Sunnydaze DECOR HB-202 Whirling Petals Wind Spinner User Manual
- May 15, 2024
- Sunnydaze DECOR
Table of Contents
Sunnydaze DECOR HB-202 Whirling Petals Wind Spinner
Specifications
- Product Name: Whirling Petals Wind Spinner
- Model: HB-202
- Manufacturer: Sunnydaze Decor
- Warranty: 1-year warranty period
Product Usage Instructions
Assembly
- Slide 2-Prong Stake (B) over Step-in Stake (A).
- Secure the Center Pole (C) to the step-in stake. Do not over-tighten.
- Secure T-Bar (D) onto the center pole.
- Place two Blades (E) onto the T-bar.
- Secure each blade using Coupling (F). Do not over-tighten.
- Place Spacer (G) onto the blade and secure Nut Cap (H).
Installation
To prevent damage to the blade, remove the assembled top during
installation. Choose a location with firm soil, and push the step-in stakes
into the ground ensuring they are flush. If the blades do not spin freely,
slightly loosen the nuts.
Use & Care **Cleaning
**
Wash components with a mixture of water and vinegar. Rinse thoroughly and dry with a clean cloth.
Important Information
Any modification to the product or failure to follow recommended care will
void the product warranty.
- Purchase Date:
- Order/Customer Reference Number :
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the
quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year
warranty period. Proof of purchase, with the date of purchase as well as
photos of the merchandise defect, must be provided. Photos are used to
determine the cause of defects and for future quality control. Register your
warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments, or concerns, feel free to contact us by
phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com,
or via our Contact Us page at https://tiny.cc/SunnydazeContact
WHIRLING PETALS WIND SPINNER
- Review all assembly and care information before using this product. Save this manual for future reference.
- Assemble components on a soft, clean surface to avoid damaging the finish.
Inspect packaging to ensure all parts are accounted for before disposing of packing materials.Save the packing slip.
Parts
WARNING
CHOKING HAZARD — This item contains small parts that can be swallowed.
Keep children and pets away during assembly.
WARNING: Manufacturer and seller expressly disclaim any liability from personal injury, property damage, or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, or neglect of this product.
ASSEMBLY
- Slide 2-Prong Stake (B) over Step-in Stake (A), as shown.
- Secure the Center Pole (C) to the step-in stake. Do not over-tighten.
- Secure T-Bar (D) onto the center pole.
- Place two Blades (E) onto the T-bar.
- Secure each blade using Coupling (F). Do not over-tighten.
- Place Spacer (G) onto the blade and secure Nut Cap (H).
INSTALLATION
- To prevent damage to the blade, we recommend removing the assembled top during installation. Take care when setting down the assembled top; if the blades are damaged or bent, they may not spin properly.
- Choose a location with soil that is firm enough to support the unit while in use.
- Do not install into loose soil as doing so may cause the unit to lean, tip over, or prevent the blades from spinning correctly.
- Ensuring the unit remains straight, push the step-in stakes into the ground and step on them until they are flush with the top of the ground. If you encounter resistance during installation, do not force the stakes into the ground; pull the stakes out of the ground and check for obstructions such as stones or tree roots.
- If the blades do not spin freely, the nuts may need to be slightly loosened
USE & CARE
- Avoid high-traffic areas such as locations where children and pets play.
- Water may seep into the connection points and cause the treaded components to rust. Periodically check connection points and clean them to prevent rust.
CLEANING
- Wash components using a mixture of 4 parts water to 1 part white distilled vinegar. Scrub with a cloth or a soft-bristled brush.
- Thoroughly rinse with clean water and dry with a clean cloth
IMPORTANT INFORMATION
- Do not install into loose soil as the unit may lean or tip over.
- Do not use harsh chemicals or abrasive materials to clean the unit as they may damage the product and void the product warranty.
- Store this unit during freezing temperatures as exposure to freezing temperatures may damage the product.
- The manufacturer is not liable for damages or defects caused by exposure to weather elements.
Any modification to the product or failure to follow recommended care will void the product warranty.
WARNING: Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, or neglect of this product
FAQ
- Q: What should I do if I encounter resistance during installation?
- A: If you encounter resistance, do not force the stakes into the ground. Pull them out and check for obstructions like stones or roots.
- Q: How should I clean the product?
- A: Use a mixture of water and vinegar to clean the components, then rinse and dry thoroughly.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>