fun generation 500 CO2 RGB Fog Machine User Manual

: May 15, 2024
: fun generation

Table of Contents

General information
Safety instructions
Features
Installation
Connections and controls
Operating
Technical specifications
Troubleshooting
Cleaning
Protecting the environment
Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

fun generation 500 CO2 RGB Fog Machine

General information

This document contains important instructions for the safe operation of the product. Read and follow the safety instructions and all other instructions. Keep the document for future refer‐ence. Make sure that it is available to all those using the product. If you sell the product to another user, be sure that they also receive this document.

Our products and documentation are subject to a process of continuous development. They are therefore subject to change. Please refer to the latest version of the documentation, which is ready for download under www.thomann.de.

Symbols and signal words

In this section you will find an overview of the meaning of symbols and signal words that are used in this document.

Signal word	Meaning
DANGER!	This combination of symbol and signal word indicates an

immediate dangerous situation that will result in death or serious injury if it is not avoided.
WARNING!| This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in death or serious injury if it is not avoided.
CAUTION!| This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in minor injury if it is not avoided.
NOTICE!| This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in material and environmental damage if it is not avoided.
Warning signs| Type of danger
---|---

| Warning – high-voltage.

| Warning – flammable substances.

Warning signs	Type of danger

| Warning – hot surface.

| Warning – dangerous optical radiation.

| Warning – slip hazard.

| Warning – harmful or irritating substances.
| Warning – danger zone.

Safety instructions

Intended use

This device is intended for generating artificial fog by evaporating the fog fluid with which it is filled, with an additional electronic lighting effect by means of LED technology. The device is designed for professional use and is not suitable for use in households. Use the device only as described in this user manual. Any other use or use under other operating conditions is consid‐ered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.

This device may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety.

Extend the life of the device by regular breaks in operation and avoid switching it on and off frequently. This device is not suitable for continuous use.

Safety

DANGER!
Risk of injury and choking hazard for children!
Children can suffocate on packaging material and small parts. Children can injure themselves when handling the device. Never allow children to play with the packaging material and the device. Always store packaging material out of the reach of babies and small children. Always dispose of packaging material properly when it is not in use. Never allow children to use the device without supervi‐sion. Keep small parts away from children and make sure that the device does not shed any small parts (such knobs) that children could play with.

DANGER!
Danger to life due to electric current!
Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside. Do not use the device when covers, safety equipment or optical components are missing or damaged.

DANGER!
Danger to life due to electric current!
A short circuit could lead to a fire hazard and risk of death. Always use proper ready-made insulated triple-core mains cable with a safety plug. Do not modify the mains cable or the plug. In case of isolation damage, disconnect immediately the power supply and arrange repair. If in doubt, seek advice from a qualified electrician.

WARNING!
Risk of burns from flammable liquids!
The use of flammable liquids in the device may cause severe burns and damage to property. Use only approved fog fluids. Never fill flammable liquids into the tank of the device.

WARNING!
Risk of burns on the hot fog nozzle!
The fog generated on the fog nozzle is hot. Occasionally hot fluid drops may escape from the nozzle. The fog nozzle may be hot for several hours after switching off the device. Skin contact with hot fog and drops of hot liquid can lead to burns. Ensure a minimum distance of 50 cm to persons and objects during operation. Do not touch the fog nozzle during and immediately after operation.
Before touching the device, always ensure that all surfaces have cooled down sufficiently.
WARNING!
Slip hazard due to condensate pools!
The fog generated by the fog machine can condense on floors and surfaces. People can slip and injure themselves on pools of con‐ densate. Do not direct the fog to floors or other surfaces that may be stepped on.
Regularly check all floors and other surfaces that can be accessed for slipping hazards. If necessary, remove any pools of condensate.

WARNING!
Health hazard when handling fog fluid!
Fog fluid contains glycols. There is a health risk in case of eye contact and if fluid is swallowed. Keep fog fluid in a safe place and out of the reach of children. Never ingest fog fluid and avoid contact with eyes. In case of accidental ingestion of or eye contact with fog fluid: Do not induce vomiting if swallowed. Thoroughly rinse the eyes with water upon contact. Get immediate medical attention.

WARNING!
Risk of eye damage caused by high light intensity!
The device generates highly intense light radiation. Looking directly into the light source can damage the eyes. Never look directly into the light source.

WARNING!
Risk of epileptic fit due to flashing lights!
The device emits flashing lights (strobe effects). Flashing lights can trigger epileptic fits in specific people. If you are at risk of epi‐ lepsy, avoid spending longer periods of time subjected to flashing lights and looking into strobing light.

CAUTION!
Possible respiratory problems due to fog fluid!
Fog fluid can lead to respiratory problems in case of prolonged exposure and in certain people. Using unsuitable fluids can generate toxic gases. Do not use any fog fluids other than the ones approved for the device. Any claims for compensation for damages caused by using non-approved fluids are excluded. Do not let the device produce fog in poorly ventilated areas. Do not expose people with health problems (e.g. allergy-related respiratory symptoms, asthma) to artificial fog.

