use, or before cleaning the appliance or any maintenance task.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge
• if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• If the power cord is damaged stop using the appliance immediately. To avoid a safety hazard, an authorised HOOVER service engineer must replace the power cord. Keep hands, feet, loose clothing and hair away from rotating brushes.
• Use only attachments, consumables or spares recommended or supplied by HOOVER.
• Static electricity: Some carpets can cause a small build up of static electricity. Any static discharge is not hazardous to health. Do not use your appliance out of doors or on any wet surface or for wet pick up.
• Do not pick up hard or sharp objects, matches, hot ashes, cigarette ends or other similar items.
• Do not spray with or pick up flammable liquids, cleaning fluids, aerosols or their vapours.
• Do not run over the power cord when using your appliance or remove the plug by pulling on the power cord.
• Do not continue to use your appliance if it appears faulty.
• Do not stand on or wrap the cord around arms or legs when using your appliance.
• Do not use the appliance to clean animals or people.
• Do not position the appliance above you when cleaning the stairs.
• Keep batteries away from children.
• If a battery is swallowed, immediately consult a doctor. Exhausted batteries are to be removed from the appliance and safely disposed of.
• If the appliance is to be stored unused for a long period, the batteries should be removed and stored safely.
• If the appliance is to be disposed of the batteries must first be removed.
• The appliance must be disconnected from the supply mains when removing the battery.
• Dispose of the batteries safely.
• Use only battery type Lithium CR2032 3V. Non-rechargeable type.
• Batteries are to be inserted with the correct polarity: The positive pole “+” is on the top side. [21]
• Non-rechargeable batteries are not to be recharged.
• The battery terminals are not to be short-circuited.
• HOOVER service: To ensure the continued safe and efficient operation of this appliance we recommend that any servicing or repairs are only carried out by an authorised HOOVER service engineer.

The Environment
The symbol on this appliance indicates that this appliance may not be treated as household waste. Instead it must be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environmental regulations for waste disposal. For more detailed information about treatment, recovery and recycling of this appliance, please contact your local city office, your household and waste disposal service or the shop where you purchased the appliance.

• Frequency bands: 300Mhz ~ 450Mhz
• Maximum RF power transmitted in the frequency band: 11 dBm

Hereby, Candy Hoover Group Srl declares that the radio equipment is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.candy- group.com
CANDY HOOVER GROUP S.r.l. Via Privata Eden Fumagalli, 20861 Brugherio (MB) Italy

GETTING TO KNOW YOUR CLEANER

• A. On / Off Power Control Button

• B. Cord Reel Button

• C. Parking Slot

• D. Cleaner Main Body

• E. Dust Bin Assembly

• F. Dust Bin Lid Opening Latch

• G. Dust Bin Release Handle

• H. Dust Bin Lid

• I. Separation System with integrated Shroud Cleaning System

• J. Dust Bin

• K. Dust Bin flap Release Button

• L. Hose

• M. Hi-Controller Remote Control Handle with Soft Grip:

  • Ma. Variable Power Control Buttons Mb. Silent Power Button
  • Mc. On/Off Button
  • Md. Led Battery Indicator of Handle’s Remote Control

• N. Pre-motor Filter

• O. Exhaust Filter

• P. Integrated Accessories onto the handle: Built-in Crevice Tool, Dusting Brush and Furniture Tool

• Q. Telescopic Tube Secure Connection

• R. Telescopic Tube Adjuster

• S. Telescopic Tube

• T. Carpet and Floor Nozzle** (GP) Ta. Carpet and Floor Nozzle Secure Connection

  • Tb. Floor Type Selector Pedal
  • Tc. Nozzle Suction Regulator

• U. Advanced Furniture Nozzle*

• V. Long 2in1 Tool*

• W. Mini Turbo Dual Action Pet
  Hair Remover Nozzle*

• X. Mini Turbo Dual Action Allergen Remover Nozzle*

• Y. Parquet Extra Care Nozzle*

ASSEMBLING YOUR CLEANER

Remove all components from the packaging.

1. Connect the hose to the cleaner main body, ensuring it clips and locks into position. To release: simply press the buttons on the hose end and pull. [1]
2. Connect the hose handle to the end of the extension tube upper, or accessories* if required. [2]
3. Connect the extension tube lower to the carpet and floor nozzle*, [3] or accessories if required.

USING YOUR CLEANER

1. Extract power cord and plug it into the power supply. Do not pull the cord beyond the red marker. [6]
2. Adjust the length of the telescopic tube by moving the telescopic tube adjuster up and raise or lower the hose handle to the most comfortable cleaning position. [5]
3. Carpet & Floor Nozzle. Press the pedal on the nozzle [7] to select the ideal cleaning mode for the floor type.
   Hard Floor: The brushes are lowered to protect the floor.
   Carpet:** With lifted brushes for the deepest clean.

Carpet & Floor Nozzle: [4]
Hard floor Cleaning: Press the floor type selector pedal on the nozzle on Hard Floor mode and adjust the nozzle suction regulator to open [4a] or close [4b] position for the most comfortable cleaning position. In this position brushes are lowered to protect hard floors.
Carpet Cleaning:** Press the floor type selector pedal on the nozzle on Carpet mode and adjust the nozzle suction regulator to open position. In this position brushes are raised for a deeper cleaning of your carpet. [4c] It’s suggested to open the nozzle suction regulator on carpet to allow a better sliding.

4. Switch the cleaner on by pressing the On/Off button on the cleaner main body [8] or pressing the On/Off button on the hose handle. [9]
5. Variable Power Control – Adjust the power level by pressing the variable power control buttons on the hose handle. [9]

Hi-Controller Handle Settings: [9, M]
Turn the cleaner on/off: press the on/off button.
Variable power control: press the “+, -” buttons to adjust the power.
Silent Power Mode: press the silent power button to clean thoroughly at a reduced noise level.

Integrated accessories on the handle: [P, M]
Built-in Crevice Tool: The hose handle end can be used as a crevice tool to reach narrow spaces.
Furniture Tool: Press the latches on both sides of the handle and slide downwards to release the furniture tool to clean soft surfaces and textiles (curtains, upholstery). Dusting Brush: Press the latches on both sides of the handle and slide downwards, then push the slider to the end to release the built-in dusting brush. Ideal for hard surfaces (bookshelves, keyboards, skirting boards).

6. Switch off at the end of use by pressing the On/Off Button on the cleaner main body or On/Off Button on the hose handle. Unplug and rewind the power cord by pressing the cord reel button.
7. Parking and storage – The tube can be parked for temporary storage while in use, or in the storage position when not in use. [11]

ACCESSORIES

• To obtain the best performance and efficiency it is recommended that the correct nozzles are used for the main cleaning operations.
• These nozzles are indicated in the diagrams by the letters GP, HF or CA.
• A nozzle type GP can be used to clean both carpet and hard floor.
• A nozzle type HF is suitable for use only on hard floor.
• A nozzle of type CA is suitable for use only on carpet.
• The other nozzles are accessories for specialist cleaning tasks and are recommended for occasional use only.
• All accessories can be fitted to the end of the handle or the end of the telescopic tube.
• Accessory Set:**
  • Crevice Tool – For corners and hard to reach areas.
  • Furniture Nozzle – For soft furniture and fabrics.
  • Dusting Brush – For bookshelves, frames, keyboards and other delicate areas.
  • *Dual Action Pet Hair Remover Nozzle [W]** – Use the mini turbo nozzle on stairs or for deep cleaning on textile surfaces and other hard to clean areas. Particularly suitable for pet hairs removal.
  • *Dual Action Allergen Remover Nozzle [X]** – Use the mini turbo nozzle on stairs or for deep cleaning on textile surfaces and other hard to clean areas, particularly suitable for allergen removal.
  • *Parquet Extra Care [Y]** – For parquet floors and other delicate floors.
  • *Long 2in1 Tool [V]** – Crevice tool and dusting brush – It allows to clean hard-to-reach areas such as bookshelves and high corners.
  • IMPORTANT: Do not use mini turbo nozzles on rugs with long fringes, animal hides and carpet pile deeper than 15mm. Do not keep the nozzle stationary while brush is rotating.

CLEANER MAINTENANCE

Emptying the Dust Bin
When the dust reaches the max level indicator on the container, empty the dust bin.
IMPORTANT: To maintain optimum performance do not allow the dust exceed the max level indicator.

