Hotpoint AH12E15D3B Electric Heater Instruction Manual

Table of Contents

Hotpoint-AH12E15D3B-Electric-Heater-product

Installation Instructions

Wall Case Dimensions
- A : Insert dimension A here inches
- C : Insert dimension C here inches
- Maximum Cord Extension : 30 inches
Wall Opening Dimensions
- Add 1/4 to A and C dimensions for all cut-outs.
- RAB80 16-1/4 Min. H x 42-1/4 Min. W

Product Features and Benefits

Include feature and benefit details here.

Product Usage Instructions

Ensure the power supply matches the voltage requirements of the unit.
Install the unit following the provided wall case dimensions and opening dimensions.
Connect the line cord to a compatible power outlet.
Refer to the user manual for specific operating instructions and safety precautions.

FAQ

Q: What should I do if the unit does not heat properly?
- A : Check the power supply, and circuit breaker, and ensure proper installation according to the manual.
Q: Can I use an extension cord with this unit?
- A : It is recommended to connect the unit directly to a power outlet without using an extension cord for safety reasons.

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)

ELECTRICAL WIRING
- All wiring, including installation of receptacles, must be made in accordance with local electrical codes and regulations.
- NOTE : Aluminum wiring may pose special problems – consult a qualified electrician.

GRILLE OPTIONS

ELECTRICAL CONNECTION

230/208-volt units must be plugged into a receptacle. Installation must comply with local electrical codes and regulations.
The power cord is permanently attached on all Hotpoint chassis.

AH12 ELECTRIC HEATER

Hotpoint-AH12E15D3B-Electric-Heater-fig1

WALL CASE DIMENSIONS

RAB80 WALL SLEEVE
- Heavy-gauge galvanized steel, with insulation, for quick self-assembly.
- A – 42”, B – 13-3/4”, C – 16”

MAXIMUM CORD EXTENSION

WALL OPENING DIMENSIONS

14,500 / 14,300 cooling BTU
10.3 / 10.4 PER
R32 Refrigerant – Environmental friendly, low GWP (Global Warming Potential)
3-Speed Fan – Give guests control over their comfort with three fan speeds to choose from
4-Temperature Limiting Options – Easily select one of four temperature ranges for peak efficiency and total customer comfort
Intuitive Display – Allow guests to easily customize their preferred settings and reduce maintenance calls with an easy-to-use control panel
Power Cord (LCDI) Included – Hotpoint PTACs come with everything needed for a quick and easy installation
Automatic Emergency Heat – Keep guests comfortable with a heating option that uses electric resistance heat in heat pump mode
Freeze and Frost Protection – Automatic freeze and indoor frost control keep units operating in peak condition
Auto Power Recovery – In case of power failures, units automatically resume their operation when power is restored, reducing maintenance calls
Self Diagnostics – Quickly and easily identify service needs with a nine-point diagnostic code system
Backed by an Industry Leader – With a long history of creating durable products at an affordable price, Hotpoint is your trusted PTAC brand