BORMANN BPA2000 Crane Electric Hoist Weight Owner’s Manual

: May 15, 2024
: BORMANN

Table of Contents

BORMANN BPA2000 Crane Electric Hoist Weight
SPECIFICATIONS
Main Parts
SAFETY PRECAUTIONS
INSTALLATION
MAINTENANCE
WARRANTY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BORMANN BPA2000 Crane Electric Hoist Weight

BORMANN-BPA2000-Crane-Electric-Hoist-Weight-PRODUCT

SPECIFICATIONS

Main Parts

Motor
End hook
Stop bracket
Steel cable
Pulley hook
Controller

Technical Data

The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products.
The parts described/illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair, or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death.
The manufacturer and the importer shall not be liable for injuries and damages resulting from the use of non-conforming equipment.

SAFETY PRECAUTIONS

WARNING! Before using this electric tool, carefully read the general safety rules listed below.
Your sockets must comply with the safety rules. In case your sockets are not suitable, they should be checked by a skilled electrician.
Your socket plug must be grounded and your electric system must be supplied with a magneto cut-out safety device.
When the machine is running unsupervised, make sure that children cannot reach it.
Do not pull the electric cable to disconnect the plug.
The machine shall be protected from frost and low temperatures.
The machine shall not be operated when it is raining or during storm conditions.
In case the machine cannot hoist a load, do not keep pressing the hoisting push button.
This means that the load exceeds the machine’s maximum capacity.
The machine shall not be disassembled when running or connected to power.
Do not stand under hoisted weights.
Before starting to work with the machine, make sure that the steel cable is correctly winded around the reel and the pitch is equal to the cable diameter, carefully observe for example the following figure:
WARNING! Observe the maximum load indicated on the hoist, not that on the hook.
Leave at least three turns of cable around the reel, so that the cable connection is not under stress.
To avoid any danger, do not wind more than 15 m of cable around the reel.
In case the steel cable is worn out, it must be replaced only with a cable with the same features manufactured by the original supplier.
Such cables and accessories can be found at all authorized service centers.
Before starting to work, check that all switches are in good operating condition.
In case the hoist stops during the lowering of a load, it is normal that the load goes down a few centimeters more than expected because of inertia.
ATTENTION! The hoist electric motor is not supplied with any overload cut-out (to avoid an unexpected and unwanted re-start). Therefore if you are unable to hoist a load do not insist & let the motor cool down.

INSTALLATION

The hoist (standard version) is provided with a specially designed bracket system that allows it to hold pipe boxes.
Check that the socket features (voltage, frequency) correspond to those indicated on the machine plate; then, you can insert the plug.
In case a cable extension is needed, it is absolutely important to respect the table’s data.
Extension Length / Cable Section
Up to 20 m: 1.6 mm
20 – 50 m: 2 mm

MAINTENANCE

Periodically check that the steel cable is in good condition.
Check that the screws which are securing the brackets and the reduction gear are well tightened.
Check the condition and tightening of the nuts securing the steel cable clamps.
Periodically check that the motor stop switch and push button switch remain in good operating condition.
WWW.NIKOLAOUTOOLS.GR

WARRANTY

The power tools have been manufactured according to strict standards, set by our company, which are aligned with the respective European quality standards. The power tools of our company are provided with a warranty period of 24 months for non-professional use, 12 months for professional use, and 6 months for batteries. The warranty is valid from the date of purchase of the product. Proof of the warranty right is the purchase document of the tool (retail receipt or invoice). Under no circumstances shall the company cover the relevant cost of spare parts and respective required working hours unless a copy of the purchase document is presented. In case the repair has to be done by our service department the cost of transpor- tation (to and from) is entirely borne by the sender (client). The tools must be sent for repair to the company or to an authorized workshop in the appropriate way and means of transport.

WARRANTY EXEMPTIONS AND RESTRICTIONS:

Spare parts that wear out naturally as a consequence of being used (brushes, cables, switches, chargers, chokes, etc.).
Tools damaged as a result of non-compliance with the instructions of the manufacturer.
Tools poorly maintained.
Use of improper lubricants or accessories.
Tools are given to third entities free of charge.
Damage due to an electrical connection at a voltage other than that indicated on the appliance plate.
Connection to a non-earthed power supply.
Change in current voltage.
Damage resulting from the use of salty water (e.g., washing machines, pumps).
Damage or malfunction resulting from improper cleaning procedure of the tool.
Contact of the tool with chemicals, or damage as a result of moisture or corrosion.
Tools that have been modified or opened by unauthorized personnel.
Tools used for rent.

The warranty covers only the free-of-charge replacement of the component that presents a manufacturing defect or material failure. In case of a lack of a specific spare part, the company reserves the right to replace the tool with another corresponding model.
After all warranty procedures have been concluded, the warranty period of the tool shall not be extended or renewed. The spare parts or tools that are replaced remain in the possession of our company.
Requirements, other than those mentioned in this warranty form, regarding power tools repair or damage thereof, do not apply. Greek law and relative regulations apply to this warranty.
This appliance is a quality product. It was designed in compliance with current technical standards and made carefully using normal, good-quality materials.
The warranty period is 24 months for non-professional use and 12 months for professional use and commences on the date of purchase, which can be verified by the receipt, invoice, or delivery note.
During this warranty period all functional errors, which, despite the careful treatment described in our operating manual, are verifiably due to material flaws, will be rectified by our after-sales service staff.
The warranty takes the form that defective parts will be repaired or replaced with perfect parts free of charge at our discretion. Replaced parts will become our property.
Repair work or the replacement of individual parts will not extend the warranty period nor will it result in a new warranty period being commenced for the appliance.
No separate warranty period will commence for spare parts that may be ted.
We cannot offer a warranty for damage and defects on appliances or their parts caused by the use of excessive force, improper treatment, and servicing.
This also applies to failures to comply with the operating manual and the installation of spare and accessory parts that are not included in our range of products.
In the event of interference with modifications to the appliance by unauthorized persons, the warranty will be rendered void.
Damages that are attributable to improper handling, overloading, or natural wear and tear are excluded from the guarantee.
Damages caused by the manufacturer or by a material defect will be corrected at no charge by repair or by providing spare parts.
The prerequisite is that the equipment is handed over assembled, and complete with the proof of sale and guarantee.
For a guarantee claim, only use the original packaging. That way, we can guarantee quick and smooth guarantee processing.
Please send us the appliances post-paid or request a Freeway sticker. Unfortunately, we will be unable to accept appliances that are not postpaid.
The warranty does not cover parts that are subject to natural wear and tear.
If you wish to make a warranty claim, report faults, or order spare parts or accessories, please contact the after-sales center: Subject to change without prior notice.
The instructions manual is also available in digital format on our website www.nikolaoutools.gr. Find it by entering the product code in the Search field.