KRUEGER H1 Designflotm Mounting Brackets Tag Installation Guide

: May 15, 2024
: KRUEGER

Table of Contents

SUBMITTAL SHEET
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

DESIGNFLO™ MOUNTING BRACKETS AND HANGERS

JOB NAME………………………..
ENGINEER……………………….
CONTRACTOR………………….
TAG………………………………….

SUBMITTAL SHEET

 H1 HARD SURFACE BRACKET KRUEGER H1 Designform Mounting Brackets Tag -
Figure 1

USED WITH FRAME TYPE C, F, OR B FOR INSTALLATION AGAINST F/8″ GYP BOARD CEILING OR SIDEWALL

 H2 HARD SURFACE BRACKET

USED WITH FRAME TYPE A OR C FOR FLUSH INSTALLATION IN 5/8″ GYP BOARD CEILING OR SIDEWALL

 H3 HARD SURFACE BRACKET KRUEGER H1 Designform Mounting Brackets Tag -
Figure 3

USED WITH FRAME BB (2-1/2″ OR 3″ SLOT WIDTHS) AND EE FOR A TAPE AND SPACKLED INSTALLATION IN 5/8″ GYP BOARD
USED WITH FRAME TYPE A FOR INSTALLATION BEHIND 5/8″ GYP BOARD

 H4 HARD SURFACE BRACKET KRUEGER H1 Designform Mounting Brackets Tag -
Figure 5

USED WITH ONLY FRAME TYPE D FOR INSTALLATION BEHIND 5/8″ GYP BOARD OR ABOVE A WALL

 W2 WALL BRACKET KRUEGER H1 Designform Mounting Brackets Tag - Figure
6

USED WITH FRAME TYPE A, C, D, OR F FOR INSTALLATION OF DFL PERPENDICULAR TO A WALL WITH A REVEAL EFFECT BETWEEN THE FLANGE AND WALL

 W3 WALL BRACKET KRUEGER H1 Designform Mounting Brackets Tag - Figure
8

USED WITH FRAME TYPE A OR D FOR INSTALLATION OF DFL PERPENDICULAR TO A WALL, WHERE FLANGE EDGE IS FLUSH AGAINST THE WALL. CANNOT BE USED WITH DFP PLENUM

 W4 WALL BRACKET KRUEGER H1 Designform Mounting Brackets Tag - Figure
7

USED WITH FRAME TYPE F FOR INSTALLATION OF DFL PERPENDICULAR TO A WALL WHERE FLANGE EDGE IS FLUSH AGAINST THE WALL

 US UPPER SUPPORT HANGER

USED WITH ALL FRAME TYPES, EXCEPT BB, FOR INSTALLATION IN EXPOSED CEILING TYPE INSTALLATION, SUCH AS METAL OR WOOD SLAT CEILINGS

 UC UPPER HANGER CLIP

USED WITH ALL FRAME TYPES, EXCEPT BB, FOR INSTALLATION IN EXPOSED CEILING TYPE INSTALLATION, SUCH AS METAL OR WOOD SLAT CEILINGS

 SC SPLINE CLIP

USED WITH ONLY FRAME TYPE A TO INSTALL INTO 9/16″ DROP FACE T-BAR GRID

 SS SPLINE SUPPORT BRACKET (AS SUPPLIED)

USED WITH ALL FRAME TYPES TO CONNECT MULTIPLE SECTIONS OF LINEAR TOGETHER

 SS SPLINE SUPPORT BRACKET (FIELD SHAPED)

USED WITH ALL FRAME TYPES TO COUPLE WITH 15/16″ T-BAR CEILINGS

Revision Date: 1/17/2024
Form: GC0107
Replaces: GC0107A.1 & GC0107B.2
Product Information is Subject to Change Without Notice

Documents / Resources

| KRUEGER H1 Designflotm Mounting Brackets Tag [pdf] Installation Guide
H1, H1 Designflotm Mounting Brackets Tag, Designflotm Mounting Brackets Tag, Mounting Brackets Tag, Brackets Tag, Tag
---|---