NOTICE!
Risk of fire due to covered vents and neighbouring heat sources!
If the vents of the device are covered or the device is operated in the immediate vicinity of other heat sources, the device can over‐heat and burst into flames. Never cover the device or the vents. Do not install the device in the immediate vicinity of other heat sources. Never operate the device in the immediate vicinity of naked flames.

NOTICE!
Damage to the device if operated in unsuitable ambient conditions!
The device can be damaged if it is operated in unsuitable ambient conditions. Only operate the device indoors within the ambient conditions specified in the “Technical specifications” chapter of this user manual.
Avoid operating it in environments with direct sunlight, heavy dirt and strong vibrations. Avoid operating it in environments with strong temperature fluctuations. If temperature fluc‐ tuations cannot be avoided (for example after transport in low outside temperatures), do not switch on the device immediately.
Never subject the device to liquids or moisture. Never move the device to another location while it is in operation. In environments with increased dirt levels (for example due to dust, smoke, nicotine or mist): Have the device cleaned by qualified specialists at regular intervals to prevent damage due to overheating and other malfunctions.

NOTICE!
Damage to the device due to high voltages!
The device can be damaged if it is operated with the incorrect voltage or if high voltage peaks occur. In the worst case, excess vol‐ tages can also cause a risk of injury and fires. Make sure that the voltage specification on the device matches the local power grid before plugging in the device. Only operate the device from professionally installed mains sockets that are protected by a residual current circuit breaker (FI). As a precaution, disconnect the device from the power grid when storms are approaching or it the device will not be used for a longer period.

NOTICE!
Risk of fire due to installation of a wrong fuse!
Using fuses of a different type than compatible with the device may cause a fire and seriously damage the device. Only use fuses of the same type. Observe the labelling on the device casing and the information in the “Technical data” chapter.

General information about how to safely operate fog machines and hazers

The device was designed for use in professional event technology and works reliably when used properly. Observe the following information:

Follow all warnings in these operating instructions.
Never leave the device running without supervision.
The device is not suitable for use in private households or as a child’s toy.
Place the device on a stable, fire-proof basis that is at least twice as large as the device.
Maintain a safety distance of 1 m to flammable materials.
The device is not intended for suspended assembly (the so-called “flying operation”).
During operation, ensure that the visibility in the room does not fall below 2 m so that everyone in the room can still orient themselves safely.
The fog or haze generated by the device may trigger smoke alarms.

Features

This vertical fog machine with LED effect ring is suitable for use in clubs, bars, night clubs and on stages. The built-in LEDs are mounted around the fog outlet and enlighten the fog column in bold colours.

Special features of the device:

Vertical fog column of approx. 3 m height
Coloured fog effects by built-in RGB LEDs
Manual control via wired remote control with direct control of 8 colour combinations
Flash button on the device for switchable strobe effect
Suitable fog fluids: Fast fog for CO2 effect (item no. 209054), E-M fluid (item no. 121307), E fluid (item no. 105454)

Unsuitable fluids can damage the device. Only use the device with original Stairville fluids.

For technological reasons, the light output of LEDs decreases over their lifetime. This effect increases with higher operating temperature. You can extend the service life of the illuminants by providing adequate ventilation and operating the LEDs with the lowest possible brightness.

Installation

Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.

The device is designed for horizontal or vertical installation on the floor or even surfaces. Place the unit on a flat and stable, non-combustible surface. The device requires 50 cm clearance at the sides and above.

Connections and controls

Rear panel

Rear Panel

[POWER] | Rubber panel plug for the power supply with fuse holder
Carrying handle
[ON | OFF] | Main switch. Turns the device on and off.
[STROBE] | Turns the strobe effect on and off.
[HEATING]/[READY] | Indicator LED for heating up process and operating status
Fog fluid container with screw-cap
LED effect ring and fog nozzle for fog output
Fill level indicator
[REMOTE CONTROL] | Connection for the wired remote control
Wired remote control
[READY]/[ON] | Indicator LEDs
[READY] lights up: The device is fully heated and ready for use.
[ON] lights up: The trigger button on the remote is activated.
[1] … [8] | Activates a colour combination and simultaneously triggers a fog blast.
[1] | Red
[2] | Green
[3] | Blue
[4] | Yellow
[5] | Purple
[6] | Cobalt blue
[7] | White
[8] | Colours 1 … 7, automatic colour sequence

Operating

Filling the device

NOTICE!
Damage to the device due to the use of unsuitable fog fluids!
Fog fluids not approved by the manufacturer may permanently damage the unit.
Only use the fog fluids listed on www.thomann.de and follow their instructions for use.

First, make sure that the device is disconnected from the mains.

