Connect IT CMH-2012-BK Wall Mount For Flat Screen User Manual
- June 13, 2024
- CONNECT IT
Table of Contents
Connect IT CMH-2012-BK Wall Mount For Flat Screen
WALL MOUNT FOR FLAT SCREEN CMH-20•2-BK
Before putting this product into operation, please read carefully all the
instructions, even if you are already familiar with using similar products.
Use the product only as described in this manual. Keep this manual in case you
need it for future reference.
The electronic version of this user manual can be downloaded on the website
www.cOMectit-europe.com.
We recommend keeping the original packaging of the product invoice and
warranty certificate at least for the time the warranty is valid. When
shipping the product we recommend using the original placekicking that the
product was delivered in that will provide the best protection for it from
being damaged during transport.
warning
- The wall or the surface used for securing the mount must have sufficient strength and maximum load to secure the weight of the mount, the screen and other accessories.
- When installing the screen, use an assistance of another person.
- During the installation, tighten the screws properly. but make su-e not to strip the threads. That could damage the installed screen or significantly decrease the maximum load of the mount.
- This wall mount is designed for indoor use only .Todor use macause harm, damage to the mount or the installed screen.
- Check the stability: and safety of the mount at least every three months.
Specifications
- colour : black
- quick and eased assembly
- screws and concrete anchors included
- full-motion wall mount
- fits most 13″ -37″ flat panels
- VESA 75×75, 100×100, 100×200, 200×200 mm compliant
- swivel 180°
- extend from : 56-308 mm
- max. load capacity: 25 kg
Package contents
Assembly
VESA plate installation
- MANUFACTURER
- HERSTELLER
- PROOUCENT
- VYROBCE
- VYROBCA
- IT TRADE, a.s.
- Brtnicka 1486/2
- 101 00 Praha 10-Michle Czech Republic
- tel.: +420 734 777 444
- [email protected]
- www.connectit-europe.com