BURG WACHTER SA 1280 Security Anchor Instructions
- June 3, 2024
- BURG WACHTER
Table of Contents
BURG WACHTER SA 1280 Security Anchor
Installation instructions
- Using the anchor plate as a template, drill 2 pilot holes using a Ø 10 mm drill bit.
- Remove plate and re-drill the two holes with a Ø 16 mm concrete bit to a depth of 85 – 90 mm.
- Remove the threaded bolts from the anchor fixings. Place the bolts through the holes in the anchor plate and hand tighten into the anchor fixings.
- Insert the two anchor fixings into the prepared holes.
- Holding the plate firmly against the wall or floor tighten the bolts, using a hexagonal head tool.
- Once fitted an checked the two steel balls can be hammered into the heads of the bolts. This makes it resistant to attack an unbolting.
BURG-WÄCHTER KG
Altenhofer Weg 15
58300 Wetter
Germany
References
Read User Manual Online (PDF format)
Loading......