BURG sPinLock100 Numerical Combination Lock Instruction Manual
- May 15, 2024
- BURG
Table of Contents
BURG sPinLock100 Numerical Combination Lock
Spinlock100
A. number wheels
B. Guide line
C. opening for key tool
D. stator
General
The latest version of this guide is available at:
www.burg.de
Important: Please observe all warnings and read the entire operating
manual before starting the configuration.
Factsheet
Front view
Back view
Technical Data
| Dimension | Ø 46 mm x 19 mm |
|---|---|
| Material | Housing: plastic |
Stator: zamak
Mode| Private mode
Number wheels| 3
Code combinations| 999
Locking direction| Left (90°), door hinge: DIN right
Mounting hole| 16 mm x 19 mm
Lock attachment| M19 nut (1x)
Max. door thickness| 1 mm to 11 mm
Cam type| B
Code (default)| 0-0-0
Scope of Delivery
- 1x locking system
- 1x cam fixing screw (M4 x 8mm) with washer
- 1x M19 nut
- 1x key tool
Optional Accessories
- code finding tool
Features
- can be used in wooden and metal doors (indoor)
- compact dimensions
- simple installation (retro-fit)
- intuitive and easy to use
- with integrated function for code finding
- up to 999 possible code combinations
- simple code configuration
Product Dimensions
Front view
Side view
Mounting Dimensions
Functional Description
Mode: fixed assigned authorization (private mode)
In this mode, a code is preset with which the lock can be operated. This mode
is suitable for user groups where the usage rights should not change
permanently, e.g. for an office cabinet. The lock can only be operated with
the preset code.
Key tool
With the key tool the user code can be set. For this configuration step the
lock must be open.
Code finding tool
The code finding tool can be used to open the lock, e. g. if the code is lost.
The valid code can be read during this process. Note: the code finding tool is
not included in the scope of delivery and must be ordered separately
Configuration
-
Set the code
-
Set the valid code using the number wheels (factory setting 0-0-0).
-
Press the key tool into the opening on the side of the lock (see illustration) and hold:
-
Set the new code using the number wheels.
-
Remove the tool.
-
Code finding
-
Start with the right-hand number wheel. Position the code finding tool to the right of the number wheel. Slide it between the number wheel and the housing:
-
Carefully turn the number wheel until the tool clicks into place. Remove the tool.
-
Repeat the process for the other number wheels (from right to left).
-
Read the valid code. The lock is now unlocked.
Operation
- Unlock
- Set the valid code using the number wheels.
- Turn the lock 90° to the right and pull the door open.
- Lock
- Close the door and turn the lock to the starting position.
- Turn the number wheels.
Contact
BURG Lüling GmbH & Co. KG Volmarsteiner Str. 52 58089 Hagen (Germany)
+49(0)2335 6308-0
info@burg.de
www.burg.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>