NOVUS NVE-PV100 Power Adapter Instruction Manual
- October 27, 2023
- Novus
Table of Contents
NOVUS NVE-PV100 Power Adapter
THE PRODUCT MEETS THE REQUIREMENTS CONTAINED IN THE FOLLOWING DIRECTIVES:
Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC Text with EEA relevance.
Directive 2014/30/EU of the European Parliament and of the Council of 26
February 2014 on the harmonisation of the laws of the Member States relating
to electromagnetic compatibility (recast) Text with EEA relevance.
Directive 2014/35/EU of the European Parliament and of the Council of 26
February 2014 on the harmonisation of the laws of the Member States relating
to the making available on the market of electrical equipment designed for use
within certain voltage limits Text with EEA relevance.
Directive 2012/19/EU of the European Parliament and of the Council of 4 July
2012 on waste electrical and electronic equipment (WEEE) Text with EEA
relevance
Directive 2011/65/EU of the European Parliament and of the Council of 8 June
2011 on the restriction of the use of certain hazardous substances in
electrical and electronic equipment Text with EEA relevance
Information
The device, as a part of professional intercom system used for surveillance and control, is not designed for self -installation in households by individuals without technical knowledge.
WARNING!
PRIOR TO UNDERTAKING ANY ACTION THAT IS NOT DESCRIBED FOR THE GIVEN PRODUCT IN
USER’S MANUAL AND OTHER DOCUMENTS DELIVERED WITH THE PRODUCT, OR IF IT DOES
NOT ARISE FROM THE USUAL APPLICATION OF THE PRODUCT, THE MANUFACTURER MUST BE
CONTACTED UNDER THE RIGOR OF EXCLUDING THE MANUFACTURER’S RESPONSIBILITY FOR
THE RESULTS OF SUCH AN ACTION.
WARNING!
THE KNOWLEDGE OF THIS MANUAL IS AN INDISPENSABLE CONDITION OF A PROPER DEVICE
OPERATION. YOU ARE KINDLY REQUSTED TO FAMILIRIZE YOURSELF WITH THE MANUAL
PRIOR TO INSTALLATION AND FURTHER DEVICE OPERATION.
WARNING!
USER IS NOT ALLOWED TO DISASSEMBLE THE CASING AS THERE ARE NO USER
-SERVICEABLE PARTS INSIDE THIS UNIT. ONLY AUTHORIZED SERVICE PERSONNEL MAY
OPEN THE UNIT INSTALLATION AND SERVICING SHOULD ONLY BE DONE BY QUALIFIED
SERVICE PERSONNEL AND SHOULD CONFORM TO ALL LOCAL REGULATIONS
WARNING!
INFORMATION IN THIS MANUAL IS SUBJECT TO CHANGE WITHOUT NOTICE. THE COMPANY
AAT SYSTEMY BEZPIECZEŃSTWA SP. Z O.O. RESERVES THE RIGHT TO EXPLANATE AND
UPDATE THE INFORMATION CONTAINED IN THIS DOCUMENT.
IMPORTANT SAFEGUARDS AND WARNINGS
-
Prior to undertaking any action please consult the following manual and read all the safety and operating instructions before starting the device.
-
Please keep this manual for the lifespan of the device in case referring to the contents of this manual is necessary;
-
All the safety precautions referred to in this manual should be strictly followed, as they have a direct influence on user’s safety and durability and reliability of the device;
-
All actions conducted by the servicemen and users must be accomplished in accordance with the user’s manual;
-
The device should be disconnected from power sources during maintenance procedures;
-
Usage of additional devices and components neither provided nor recommended by the producer is forbidden;
-
Mounting the device on unstable surface or using not recommended mounts is forbidden.
-
Improperly mounted device may cause a fatal accident or may be seriously damaged itself. Device must be mounted by qualified personnel with proper authorization, in accordance with this user’s manual;
-
Device should be supplied only from a power sources whose parameters are in accordance with those specified by the producer in the device’s technical datasheet. Therefore, it is forbidden to supply the device from a power sources with unknown parameters, unstable or not meeting producer’s requirements;
-
Signal and power cables should be placed in a way excluding the possibility of damaging them by accident. Special attention must be paid to cables getting from the device and connecting the power supply;
-
Electric installation supplying the device should be designed to meet the specifications given by the producer in such a way that overloading is impossible;
-
User cannot repair or upgrade the equipment himself. All maintenance actions and repairs should be conducted only by qualified service personnel;
Unplug the device from the power source immediately and contact the proper maintenance department when the following occurs: -
Damages to the power cord or to the plug itself;
-
Liquids getting inside the device or exposure to strong mechanical shock;
-
Device behaves in a way not described in the manual and all adjustments approved by the
-
manufacturer and possible to apply by user himself, seem not to have any effect;
-
Device is damaged;
-
Atypical behaviour of the device components may be seen (heard).
-
In necessity of repairs attention to using only original replacement parts (with their parameters in accordance with those specified by the producer) should be paid. Non-licensed service and non-genuine replacement parts may cause fire or electrocution;
-
After maintenance activities tests should be run to ensure proper operation of all the functional components of the device.
Package contest
- Power adapter
- Short manual
General characteristics
Power adapter 15 VDC / 0.8 A / 12 W, designed to work with Novus 100 series monitors and video intercom entrance panels. Universal AC input voltage range.
Technical data
General
Device type| Power adapter
Input voltage| 100-240 VAC/0.6 A/50-60 Hz
Output voltage| 15 VDC
Output current| 0.8 A
Output power| 12 W
Output voltage regulation| No
Installation parameters
Dimensions (mm)| 41 mm x 59 mm x 26,5 mm
Housing material| Plastic
Working temperature| 0°C ~ 45°C
Dimensions
NIP: 9512500868, REGON: 385953687, BDO: 000433136
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>