BRESSER 70099 Thermo Hygro 3CH Sensor Instruction Manual

: May 15, 2024
: BRESSER

Table of Contents

BRESSER 70099 Thermo Hygro 3CH Sensor
Product Information
Product Usage Instructions
FAQ
Introductions
FEATURES OF THE REMOTE UNIT
FIRST OPERATION
TIPS FOR SETTING UP
WARRANTY & SERVICE
TECHNICAL DATA
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BRESSER 70099 Thermo Hygro 3CH Sensor

BRESSER-70099-Thermo-Hygro-3CH-Sensor-PRODUCT

Product Information

Specifications

Model: Thermo-Hygro-3CH-Sensor 433MHz
Art. Nr.: 7009991
Transmission Frequency: 433MHz
Power Supply: 2x AAA 1.5V Batteries (not included)

Product Usage Instructions

Features of the Remote Unit

The remote unit displays temperature, humidity, and the current channel.
It also has an LED indicator that flashes when signals are transmitted.
The unit can be wall-mounted and features a reset button to restore all functions after a channel change.

FAQ

Q: What type of batteries does the unit require?
A: The unit requires 2x AAA 1.5V batteries, not included in the package.
Q: Can I mount the remote unit on a wall?
A: Yes, the remote unit has a wall mount for easy installation.

Introductions

General Warning
DANGER!

This device contains electronic components which operate via a power source (power supply and/or batteries). Do not let children use the device while unattended. Only use the device as described in the manual, otherwise you run the risk of an electric shock.
Children should only use the device under adult supervision.
Keep packaging material, like plastic bags and rubber bands, out of the reach of children, as they pose a choking hazard.
Keep batteries out of the reach of children. Make sure you insert the batteries correctly. Empty or damaged batteries could cause burns if they come into contact with the skin. If necessary, wear adequate gloves for protection.

DANGER!
Do not expose the device to high temperatures. Use only the recommended batteries. Do not short-circuit the device or batteries, or throw them into a fire. Excessive heat or improper handling could trigger a short-circuit, a fire or an explosion!

NOTE!
Do not disassemble the device. In the event of a defect, please contact your dealer. The dealer will contact the Service Centre and can send the device in to be repaired, if necessary.
Use only the recommended batteries. Always replace weak or empty batteries with a new, complete set of batteries at full capacity. Do not use batteries from different brands or with different capacities. The batteries should be removed from the unit if it has not been used for a long time.

NOTES ON CLEANING
Separate the device from the power supply or remove the batteries before cleaning.
NOTE!
Only use a dry cloth to clean the exterior of the device. Do not use any cleaning fluid to avoid damaging the electronics.
SCOPE OF DELIVERY
Outdoor sensor, instruction manual, batteries required (not included): 2 pcs. batteries (1.5V, type AAA)

FEATURES OF THE REMOTE UNIT

BRESSER-70099-Thermo-Hygro-3CH-Sensor-FIG-1

A: DISPLAY (ON FRONT SIDE)
Displays temperature, humidity and current channel.
B: LED INDICATOR (ON FRONT SIDE)
Flashes when signals are transmitted.
C: WALL MOUNT
For mounting the sensor on walls.
D: RESET
Reset all functions after channel change.
E: SET THE TRANSMISSION CHANNEL (1-3)
Input channel for the weather station. Set the channel before inserting the batteries.
F: BATTERY COMPARTMENT
Unit requires 2 pcs. UM-4 or “AAA” 1.5V batteries.

FIRST OPERATION

Open the battery compartment cover.
Set the desired channel with the switch. If you are using only one transmitter, please leave the selection at „1“.
Insert 2 new UM-4 or „AAA“ 1.5V batteries observing correct polarity.
Use a pin to press the „RESET“ – button located in the battery compartment.
Close the battery compartment cover and set the unit in the desired location.

Although the outdoor sensor is weatherproof, it should not be placed in places exposed to direct sunlight, rain or snow.

TIPS FOR SETTING UP

Please follow the instructions below to ensure optimum operation of the equipment:

Assign each external transmitter unit its channel.
Place the receiver unit and transmitter unit within 1 meter of each other and activate the manual search for available signals from all connected outdoor sensors on the main unit (weather station not included with delivery).

DISPOSAL
Dispose of the packaging materials properly, according to their type, such as paper or cardboard. Contact your local waste-disposal service or environmental authority for information on the proper disposal.

Do not dispose of electronic devices in the household garbage! As per the Directive 2002/96/EC of the European Parliament on waste electrical and electronic equipment and its adaptation into German law, used electronic devices must be collected separately and recycled in an environmentally friendly manner.
In accordance with the regulations concerning batteries and rechargeable batteries, disposing of them in the normal household waste is explicitly forbidden. Please make sure to dispose of your used batteries as required by law — at a local collection point or in the retail market. Disposal in domestic waste violates the Battery Directive.
Batteries that contain toxins are marked with a sign and a chemical symbol.

battery contains cadmium
battery contains mercury
battery contains lead

BRESSER-70099-Thermo-Hygro-3CH-Sensor-FIG-5

WARRANTY & SERVICE

The regular warranty period is 2 years and begins on the day of purchase. To benefit from an extended voluntary warranty period as stated on the gift box, registration on our website is required.
You can consult the full warranty terms as well as information on extending the warranty period and details of our services at www.bresser.de/warranty_terms.

CE DECLARATION OF CONFORMITY
Hereby, Bresser GmbH declares that the equipment type with part number: 7009991 complies with Directive: 2014/53/EU. The full text of the CE declaration of conformity is available at the following internet address: www.bresser.de/download/7009991/CE/7009991_CE.pdf.