NOVUS 100 RTSP Streaming in Intercoms Instruction Manual
- May 15, 2024
- Novus
Table of Contents
NOVUS 100 RTSP Streaming in Intercoms
Product Information
The 100 series intercoms support RTSP streaming for enhanced security and
monitoring capabilities.
Specifications
- Model: 100 series
- Version: 1.0
- Manufacturer: AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
- Default Installer Password: admin123
- Default Streaming Port: 554
Product Usage Instructions
- Follow the monitor’s user manual instructions to add the panel to the monitor’s device list.
- Change the IP address of the panel from DHCP to a specific static IP address.
- Access RTSP settings by selecting the RTSP option.
- Enter the current installer password for confirmation.
- Set a new installer password for the panel.
- Confirm the new installer password.
Starting RTSP Streaming from the Network Interface Client
- Login to the panel through a web browser using the default credentials.
- Access network settings and enable ONVIF.
Adding RTSP Stream from Panel to Novus 6000 Recorder
- Login to the recorder, navigate to settings, and select “Add Camera”.
- Manually add the RTSP stream from the panel.
Adding RTSP Stream from Panel to Novus 4000 Recorder
Login to the recorder, go to settings, and choose “Channels”.
Frequently Asked Questions (FAQ)
What is the default installer password for the panel?
The default installer password for the panel is admin123.
Starting RSTP streaming in series 100 entrance panels
All series 100 entrance panels in the AAT offer, both IP and 2-WIRE, have RTSP
streaming functions. The RTSP stream in the panel can be started both through
the monitor and through the panel’s web interface client.
A. Starting RTSP streaming from the monitor.
To start RTSP from the entrance panel from the monitor level, first, in accordance with the monitor’s user manual, add this panel to the list of monitor devices; after searching again, a gear will appear next to the panel’s IP address instead of a plus sign.
After pressing the gear, the following window will appear 
In the window shown on the previous page, you can change the IP address of the panel, from DHCP to a specific fixed IP address, after selecting the RTSP option, the RTSP stream settings will open.
| RTSP | ON | Enables and disables RTSP streaming and ONVIF protocol |
|---|
OFF
Enter password| In this field, enter the current password of the panel to
confirm changing of the password.
New password| In this field, enter new password of the panel.
Confirm new password| In this field, confirm new password of the panel.
Mainstream| This field displays the RSTP stream path for the mainstream.
Substream| This field displays the RSTP stream path for the substream.
REMARKS!
- Default password of the panel is admin123.
- In RTSP stream paths, replace “password” with the current password.
- For the default password admin123 and the example address 192.168.0.143, the paths look like this:
- Mainstream path: rtsp://admin:admin123@192.168.0.143/01/main
- Substream path: rtsp://admin:admin123@192.168.0.143/01/sub
Starting RTSP streaming from the webclient.
To start RTSP streaming, log into the panel via webbrowser.
From the „Device Management” menu it is possible to check IP address of the
entrance panel.
Default login: admin Default- password: admin123
After logging in to the panel, go to network settings, then enable ONVIF.
REMARKS!
- Default password of the panel is admin123.
- In RTSP stream paths, replace “password” with the current password.
- For the default password admin123 and the example address 192.168.0.143, the paths look like this:
- Mainstream path: rtsp://admin:admin123@192.168.0.143/01/main
- Substream path: rtsp://admin:admin123@192.168.0.143/01/sub
Adding RTSP stream from series 100 entrance panels to a Novus series 6000
recorder
After logging in to the recorder, select “settings” from the start menu. Then, from the settings menu, select Camera -> Add camera.
To add an RTSP stream from the panel, then go to “Add manually”. 
- In the Protocol column, select Protocol Management.
- Novus 6000 series recorders allow you to create several predefined RTSP protocols.
- To configure the protocol for 100 series entry panels, select:
Adding RTSP streams should start by selecting the RTSP protocol, only then the menu will adapt to entering RTSP streams.
| Option | Description |
|---|---|
| Main URL | Wprowadzić ścieżkę RTSP dla kanału głównego. W rejestratorach 4000 |
ścieżki wprowadzamy bez nazwy użytkownika i hasła. Dla paneli wejściowych serii 100 o przykładowym adresie 192.168.47.28 należy wprowadzić:
Sub URL| Wprowadzić ścieżkę RTSP dla kanału głównego. W rejestratorach 4000 ścieżki wprowadzamy bez nazwy użytkownika i hasła. Dla paneli wejściowych serii 100 o przykładowym adresie 192.168.47.28 należy wprowadzić:
Alias| Wprowadzić nazwę kamery
Protocol| Pozostawić protokół jako RTSP
User name| Wprowadzić nazwę użytkownika, dla paneli serii 100 będzie to
admin
Password| Wprowadzić hasło do panelu wejściowego, domyślne admin123
Przypisz kanały| Wybrać do którego kanału rejestratora ma zostać przypisany
strumień RTSP z panelu wejściowego.
After entering the settings according to the table above, use the “add” button.
NOTATKI (NOTES)
Antoniuk Fabryczny 22, 15-741 Biatystok tel./faks 85 688 32 33, 85 688 32 34 e-mail: aat.bialystok@aat.pl , www.aat.pl
NIP: 9512500868, REGON: 385953687, BDO: 000433136
Wpisana do rejestru przedsiębiorców prowadzonego przez Sąd Rejonowy dla m.st.
Warszawy w Warszawie,
XIII Wydział Gospodarczy Krajowego Rejestru Sądowego pod numerem KRS
0000838329,
kapitał zakładowy wpłacony w całości w wysokości: 17 005 000 PLN
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>