Open the screw cap of the fluid container and fill in the fog fluid. Make sure that no fog fluid is spilled or gets into the device. The easiest way to do so is to use a funnel. The container capacity is 800 ml.

Screw the cap firmly back on.

Switching on the device

NOTICE!
Risk of undetected fires in the absence of supervision!

There is a general risk of fire when operating the device. If the appliance is left unattended, fires can go undetected and cause great damage.

Never operate the device unattended.

Connect the device to the mains power grid and turn it on with the main switch. During the heat-up time of about 3 minutes the [HEATING] indicator LED lights up. The device is ready for use as soon as the [HEATING] indicator LED goes out and the [READY] indicator LED lights up.

Operation

Operation with an empty fluid container can lead to overheating and permanent damage of the pump. When operating, always ensure that there is sufficient fog fluid in the liquid container to avoid no-load running.

Triggering fog blast and LED effect

Connect the remote control to the [REMOTE CONTROL] connection socket on the control panel of the device. Press the button for the required colour of the LED effect ring to trigger a fog blast in conjunction with the required colour. The output duration is approx. 6 s. To stop fog output earlier, press any button on the remote control.

Adding the strobe effect

Press the [STROBE] button on the back of the device. The strobe effect on the LED effect ring is now switched on. To deactivate the strobe effect, press [STROBE] again on the back of the device.

Decommissioning the device

Switch off the device using the main switch. Do not transport the device before it has cooled down completely. To avoid leaking fog fluid during transport, you should transport the device only with an empty fluid container.

Technical specifications

Heater power	550 W
Warm-up time	approx. 3 min
Fluid container capacity	800 ml
Fluid consumption	27 ml/min
Fog blast duration, max.	approx. 9 s
Charging time between fog blasts	approx. 43 s
Fog blast reach	3 m
Input connections	Power supply
Wired remote control	DIN panel socket, 5-pin
Light source	3 × 3in1 RGB LED, 9 W
Power consumption	560 W
Supply voltage	230 V 50 Hz
Fuse	5 mm × 20 mm, 5 A, 250 V, fast blow
International Protection Rating	IP20
Dimensions (W × H × D)	290 mm × 250 mm × 150 mm
Weight	3.3 kg
---	---
Ambient conditions	Temperature range
Relative humidity	20%…80% (non-condensing)

Further information

Approved fog fluids	Stairville Fast Fog Fluid (item no. 209054)

Troubleshooting

In the following we list a few common problems that may occur during operation. We give you some suggestions for easy troubleshooting:

Symptom	Remedy
The unit does not work, no fog blast	1. Check the mains connection and main

fuse.
2. Check that the fog fluid and / or water tank is sufficiently filled.
3. Check the hose connections of the fog fluid and the water tank.
No response to the wired remote control| Check if the remote control is connected correctly.

If the procedures recommended above do not succeed, please contact our Service Center. You can find the contact information at www.thomann.de.

Cleaning

NOTICE!
Possible damages caused by unsuitable cleaning agents

Cleaners not approved by the manufacturer may permanently damage the unit.

Only use the fog machine cleaners listed on www.thomann.de and follow their instructions for use.

Clean the appliance after every 30 operating hours, or if it was not in use for a longer period of time.

Procedure

Make sure that the device is turned off, disconnected from the mains and completely cooled down.
Position the unit in a well ventilated place.
Insert the suction hose of the fog machine into the bottle with the fog machine cleaner.
Connect the device to the mains power grid and turn it on with the main switch.
Wait until the unit has reached the required operating temperature.
Change to continuous operation and let the device produce fog for about 20 seconds.
Insert the suction hose of the fog machine back into the fog fluid container and let the device again produce fog for about 20 seconds. This will rinse the lines.
- The cleaning is completed.

Fan grids

The fan grids of the device must be cleaned of any contamination, such as dust, etc. on a regular basis. Before cleaning, switch off the device and disconnect mains-operated devices from the mains. Only use pH-neutral, solvent-free and non-abrasive cleaning agents. Clean the unit with a slightly damp lint-free cloth.

Protecting the environment

Disposal of the packing material

Environmentally friendly materials have been chosen for the packaging. These materials can be sent for normal recycling. Ensure that plastic bags, packaging, etc. are disposed of in the proper manner.

Do not dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the instructions and markings on the packaging.

Observe the disposal note regarding documentation in France.

Disposal of your old device

This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) as amended.

Do not dispose of your old device with your normal household waste; instead, deliver it for controlled disposal by an approved waste disposal firm or through your local waste facility.
When disposing of the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste management facility. Proper disposal protects the environment as well as the health of your fellow human beings.

Also note that waste avoidance is a valuable contribution to environmental protection.
Repairing a device or passing it on to another user is an ecologically valuable alternative to disposal.

You can return your old device to Thomann GmbH at no charge. Check the current conditions on www.thomann.de.

If your old device contains personal data, delete those data before disposing of it.