FLEXIT Nordic EcoNordic Indoor Climate Central Instruction Manual
- May 15, 2024
- FLEXIT
Table of Contents
FLEXIT Nordic EcoNordic Indoor Climate Central
Before your start
Which mode do you need? Please refer to the table to choose a proper mode.
Scenarios| Operating Modes
Local connection to the Flexit Nordic-/EcoNordic-product if no network is
available| Access Point Mode (Default Mode)
Connect the Flexit Nordic-/EcoNordic-product to a wireless network if no wired
(Ethernet) connection is possible| Client Mode
Configure the Access Point
ACCESS POINT MODE (DEFAULT)
Local connection to your Flexit Nordic-/EcoNordic-product if no network exist.
- Connect the access point according to Step A to D in the diagram.
- Power on the access point, wait until the Power ( ) and Wireless ( ) LEDs are lit and stable, and use the default SSID and Password printed on the label of the access point to join its Wi-Fi network.
- Connect to the Flexit Nordic-/EcoNordic-product using the Flexit Go App on your mobile device
CLIENT MODE
Connects your Flexit Nordic-/EcoNordic-product to a wireless network.
-
Connect the access point according to Step A to D in the diagram.
-
Power on the access point, wait until the Power ( ) and Wireless ( ) LEDs are lit and stable.
-
Use standard and the password on the label under the access point to connect to the Wi-Fi network to your mobile device/PC.
-
Launch a web browser and enter 192.168.0.254
Then log in using admin (all lowercase) for both username and password. -
Click Quick Setup and click Next.
-
Change Login Password if you want and then click Next.
-
Select Client mode and click Next. Follow the step-by-step instructions to complete the configuration.
-
Now your Flexit Nordic -/EcoNordic-product is connected to internet.
POWER ON VIA POE INJECTOR
Power the device with the included passive PoE injector when the access
point is located far from a power outlet.
Note: The passive PoE injector supports a cable length up to 30meters, but the value may vary due to the environment.
Technical data
-
DIMENSIONS
Overall dimensions (h x w x d): 36 x 181 x 125 mm -
Weight: ≤ 0,20 kg
AMBIENT CONDITIONS
- Operating Temperature Range: 0 to 40 °C
- Shipping & Storage Temperature Range: -40 to 70°C
- Relative Humidity: 10 – 90%, non-condensing
ELECTRICAL SPECIFICATION
- Mains Power Source: 9 V DC
- Maximum power consumption: 0,6 A
WIRELESS CONNECTION SPECIFICATIONS
- Communication frequency: 2,4 GHz
- Communication standards: IEEE 802.11n,IEEE 802.11g,IEEE 802.11b
Our products are subject to continuous development and we therefore reserve
the right to make changes.
We also disclaim liability for any printing errors that may occur.
Frequently Asked Questions (FAQ)
Q: How do I connect to the Flexit Nordic-/EcoNordic-product if no network
is available?
A: You can establish a local connection to the product using an Access
Point Mode or Client Mode, as detailed in the user manual.
Q: What should I do if I encounter issues with connecting to the wireless
network?
A: Ensure that you follow the instructions carefully, check your network
settings, and contact customer support for further assistance if needed.
Flexit AS, Televeien 15, N-1870 Ørje
www.flexit.no
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>