VEVOR 4.0XS Cat Exercise Wheel User Manual
- May 15, 2024
- VEVOR
Table of Contents
VEVOR 4.0XS Cat Exercise Wheel User Manual
We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only representsanestimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if youareactually saving half in comparison with the top major brands.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel freetocontact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject totheproduct you received. Please forgive us that we won’t inform you againifthere are any technology or software updates on our product
SPECIFICATIONS
| Model | 4.0 XS |
|---|---|
| Product Size | 750×320×800mm |
| Color | Natural |
| Model | 4.0 M |
| Product Size | 910×320×970mm |
| Color | Natural |
| Model | 4.0 XL |
| Product Size | 1105×345×1170mm |
| Color | Black |
| Model | 4.0 XXL |
| Product Size | 1320×340×1415mm |
| Color | Natural |
COMPONENTS
**A×2: P×2
| B×2
*| C a plank with only one screw hole
C×2
---|---|---
**D×6
*| three pieces of E have double holes on the side.4.0XS /4.0M E×174.0XL/4.0XXL
E×23| **F×1
G×6
| H×1
| K×24
**
4.0XS /4.0M L×584.0XL/4.0XXL
L×70| **N×1
| M×1
*
Components A, C, E, F, P have been pre installed with plastic solenoids.
*Each set comes with a screwdriver, cat teaser, gloves and sandpaper.
Assembly Instructions
Instructions hint:
Do not tighten the mounting screws to the end at one time, and tighten them
again after a single component is installed and formed!
STEP1
Base installation
First snap into one side and fix it with screws, then install the other side
and fix it with screws.
STEP2
STEP3
Here, use E with double holes for installation
**STEP4
**
STEP5
**STEP6
**
**STEP7
**
STEP8
**STEP9
**
**STEP10
**
**STEP11
Place the rollers on the base
**
**STEP12
** Connect the lock plate H with the screw N and fix it on the plate with holes C.
STEP13
Please paste the black buckle as shown in the figure below.
Put black belt back glue mother-in-law Tear off the to player paper, along the
Roller fixed one circle.(Wipe the rollers clean first!)
The Velcro of the accessories is sent out in one piece, which needs to be cut
according to the length of the runway
**STEP14
**
**STEP15
Lock it when not in use.
* H wooden lock disinserted into the card slot and locked.
**
TIPS:
- The number of screws marked above is the actual number used during installation. When the product is shipped, 1~3 more screws of each type will be given as spares.
- During the use of the product, children are prohibited from approaching without the company of adults.
- The edge of the product is a bit sharp, and you need to wear gloves for installation; at the same time, it comes with sandpaper, so you can polish the edge again by yourself; without gloves, be careful when touching the running wheel.
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho
Cucamonga, CA 91730
Pooled as Group Ltd
Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom
Technical Support and E-Warranty Certificate
www.vevor.com/suppor
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>