ENGO E55W230WIFI Wi-Fi Thermostat User Guide
- May 15, 2024
- ENGO
Table of Contents
ENGO E55W230WIFI Wi-Fi Thermostat
Product Information
- Technical Specifications
- Power supply: 230V AC 50 Hz
- Max current: 3 (1) A
- Temp. setpoint range: Not specified
- Display temp. accuracy : Not specified
- Control algorithm: Not specified
- Communication: Wi-Fi 2.4 GHz
- Control output: COM / NO (voltage-free relay)
- Dimensions [mm]: 55 x 55 x 39 (17 after mounting in a box with a diameter of 60)
- Product Introduction
- The Wi-Fi Thermostat is a flush-mounted temperature controller suitable for a 55×55 mm frame.
- It is designed to control surface heating with high thermal inertia and can also manage other heating or cooling systems based on user preferences.
- The built-in Wi-Fi module enables easy installation and operation through the ENGO Smart mobile app.
- Product Features
- Wi-Fi 2.4 GHz communication standard
- Compatibility with the ENGO Smart application (Tuya Cloud technology)
- TPI algorithm ideal for underfloor heating
- Heating/Cooling function
- Safety Information
- Ensure the device is used by national and EU regulations, keeping it dry and for indoor use only. Installation should be carried out by qualified personnel following applicable standards and regulations.
- Installation Instructions
- Installation must be performed by a qualified electrician. The connection diagrams for the boiler, pump/actuator, and control box are provided in the manual. Follow the instructions carefully to ensure proper installation.
- Connection Description
- Refer to the provided connection diagrams for connecting the thermostat to the boiler, pump/actuator, or control box. Ensure all connections are made correctly to avoid any issues.
- LCD Icon Description
- Down Button
- MENU Button
- Up Button
- Cloud connection
- Wi-Fi connection
- Current/Setpoint temperature
- Heating indicator
- Cooling indicator
- Schedule mode icon
- Temporary override mode
- FROST (anti-freeze mode)
- Temperature unit
- Settings icon/temperature settings
FAQs
- Q: What is the power supply requirement for the Wi-Fi Thermostat?
- A: The Wi-Fi Thermostat requires a power supply of 230V AC 50 Hz.
- Q: Can the thermostat control both heating and cooling systems?
- A: Yes, the thermostat can control both heating and cooling systems based on user settings.
- Q: How can I connect the thermostat to the Internet?
- A: The thermostat connects directly to the Internet via a 2.4GHz Wi-Fi network.
Technical specifications
- Power supply 230V AC 50 Hz
- Max current 3 (1) A
- Temp. setpoint range 5,0°C – 45,0°C
- Display temp. accuracy 0,1°C
- Control algorithm TPI or
- Hysteresis (±0,1°C – 2,0°C)
- Communication Wi-Fi 2,4 GHz
- Control output COM / NO (voltage-free relay)
- Dimensions [mm] 55 x 55 x 39 (17 after mounting in a box with a diameter of 60)
INTRODUCTION
- Flush-mounted temperature controller for mounting in 55×55 mm frame.
- Designed to control surface heating characterized by high thermal inertia.
- It can also control any other type of heating, as well as cooling systems – according to the user’s needs and settings.
- The built-in Wi-Fi module allows easy installation and operation of the heating system using the ENGO Smart mobile app.
- This product connects directly to the Internet via a 2.4GHz Wi-Fi network.
Products Features
- Wi-Fi 2.4 GHz communication standard
- compatibility with the ENGO Smart application (in Tuya Cloud technology)
- TPI algorithm ideal for underfloor heating
- HEATING/COOLING function
Product Compliance
This product complies with the following EU Directives: 2014/53/EU i 2011/65/EU.
SAFETY INFORMATION
- Use following national and EU regulations.
- Use the device only as intended, keeping it in a dry condition.
- The product is for indoor use only.
- Please read the entire manual, before installation or use.
Installation
- Installation must be performed by a qualified person with appropriate electrical qualifications, following the standards and regulations in force in a given country and in the EU.
- The manufacturer is not responsible for non-compliance with the instructions.
WARNING: For the entire installation, there may be additional protection requirements, which the installer is responsible for.
Connection Description
- a) Connection diagram for boiler:
- b) Connection diagram to pump / actuator:
- c) Connection diagram to the control box:
Legend:
LCD Icon Description + Button Description
- “Down” Button
- “MENU” Button
- “Up” Button
- Cloud connection
- Wi-Fi connection
- Current/Setpoint temperature
- Heating indicator
- Cooling indicator
- Schedule mode icon
- Temporary override mode
- FROST (anti-freeze mode)
- Temperature unit
- Settings icon/temperature settings
- Settings icon
- Button lock
- External/Floor or Occupancy sensor
Installation of thermostat in the app
- Make sure your router is within range of your smartphone.
- Make sure you are connected to the Internet.
- This will reduce the pairing time of the device.
Installation Steps
- STEP 1 – DOWNLOAD ENGO SMART APP
- Download the ENGO Smart app from Google Play or Apple App Store and install it on your smartphone.
- STEP 2 – REGISTER THE NEW ACCOUNT
- To register a new account, please follow the steps below:
- To register a new account, please follow the steps below:
- STEP 3 – CONNECT THE THERMOSTAT TO WI-FI
- After installing the app and creating an account:
- On your mobile device, make sure the ENGO Smart has access to permissions (Location, Bluetooth, Nearby devices). Then turn on Bluetooth and Location. Connect to the 2.4GHz Wi-Fi network to which you want to assign the device.
- Make sure the thermostat is powered on. Then press and hold the buttons on the thermostat for approx. 3 seconds until the display shows „PA”. Then release the keys. The pairing mode will be started up.
- In the app, select: „Add Device”.
- After finding the thermostat, go to „Add”.
- Select the Wi-Fi network in which the thermostat will operate and enter the password of this network.
- Wait for the app to configure the thermostat with the selected Wi-Fi network.
- Go „DONE”.
- The thermostat has been installed and displays the main interface.
Factory reset
To RESET the Thermostat to factory settings, hold down the buttons until the
FA message appears. Then release the keys. The thermostat will restart,
restore default factory settings and display the home screen. The device will
be removed from the app you will need to add it again.
Installer settings
- To enter installer parameters press and hold the button for 3 seconds.
- Use or . button to move between parameters. Enter the parameter by . Edit the parameter using or . Confirm the new parameter value with the button.
Installer parameters
CONTACT
- Ver. 1.0 Release date: 11 2024
- Soft: Main module v2.0.2 MCU v1.3.9
- Producer:
- Engo Controls S.C.
- 43-262 Kobielice
- 4 Rolna St.
- Poland
- Distributor:
- QL CONTROLS Sp zo.o. Sp. k.
- 43-262 Kobielice
- 4 Rolna St.
- Poland
- www.engocontrols.com.
Wi-Fi Thermostat suitable for 55×55 switch frame
- MODELS
Documents / Resources
| ENGO
E55W230WIFI Wi-Fi
Thermostat
[pdf] User Guide
E55W230WIFI Wi-Fi Thermostat, E55W230WIFI, Wi-Fi Thermostat, Thermostat
---|---
References
Read User Manual Online (PDF format)
Loading......