CONNY CO2 Ampel Traffic Light User Manual
- June 5, 2024
- CONNY
Table of Contents
CONNY CO2 Ampel Traffic Light User Manual
Commissioning of the CO2 Ampel®
The CO2 Ampel® has the option of two operating variants: simple local operation and extended cloud-based operation.
Local offline operations
In addition to the CO2 Ampel®, you only need a 230V outlet for local operation. Insert the power plug into the outlet. The CO2 Ampel® will light up once, play the signal tone and take in the surrounding air. The CO2 concentration is measured and the measured value is displayed in colour according to the current air quality. The coloured display is based on the preset threshold values (see sticker CO2 Ampel® / packaging). With the help of the app, the threshold values can be adjusted later (see chapter “Mobile application”). No internet connection of the CO2 Ampel® is necessary for this. If local operations are used, measured data are not saved.
Function test
For the function test, please blow frequently into the side openings of the device at a small distance. If there is sufficient CO2 exhalation, the CO2 Ampel® will then show the exceeded threshold value in colour. After good ventilation, the display of the CO2 Ampel changes back to green.
Cloud-Operation
For cloud-based operation you need a WiFi router, a stable WiFi connection and the “CO2 Ampel®” app from the Google Play Store (Android) or App Store (Apple / iOS) (see chapter “Mobile Application”)
The cloud-based operation offers the following advantages:
- Adjustment of threshold values in the event of legal changes or personal preferences
- Switching the acoustic signal on / off (when threshold values are exceeded)
- Documentation of measurement data by uploading it to the provided cloud
- Monthly report including visualization
- Grouping of several CO2 Ampel® into individual system units (e.g. “ground floor”, “School A”, “Company B”, “open-plan office”, etc.)
- Receive push notifications (app usage) when threshold values are exceeded or in case of device failure
- Connect the CO2 Ampel® with other devices such as room ventilation and ventilation devices (e.g. HEPA filter) or electric window openers
Mobile Application / App use
Please make sure that you have the latest version of the CO2 Ampel® app installed on your smartphone. Proceed in the same way as when installing the CO2 Ampel® app (see chapter: “Installation of the CO2 Ampel® app”). If a more recent version is available, the “Update” button appears in the Google Play Store or App Store.
Local offline device operation
A CO2 Ampel® App Account is not required to operate the device locally.
-
Installation of the CO2 Ampel®-App
Search in the Apple Store (iOS) or in the Google Play Store (Android) for “CO2 Ampel®” and download the app via “Download”. Note: The smartphone must be connected to the Internet and must not be connected to the WiFi of the CO2 Ampel®. -
Connecting to the WiFi of the CO2 Ampel®
Select the WiFi of your CO2 Ampel® in the WiFisettings of your smartphone
(Settings -> WiFi) and connect to it. [The name and password of your CO2
Ampel® can be found on the nameplate (back / packaging), e.g. “CO2_Ampel_F7D8”
see illustration.] If you receive the message “Your smartphone is not
connected to the Internet”, ignore it. Note: You are now connected to the WiFi
of your CO2 Ampel® and no longer to the Internet.
Local operation
Open your CO2 Ampel® app and select “local operation”. If you are still logged
in to your CO2 Ampel® app account, please log out again or select “local
operation” under settings. Auswahl: Live-View
To display the current measured value of your CO2 Ampel®, select “Live View”.
1. Select: Threshold configuration In order to change the preset threshold values (these can be found on the nameplate on the back / packaging), select “Threshold configuration”. Here you can select variable threshold values for green / yellow and yellow / red.
2. Select: WiFi Integration This selection is required if you want to operate your CO2 Ampel® in cloud based operation (see chapter “Operating mode B: Cloud connection”) Please disconnect the WiFi connection between your smartphone and CO2 Ampel® after successful configuration.
Cloud-connection of the CO2 Ampel®
In addition to the CO2 Ampel®, you need the access data of the respective WiFi into which you want to integrate the CO2 Ampel®.
-
Install the CO2 Ampel®-App
Search in the Apple Store (iOS)
or in the Google Play Store (Android) for “CO2 Ampel®” and download the App
via “Download”. Information: The smartphone must be connected to the Internet
(WiFi / mobile data) and must not be connected to the WiFi of the CO2 Ampel®. -
Create an account
Please open your CO2 Ampel® app and create an account under “Create account”. To do this, enter your email address, choose a password and accept the data protection agreement.
Information: To do this, your smartphone must be connected to the Internet (WiFi / mobile data). -
Accept the data protection agreement
A data protection agreement has been sent to your registered email address. Please read it through and confirm it. -
Use of the CO2 Ampel®-App
-
Adding a new device
-
To add a new device, select “Add” for iOS in the lower control bar. For Android, select “Add” under Settings.
-
Enter the CO2 Ampel® code manually or scan the QR code. Information: To do this, the camera for the CO2 traffic light app must be enabled in the CO2 traffic light app settings.
-
Give your CO2 Ampel® an individual name.
-
Select an existing group or create a new one (mandatory)
-
Save your entry. The CO2 Ampel® will now appear under “Devices”
-
WiFi-Integration
In order for your CO2 Ampel® to communicate with the provided cloud (e.g. enables the receipt of push messages), it must be connected to your WiFi (private or institutional). -
Connecting to the CO2 Ampel®’s WiFi
In the WiFi settings of your smartphone (Settings -> WiFi) select the WiFi of
your CO2 Ampel and connect to it. (The name and password of your CO2 Ampel can
be found on the type plate (back / packaging), e.g. “CO2_Ampel_F7D8” see
figure). If you receive the message “Your smartphone is not connected to the
Internet”, ignore it.
Note: You are now connected to the CO2 Ampel WiFi and no longer to the
Internet.
2. Open your CO2 Ampel® app
3. Select „lokalen Operation“
4. Select „WiFi integration“
5. Select the WiFi network, in which you wish to integrate your CO2 Ampel® into.
6. Enter the WiFi password (you can find the password e.g. on the back of the router).
7. Disconnect the WiFi connection between your smartphone and your CO2 Ampel®. Note: In the specific WiFi settings of the CO2 Ampel® “Connect automatically: Off” so that in future your smartphone does not automatically connect automatically to the WLAN of the CO2 traffic light instead of your private / institutional one.
3. Receive push notifications If you have successfully connected your CO2 traffic light to your WLAN and
this has thus been integrated into the cloud, you will automatically receive
push notifications when the set threshold values are exceeded or not reached.
Please disconnect the WiFi between your smartphone and the CO2 Ampel® after
successful configuration.
ISIS IC GmbH, Handelsweg 2, D-46485 Wesel
Web: www.co2ampel.online
E-Mail: [email protected]
Tel +49 281 33839-0