1. Switch the cleaner off by pressing the On/Off button on the cleaner main body [8] or pressing the On/Off button on the hose handle [9], and unplug the power cable.
2. Lift the dust bin release handle and remove the dust bin assembly from the cleaner. [12]
3. Hold the dust bin with one hand and with the other hand press the dust bin flap release button. [13]
4. Close the dust bin flap and refit the dust bin assembly to the cleaner main body.

Cleaning the washable filters
The cleaner is fitted with a blue filter pack. To maintain optimum cleaning performance regularly remove the filters and tap against the side of the bin to release dust. The filters should be washed every 5 bin empties or when the filter has excessive dust level.

IMPORTANT: All bagless cleaners require regular filter cleaning. Failure to clean your filters may result in air blockage, overheating and product failure. This may invalidate your guarantee.
IMPORTANT: Regularly check and maintain the filters.
IMPORTANT: Always ensure the filter pack is fully dry before use.

To access the pre-motor filter

1. Lift the dust bin release handle and remove the dust bin assembly from the cleaner. [12]
2. Hold the dust bin with one hand and with the other hand lift the dust bin lid opening latch to open the bin lid. [14]
3. Remove the pre-motor filter located in the bin lid. [16]
4. Gently tap and wash the pre-motor filter. Do not use hot water or detergents. Remove excess water from the filter and leave to dry fully before re-using. [19, 20]
5. Reassemble the pre-motor filter to the dust bin lid once fully dry and refit to the cleaner.

To access the exhaust filter

1. Unclip the exhaust filter cover from the rear of the cleaner main body. [17]
2. Remove the exhaust filter from the rear of the cleaner. [18]
3. Gently tap and wash the filter using warm water. Do not use hot water or detergents. Remove excess water from the filter and leave to dry fully before re-using. [19, 20]
4. Refit the exhaust filter to the rear of the cleaner once fully dry and refit the exhaust filter cover.

IMPORTANT: Do not use the product without the filter pack fitted.

Cleaning the dust bin / separation unit
This cleaner uses a separation system and shroud cleaning system unique to Hoover. If necessary the separation unit can be disassembled from the dust bin and cleaned.

1. Lift the dust bin release handle and remove the dust bin assembly from the cleaner. [12]
2. Hold the dust bin with one hand and with the other hand lift the dust bin lid opening latch to open the dust bin lid. [14]
3. Remove the separation system (including the integrated shroud cleaning system) from the dust bin. [15]
4. If necessary, use a cloth to remove excessive dust from the separation system (including the integrated shroud cleaning system).
5. Place the dust bin under tap water. Rinse with lukewarm water. Wash internal surfaces of the dust bin with water only. DO NOT use soap detergents to wash the internals of the dust bin.
6. Reassemble the internal component to the dust bin, ensuring all components are dry.
7. Close over the dust bin lid and refit dust bin assembly to cleaner.

Removing a blockage

1. Check if the dust bin is full. If so refer to ‘Emptying the dust bin’.
2. If the dust bin is empty but suction is still low:
   • Do the filters need cleaning? If so refer to ‘Cleaning the washable filters’.
   • Check if there is any other blockage in the system – Use a rod or pole to remove anyblockage from the extension tube or flexible hose.
   • Check if pre-motor filter is fitted.
   • Check if the separation unit needs to be cleaned. Refer to ‘Cleaning the separation unit’.

USER CHECKLIST

Should you have a problem with the product, complete this simple user checklist before calling your local Hoover service.

• Is there a working electricity supply to the cleaner? Please check with another electrical appliance.
• Is the dust container over-filled? Please refer to ‘Cleaner Maintenance’.
• Is the Filter blocked? Please refer to ‘Cleaning the filter’.
• Is the hose or nozzle blocked? Please refer to ‘Removing a blockage from the system’.
• Has the cleaner overheated? If so, it will take approximately 30 minutes to automatically reset.

IMPORTANT INFORMATION

• Hoover spares and Consumables
  Always replace parts with genuine Hoover spares. These are available from your local Hoover dealer or direct from Hoover. When ordering parts always quote your model number.

• Hoover Service
  Should you require service at any time, please contact your local Hoover Service Office.

• Quality
  BSI ISO 9001
  Hoover’s factories have been independently assessed for quality. Our products are made using a quality system which meets the requirements of ISO 9001.

• Your Guarantee
  The guarantee conditions for this appliance are as defined by our representative in the country in which it is sold. Details regarding these conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.
  Subject to change without notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>