FLEXIT cvROBO Docking Station Instruction Manual
- June 4, 2024
- FLEXIT
Table of Contents
- FLEXIT cvROBO Docking Station
- Material supplied
- Optional
- Recommended installation spaces
- Dimensions required
- Connect the charging dock with the self cleaning base
- WALL CUFF CONECTION TO THE CENTRAL VACUUM SYSTEM INLET
- ASSEMBLY FLEXIBLE HOSE CONNECT TO DOCKING STATION
- ASSEMBLY PROTECTION COVER ON DOCKING STATION
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
FLEXIT cvROBO Docking Station
Material supplied
Illustrations show cvROBO. Installation and the docking station function are similar for cvROBO L1.
Optional
Wireless kit
ITR806
Joint for flexible tube
Recommended installation spaces
Dimensions required
Connect the charging dock with the self cleaning base
220V socket out cover
220V socket inside cover
WARNING
The connection cables must be positioned well and must not be squeezed under
the charging station.
The connection cables must be positioned well and must not be squeezed under the charging station.
WALL CUFF CONECTION TO THE CENTRAL VACUUM SYSTEM INLET
Socket point with ITR801
insert deeply until touching
WARNING
Important that the split on the wall cuff metal ring is placed between the
contact plugs in the wall inlet.
ASSEMBLY FLEXIBLE HOSE CONNECT TO DOCKING STATION
Tube inserted into the base directly
ASSEMBLY PROTECTION COVER ON DOCKING STATION
Connection with wall inlet
Docking station under kitchen cabinet
Watch installation videos on Flexit’s website b Scan QR code
References
Read User Manual Online (PDF format)
Loading......