fun generation 437439 Universal Stand Extension User Guide

June 15, 2024
fun generation

fun generation 437439 Universal Stand Extension User Guide
fun generation 437439 Universal Stand Extension

This document contains important information on the safe use of the product.
Read and follow the safety instructions and all other instructions. Keep the document for future reference. If you pass the product on to others, please include this document. Contents are subject to change. Please refer to the latest version of the documentation, which is available for download at www.thomann.de.

Safety instructions

Intended use
This product serves as a multifunctional base for positioning various devices and objects. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damage resulting from improper use. This device may be used only by persons with sufficient physical, sensory, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety

Warning Icon Risk of injury and choking hazard for children!
Children can suffocate on packaging material and small parts. Children can injure themselves when handling the product. Never allow children to play with the packaging material and the product. Always store packaging material out of the reach of babies and small children. Always dispose of packaging material properly when it is not in use.
Never allow children to use the product without supervision. Keep small parts away from children and make sure that the product does not shed any small parts that children could play with.

Warning Icon Risk of injury due to tipping of the stand during transport under load!
If the stand is moved without removing the loaded equipment, the stand may tip over and cause injuries and property damage. Always remove equipment from the stand before moving the stand.

Warning Icon Risk of injury due to tipping of stand on unsuitable ground!
If the stand is placed on soft or uneven ground, it may tip over and cause injuries and property damage. Always place the stand on flat and solid ground.

Warning Icon Risk of injury due to tipping, excessive loading and improper use!
In case of excessive and uneven loading, the product might tip over, causing injury and property damage. The product cannot hold people. Never sit on the product. Never exceed the specified maximum load for the product.

Possible staining due to plasticiser in rubber feet!
The Plasticine contained in the rubber feet of this product may react with the coating of the floor and cause permanent dark stains after some time. If necessary, use a suitable mat or felt slide to prevent direct contact between the device’s rubber feet and the floor.

Operating location

Do not ever use this product:

  • in conditions of extreme temperature or humidity
  • in extremely dusty or dirty places
  • in locations where the device may get wet

General handling

  • To prevent damage, never exert force when handling the product.
  • Never immerse the device in water. Wipe only with a clean and dry cloth. Do not use liquid cleaners such as benzene, thinners or flammable cleaning agents.

Features

  • Universal stand
  • Can also be used as a stand for devices
  • Width can be adjusted between 720 mm and 1,007 mm
  • Height can be adjusted between 670 and 910 mm
  • Suitable universal extension: Item no. 437439 (not included in the scope of delivery)
  • Colour: black

Setup

  1. The frame is delivered with its legs folded in.
    Assembly Instruction

  2. Place the stand on its side, unfold the legs, and place the frame on its feet.
    Assembly Instruction

  3. Now push the two fold-in locks towards the inside of the frame. Caution! Danger of crushing!
    Assembly Instruction

  4. To widen the support surface, you can loosen the four indicated hand screws and pull out the right and left part of the frame to the required width. Then tighten the hand screws firmly again.
    Assembly Instruction

  5. To extend the height of the frame, you can release the screw locks on the four frame legs by turning them anti-clockwise, pull them slightly away from the left, and then pull the extensions out of the legs as far as required.
    Let the locking mechanisms engage and tighten them again.

  6. Optionally available accessories such as the Fun Generation Universal Stand Extension (item no. 437439) can be mounted on the two attachment points.
    Assembly Instruction

  7. The frame is disassembled in reverse order.

Technical specifications

  • Dimensions, packaged (W × H ×D): 860 mm × 460 mm × 665 mm
  • Dimensions, assembled (W × H ×D): 1,275 mm × 515 mm × 910 mm
  • Height: 670 – 910 mm
  • Weight: 7.4 kg
  • Load capacity: 50 kg

Environmentally friendly materials have been chosen for the packaging. These materials can be sent for normal recycling. Ensure that plastic bags, packaging, etc. are disposed of in the proper manner. Do not dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the instructions and markings on the packaging.

Observe the disposal note regarding documentation in France.

Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.deinfo@thomann.de DocID: 414877_437439_25.10.2023

fun generation Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals