komvox GT60 Professional Walkie Talkies for Adults User Manual

: June 14, 2024
: KOMVOX

Table of Contents

komvox GT60 Professional Walkie Talkies for Adults
Product Information
Product Usage Instructions
GT60 UNIT
SPECIFICATION
OTHERS **
ABOUT RANGE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

komvox GT60 Professional Walkie Talkies for Adults

Product Information

The GT60 is a portable radio unit designed for communication over long distances. It comes with various features and components to enhance the user experience.

Belt Clip/Neck Strap Hole : Allows for easy carrying and accessibility.
Antenna : Enhances signal reception and transmission.
PTT Button: Push-to-talk button for initiating communication.
Microphone : Built-in microphone for clear voice transmission.
Power Button: Turns the radio on/off.
Scan Button: Scans for available channels.
Menu Button: Accesses the menu options.
Lock Button : Locks/unlocks the radio settings.
Speaker: Provides audio output for incoming communications.
Lamp: Integrated lamp for illumination in low light conditions.
LCD Panel : Displays information such as channel frequency and battery level.
Charge Jack : Used for charging the radio’s battery.
Headset Jack : Connects external headset for hands-free communication.
Up/Down Buttons: Navigate through menu options and adjust volume.
Call Button/Monitor: Initiates a call or monitors incoming transmissions.
Lamp Button : Controls the integrated lamp.

Product Usage Instructions

To use the GT60 radio, follow these steps:

Attach the belt clip or neck strap to the designated hole for easy carrying.
Extend the antenna fully to ensure optimal signal reception.
To initiate communication, press and hold the PTT button while speaking into the microphone.
Use the power button to turn the radio on/off.
Press the scan button to search for available channels.
Access the menu options by pressing the menu button.
Lock/unlock the radio settings using the lock button.
Listen to incoming communications through the speaker.
Use the lamp for illumination in low light conditions.
The LCD panel displays important information such as channel frequency and battery level.
Charge the radio’s battery by connecting the charge jack to a suitable power source.
Connect an external headset to the headset jack for hands-free communication.
Adjust volume or navigate through menu options using the up/down buttons.
Initiate a call or monitor incoming transmissions using the call button/monitor.
Control the integrated lamp using the lamp button.

GT60 UNIT

Belt Clip/ Neck strap hole
Antenna
PTT Button
Microphone
Power Button/ Scan Button
Menu Button/ Lock Button
Speaker
Lamp
LCD Panel
Charge jack/ Headset jack
Up Button
Call Button/Monitor
Lamp Button
Down Button

SPECIFICATION

16 Channels
Call Alert
142 Privacy Codes (38 CTCSS and 104 DCS)
Headset Jack
Up to 10 km
Battery Level Meter
Internal VOX Circuitry
Built-in Rechargeable Lithium polymer
10 Selectable Call/Ring Tone Alerts Batteries
Backlit LCD Display
Channel Scan
Roger Beep
Keypad Lock

*Range may vary depending on environmental and/or topographical conditions.

COMPONENT LIST

USB Charging Cable
Two way radios
User Manual

CHARGING THE RADIO
Follow these instructions to charge or recharge your radios. Make sure to turn the radio OFF before charging.

Using your smartphone adapter, connect the USB charging cable. Insert Charging USB plug to DC IN 5V USB jack of the radio and plug the other end into an AC outlet.
Make sure that the LED illuminates. Charge the batteries for 2~3 hours and remove the radio from the charging cradle after charging. (The LED is in Red when the battery is under charging. The LED is in Green when the charging is full.) This radio has a battery level meter that indicates the battery power level. When the battery level is low, the battery level meter icon flashes and then BATT appears after 30 seconds. Recharge the batteries immediately.

CHARGING THE RADIO
Note: Charge time may vary depending on the battery life remaining. If battery power is low, you cannot operate the radio even using external power. Allow the batteries to charge before using. If you try to transmit while power is low, the radio will automatically turn off. Charge time may vary depending on the battery life remaining.

CHARGING THE RADIO
Note : Charge time may vary depending on the battery life remaining. If battery power is low, you cannot operate the radio even using external power. Allow the batteries to charge before using. If you try to transmit while power is low, the radio will automatically turn off. Charge time may vary depending on the battery life remaining.

TURN ON/OFF THE DEVICE
SELECT THE MAIN CHANNEL

** Step 1:** Press the MENU once.
** Step 2** :MENU The main channel number is flashing.
** Step 3** :Press the up and down button to adjust the channel number (1~16).
Step 4: PTT Press the PTT to confirm the selected channel.

SELECT THE SUB CHANNEL

Step 1 :MENU Press the MENU twice.
Step 2 :The sub channel number is flashing.
Step 3 :Press the up and down but , to adjust the channel number(1~142).
Step 4 :Press the PTT to confirm the selected channel.

USING A HEADSET

****GT60 can support the 3.5mm headset with mic on the cord.
To use a headset, lift the rubber cover from over the headset jack, then plug in the headset.

TURN ON/OFF THE VOX FUNCTION

Step 1 :Press the MENU 3 times.
Step 2 :The OF is flashing
Step 3 :Press the up and down button
Step 4 :Press the PTT to confirm the sensitivity.

SETTING A CALL TONE

Step 1 : MENU Press the MENU 4 times.
Step 2 :The 01 is flashing.
Step 3 :Press the up and down button to select the call tone (1-10) OF means call tone OFF. PTT –
Step 4: Press the PTI to confirm the sensitivity.

BUTTON BEEP ON/OFF

Step 1 : MENU Press the MENU 5 times.
Step 2 :Press the up and down
**S tep 3:** The on is flashing. Press the up and down button to switch the on and of.
Step 4 : PTT Press the PTT to confirm.

ROGER BEEP ON/OFF

Step 1: Press the MENU 6 times
Step 2: The on is flashing
Step 3 :Press the up and down button to switch the on and of
** Step 4 :** PTT Press the PTT to confirm.

Volume Adjustment

****Press the up and down button to adjust the volume (1-8).

START A CONVERSATION

When the walkie-talkie is switched on and not being used for speech or papering, it is always T in the receiving mode. Press the PTT button, it will send conversation to other radio.

CHANNEL SCAN
Your radio has a channel scan feature that lets you easily scan all 16 channels. When an active channel is detected the radio pauses on that channel until the channel is clear. Then after a 2-second delay, the radio resumes scanning. Pressing PIT while the scan is paused on a channel lets you transmit on that channel. To turn on channel scan: Turn on the radio and short Press the SCAN. The channel number changes as the radio rapidly cycles through the channels.

KEY LOCK
Long press and hold the MENU until LOCK appears. | To turn Key lock off, long press and hold MENU again.
SENDING CALL
Make sure the call tone is on. And short press the button to send the calls to another radio.

OTHERS **

**

LAMP ON/OFF

Long press the button to ON/OFF LAMP the Lamp.
3.5mm Headset jack The radio can support most of smartphone headset on the market.
USB Charging It can support the USB direct charging.

ABOUT RANGE

You GT60 radios are designed to give you maximum range under optimum conditions.

Maximunm Range / Little to No Sight Obstruction
Medium Range / Partial Obstriction to Line of Sight
Short Range / Major Obstruction to Line of Sight
Optimum Conditions are:
- Over water
- Open rural areas without obstructions
- Flat areas where you can see the other person
Manufacturer : KOMVOX Technology CO.,
Limited Address: Shenzhen, Guangdong, China Email: service@comvox.com.cn Website: www.komvox.net