VISIONIS VS-SS800-DL 800 Lbs Outdoor and Gate Electromagnetic Lock Installation Guide
- June 8, 2024
- VISIONIS
Table of Contents
VISIONIS VS-SS800-DL 800 Lbs Outdoor and Gate Electromagnetic Lock
Installation Guide
Basic Installation Concept & Accessories
Side Mounting
General Installation Steps & Maintenance
- Drill the armature plate holes in the door using the sticker template provided.
- Attach the armature plate to the door with the hardware provided as per the illustration.
- With the door closed, mark the door frame at the edge of the armature in order to properly align the electromagnet to the armature.
- Attach the mounting plate to the door frame using the self-tapping screws provided. Align the mounting plate with the mark from the previous instruction.
- Insert the wires through the hole in the mounting plate and attach the electromagnet unit to the mounting plate with the allen head fixing screw.
- Connect the power wires according to the instruction and test the system.
- It is recommended that to apply a light coat of silicon lubricant to the mating surface on a monthly basis to prevent rust.
Wiring Instructions
IMPORTANT!
Before the power supply is switched on, set the wiring correctly.
Specifications
- Voltage Input: 12 VDC / 24 VDC
- Current Draw: 12V / 480mA; 24V / 240mA (±5%)
- Holding Force: Up to 800 lbs (362 kg)
- Hall Effect Reed Contact: 28 VDC, 0.2A, 5W
- Anti-Rust Surface Treatment: Blue Zinc Plating
- Operating Temperature: 0°C~55°C ( 32°F~131°F)
- Operating Humidity: 0~95% (non condensing)
- Weight (Magnet): 2.3 kg (±1%)
- Dimensions: Magnet – (L) 220x (W) 46x (T) 28 mm – (L) 8.66 x (W) 1.81 x (T) 1.10 in.
- Armature – (L) 182x (W) 44x (T) 12 mm – (L) 7.16 x (W) 1.73 x (T) 0.47 in.
Disclaimer: VISIONIS reserve the right to go ahead with any modifications
of models or features or price without forewarning. All the information and
specifications stated in this document are current at the time of publication.
Attention: We are not responsible for the
improper installation of this kit. If you are not handy with electrical
equipment you should contact a professional electrician. You will also need to
check with your local Fire authority to see if you need anything else to
comply with local Fire Codes. We are not responsible for any damage or fees
that can occur.
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>