EYENIMAL NGFON017 Smart Bloom Pet Fountain User Guide
- June 11, 2024
- EYENIMAL
Table of Contents
EYENIMAL NGFON017 Smart Bloom Pet Fountain
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications to this equipment not expressly approved by NUM’AXES may cause, harmful interference and void the FCC authorization to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Responsible party: EYENIMAL INC World Financial District 60 Broad Street – Suite 3502 New York, NY 10004 sales@eyenimal.com
IC Warning Statements
This digital apparatus complies with Canadian CAN ICES-3(B)/NMB-3(B).
EU Declaration Of Conformity
- AXES
- declares that
EYENIMAL Smart Bloom Pet Fountain NGFON012
- complies with EU standards
Directive LVD 2014/35/EU – The LVD Directive 2014/35/EU
- EN 61558-1: 2005+A1: 2009 +A2: 2009
- EN 61558-2-6: 2009
Directive EMC 2014/30/EU – The EMC Directive 2014/30/EU
- EN 55014-1: 2017,
- EN 55014-2: 2015
- EN 61000-3-2: 2014,
- EN 61000-3-3: 2013
Directive ROHS 2011/65/EU et son annexe Directive (EU) 2015/863
- IEC 62321-3-1:2013 IEC 62321-5:2013 IEC 62321-4:2013+AMD1:2017 CSV
- IEC 62321-6:2015 IEC 62321-7-1:2015 IEC 62321-7-2:2017 IEC 62321-8:2015
Thank you for choosing an EYENIMAL product. Please read these instructions carefully before use, and keep this guide for future reference.
Components
Assembly
- Remove all parts from the bowl.
- Add water as needed. Do not exceed the maximum water level.
- Place the lid on the bowl.
- Rinse the filter thoroughly with cold water to remove any loose charcoal dust.
- Place the filter on top of the lid and press down firmly.
- Place the fountain tray on top of the lid, making sure the tube connects to the pump outlet. Insert either flower nozzle or short nozzle.
- Connect the cable to AC adapter and plug the adapter into a wall socket.
2 different settings for water flow
- Insert the flower to create a fountainlike stream.
- Insert the short nozzle to create a gently flowing water surface.
Indicator lights instructions
- A. FILTER: when this indicator light is blinking, turn the power off and replace the filter. Long press the reset key to reboot product.
- B. NORMAL MODE/SMART MODE: in normal mode, this indicator lights up in white. In smart mode (regular intervals), the indicator lights up in blue. When the water level is low, it will blink to prompt you to add water.
- C. RADAR MODE: in radar mode, this indicator lights up in white. When the water level is low, it will blink to prompt you to add water.
- D. LED/RESET: press this button to turn the night light on. After replacing the filter, press the reset button for 2 seconds until the indicator stops blinking.
- E. ON/OFF SWITCH: press this button to turn product on and to change operating mode. Long-press to turn product off.
| Operating modes | Filter replacement time |
|---|---|
| Normal | Keeps working continuously. |
| Smart (regular intervals) | Works for 2 minutes then switches to |
standby for 3 minutes.
| 75 days
Radar
| Works for 90 seconds whenever your pet enters the sensor area. Pauses for 15 seconds if the pet stays into
the sensor area.
|
30 days
Cleaning & maintenance
Your fountain should be cleaned regularly. The cleaning frequency depends on the number of animals that use the fountain. The more animals use the fountain, the more often the fountain requires cleaning.
- Filter: for best results, the charcoal filter should be replaced every month. You can purchase a set of 6 filters from your retailer at any time or on NUM’AXES website at www.numaxes.com.
- Fountain: clean your fountain ideally every 2 weeks using warm soapy water.
- Pump: cleaning the pump is essential to the longevity of your fountain. The pump should be cleaned at least once a week following the instructions below:
- Gently lift the pump out of the fountain base.
- Remove the grill.
- Clean all parts with warm soapy water. Use a cotton bud or a toothbrush to remove any dirt. For a more in-depth cleaning, use white vinegar to clean the pump.
- Rinse all components thoroughly.
- Once they are clean and dry, re-assemble the pump components.
Technical features
| Capacity | 2 L |
|---|---|
| Range of the sensor area | Between 2 and 4 meters |
Safety guidelines
WARNING: when using electrical appliances, basic safety precautions should always be followed, including the following:
- Keep out of reach of children.
- Only use product parts recommended or sold by the manufacturer.
- Do not use outdoors. INTENDED FOR INDOOR USE ONLY.
- Do not unplug the appliance by pulling on the power cord. To unplug the appliance, grasp the plug, not the power cord.
- Do not operate the appliance if the cord or the plug are damaged, if the appliance malfunctions, or if the appliance has been dropped or damaged in any manner.
- Always unplug the appliance when not in use, before assembling or disassembling parts, and before cleaning.
- Before connecting the appliance to the mains, ensure that the voltage input mentioned on the product matches your local power voltage.
- In the event of a pump dysfunction, do not attempt to repair it yourself.
Warranty
Troubleshooting
Should your product stop working or develop a fault, please read this guide
over and make sure that the malfunction is not due to user error. If the
problem persists, contact your retailer or check out our FAQ section at
www.numaxes.com. You may also contact NUM’AXES at +33.2.38.69.96.27 or by
e-mail at export@numaxes.com. Depending on the
extent of the malfunction, you may have to return your product for service and
repair. For repairs, please return the complete product and the proof of
purchase (invoice or sales receipt).
Warranty
NUM’AXES guarantees the products against all manufacturing defects for two
years after purchase. All postage and packing charges will be the purchaser’s
sole responsibility.
Warranty conditions
- The warranty applies only upon submission of a proof of purchase (invoice or sales receipt). The warranty is exclusive to the original purchaser.
- This warranty does not cover the following:
- direct or indirect transport risks linked to the return of the product to NUM’AXES,
- product damage resulting from:
- negligence or fault on part of user (e.g.: bites, breakage, cracking),
- use contrary to instructions or for other than intended purpose,
- repairs conducted by unapproved technicians.
- loss or theft.
- If the product is found to be defective, NUM’AXES shall either repair or exchange it, as deemed fit by NUM’AXES.
- NUM’AXES shall not be held liable in any way for the damages resulting from incorrect use or product breakdown.
- NUM’AXES reserves the right to modify the characteristics of its products with a view to making technical improvements or to complying with new regulations.
- The information contained in this guide may be subject to amendment without prior notice.
- Photos and drawings are not contractual.
End-of-life product recycling or disposal
The pictogram affixed on your product indicates that it cannot be disposed
of with household waste. You must either bring the device to a collection
point for treatment, recovery, recycling and elimination of electronic waste,
or return it to your retailer. Safe disposal of electronic waste is an
environmentally friendly way to support the preservation of natural resources
and the protection of human health. For further information about collection
points for used equipment, you can either contact your local government/ waste
management services, or return the product to NUM’AXES.
Download the user’s guide
Download the user’s guide by scanning the QR code below:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>