WICLOCK L5V 2N6 Smart Wireless Charger Smart Alarm Clock User Manual
- June 1, 2024
- WICLOCK
Table of Contents
WICLOCK L5V 2N6 Smart Wireless Charger Smart Alarm Clock
USER MANUAL
WHAT’S INCLUDED:
- 1 x Wireless Charger Clock
- 1 x USB to Micro-USB charging cable
- 1 x Instruction Manual
OVERVIEW
1. ON/OFF
2. +VOL/NEXT
3. MENU
4. -VOL/PREVIOUS
5. Micro USB Input
6. Time Display
7. Temperature Display
8. Wireless Charging Pad
9. Reset
INSTRUCTIONS:
1. Press the ON/OFF button. LED screen will display the Time and Temperature
after warm up. Short press ON/OFF button to adjust the display brightness.
There are 4 levels of brightness available.
2. Press the MENU button to choose desired mode (Time/Date/A1/A2/A3). To
choose a mode, long press the MENU button when the desired mode apprears on
the screen.
3. Press and hold the MENU button to enter the setting state, and to adjust
the setting digit, press and hold the arrow buttons to advance or decrease the
digit rapidly.
PRODUCT FEATURES
Time:
1. Setting range:
- hour:1-12 hour or 0-23 hour
- Minute: 00–59
2. PM (evening) is indicated by an illuminated dot next to the time (left side).
Date:
1. Setting range:
- Month: 1-12
- Day: 1-31
- Year: 2000-2099
2. Setting detail: If idle for 15 seconds, the settings menu will changev to the chosen display mode:
- Dp-1 Displays the Date for 15 seconds and then displays the Time
- Dp-2: Displays the Date
- Dp-3: Displays the Time
Alarm:
A. When Alarm is set, an indicator light will illuminate next to the time
(right side).
B. When Alarm sounds, press any button to silence. If Alarm is not silenced,
it will turn off after 60 seconds and reset for the next day.
Temperature:
A. At start up, the current temp is automatically detected and displayed.
Default temp unit is 0°C – 50 °C (32°F – 122°F). Temp will automatically
update every 60 seconds.
B. To switch to Fahrenheit/Celcium, press the down arrow button for 2 seconds.
C. The temperature will always display except for Power-save mode (ON).
Power-saving:
Turn on/off the power-saving function by pressing the “DOWN”button. (ON with
display oNSd and OFF shows –Sd). Press twice to switch Standby or Power saving
status.
External power-off protection:
If power supply is inerrupted, clock function will keep time though the LED display will turn off and buttons will be unresponsive. Once powered is restored, the time will resume appropriately.
SAFETY PRECAUTIONS:
WARNING— When using this product, basic precautions should always be followed, including the following:
1. Do not use on an aircraft or in a hospital.
2. To reduce the risk of injury, close supervision is necessary when the
product is used near children.
3. Do not expose the device to any moisture.
4. Do not use the device in excess of its output rating. Overloaded outputs
above rating may result in a risk of fire or injury.
5. Do not use the device if damaged or modified. Damaged or modified device
may exhibit unpredictable behavior resulting in fire, explosion or risk of
injury.
6. Do not disassemble the device. Seek assistance from a qualified service
person when service or repair is required. Incorrect reassembly may result in
a risk of fire or injury.
7. Do not expose the device to fire or excessive temperature. Exposure to
extreme heat may cause explosion.
8. Have servicing performed by a qualified repair person using only identical
replacement parts to ensure that the safety of the product is maintained.
9. This device is not a toy.
10. Do not overcharge Phone. Unit may get hot with excessive use. Remove
Phone when it is fully charged. Never charge for more than 7 hours at a time.
TECH SPECIFICATIONS:
Input power: 5V/1.5A
Wireless Output: 5V/1A 5W
WARNINGS
KEEP OUT OF REACH OF CHILDREN
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
MADE IN CHINA
INSTRUCTIONS FOR RECYCLING AND DISPOSAL:
This label means that the product cannot be disposed of as other household waste throughout the EU. To prevent potential damage to the environment or human health from uncontrolled waste disposal. Recycle responsibly to promote the sustainable use of material resources. If you want to return a used device, use the drop-off and collection system, or contact the retailer from whom you bought the product. The retailer can accept the product for environmentally safe recycling.
A declaration by the manufacturer that the product complies with the requirements of the applicable EU Directives.
FAQ:
Q: How do I set the alarm on the Wireless Charger Clock?
A: To set the alarm, navigate to the Alarm setting using the MENU button and use the +VOL/NEXT button to adjust the desired time. Once set, an indicator light will illuminate next to the time.
Q: Can I switch between Fahrenheit and Celsius on the temperature
display?
A: Yes, you can switch between Fahrenheit and Celsius by pressing the down arrow button for 2 seconds.
Q: How do I turn on/off the power-saving function?
A: Press the DOWN button to toggle the power-saving function. ON will display as oNSd and OFF as –Sd. Press twice to switch between Standby and Power-saving status.
Q: What should I do if the clock display turns off due to external power
interruption?
A: In case of a power interruption, the clock function will continue internally. Once power is restored, the time display will resume appropriately.