greenworks PSCS06B01 7 Amp 2 In 1 10 inch Corded Electric Polesaw Instruction Manual

greenworks PSCS06B01 7 Amp 2 In 1 10 inch Corded Electric Polesaw

Product Information

Specifications

• Model: PSA803
• Product Type: Electric 2-in-1 Polesaw/Chainsaw
• Manufacturer: Greenworks
• Website: www.greenworkstools.com

Product Usage Instructions

1. Unpacking and Setup
   Follow these steps to set up your Electric 2-in-1 Polesaw/Chainsaw:

2. Unpack the machine carefully.

3. Add the bar and chain oil.

4. Assemble the guide bar and the chain.

5. Connect the poles.

6. Adjust the length of the polesaw.

7. Convert chainsaw to polesaw or vice versa as needed.

8. Prepare for cutting.

9. Operation
   Ensure safety precautions are followed before operating the equipment:

   • Always read and follow all safety warnings and instructions in the manual.
   • Do not allow children to operate the product
   • Do not operate without proper instruction.
   • Supervise children around the equipment.

10. Maintenance
    Regular maintenance is essential for optimal performance:

    • Adjust chain tension as needed.
    • Sharpen the cutters when dull.
    • Maintain the guide bar for smooth operation.

11. Transportation and Storage
    Properly store and transport the equipment to prolong its lifespan:

    • Follow guidelines for safe transportation and storage.
    • Avoid exposing the product to extreme conditions.

FAQ

1. Q: Can this product be used as a regular chainsaw?
   A: No, this product is specifically designed as a cutting implement mounted on a pole for cutting tree branches and is not intended for use as a regular chainsaw.

2. Q: Is this product safe for children to use?
   A: No, children should never operate this product and should always be supervised around it to prevent accidents.

ELECTRIC 2-IN-1 POLESAW/CHAINSAW OPERATOR MANUAL

www.greenworkstools.com

DESCRIPTION

PURPOSE
This product is a cutting implement mounted on a pole to enable the operator to cut the branches of standing trees. It is not intended for use as a regular chainsaw.
This appliance is not intended for use by persons with reduced understanding, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Never allow children to operate this product.
Never allow adults to operate this equipment without proper instruction.
Children should be supervised to ensure that they do not play with the appliance.

OVERVIEW

1. Chain
2. Bar
3. Chain Cover Knob
4. Chain Cover
5. Polesaw Head
6. Hand Guard
7. Rear Handle
8. Telescoping Shaft
9. Roller
10. Rear Handle
11. Cord Retainer
12. Power Supply
13. Trigger
14. Scabbard

GENERAL POWER TOOL SAFETY WARNINGS

WARNING
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool.
WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools.
• Unmodified plugs and matching outlets will reduce risk of electric shock. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges and moving parts. Damaged or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a RESIDUAL CURRENT DEVICE (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A lapse of attention while operating power tools may result in serious personal injury.
• Use personal protection. Always wear eye protection. Protective products such as dust mask, non-skid safety shoes, hard hat or hearing protection used appropriately will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/or battery pack and when picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
• Do not over-reach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust related hazards.
• Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

POWER TOOL USE AND CARE

• Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

SERVICE
Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

GENERAL SAFETY RULES

• Replacement Parts – When servicing use only identical replacement parts.

• Polarized Appliance Connections – To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other) and will require the use of a polarized extension cord. The appliance plug will fit into a polarized extension cord only one way. If the plug does not fit fully into the extension cord, reverse the plug. If the plug still does not fit, obtain a correct polarized extension cord. A polarized extension cord will require the use of a polarized wall outlet. This plug will fit into the polarized wall outlet only one way. If the plug does not fit fully into the wall outlet, reverse the plug. If the plug still does not fit, contact a qualified electrician to install the proper wall outlet. Do not change the equipment plug, extension cord receptacle, or extension cord plug in any way.

• Avoid Dangerous Environment – Don’t use appliances in damp or wet locations.

• Don’t Use In Rain.

• Keep Children Away – All visitors should be kept at a distance from work area.

• Dress Properly – Do not wear loose clothing or jewelry. They can be caught in moving parts. Use of rubber gloves and substantial footwear is recommended when working outdoors. Wear protective hair covering to contain long hair.

• Use Safety Glasses – Always use face or dust mask if operation is dusty.

• Use Right Appliance – Do not use appliance for any job except that for which it is intended.

• Warning – To reduce the risk of electric shock, use only with an extension cord intended for outdoor use, such as an extension cord of cord type SW-A, SOW-A, STW-A, STOW-A, SJW-A, SJOW-A,   SJTW-A. or SJTOW-A.

• Avoid Unintentional Starting – Don’t carry plugged-in appliance with finger on switch. Be sure switch is off when plugging in.

• Don’t Abuse Cord – Never carry appliance by cord or yank it to disconnect from receptacle. Keep cord from heat, oil, and sharp edges.

• Don’t grasp the exposed cutting blades or cutting edges when picking up or holding the appliance.

• Don’t Force Appliance – It will do the job better and with less likelihood of a risk of injury at the rate for which it was designed.

• Don’t Overreach – Keep proper footing and balance at all times.

• Stay Alert – Watch what you are doing. Use common sense. Do not operate appliance when you are tired.

• Disconnect Appliance – Disconnect the appliance from the power supply when not in use, before servicing, when changing accessories such as blades, and the like.
  Store Idle Appliances Indoors – When not in use, appliances should be stored indoors in dry, and high or locked-up place – out of reach of children.

• Maintain Appliance With Care – Keep cutting edge sharp and clean for best performance and to reduce the risk of injury. Follow instructions for lubricating and changing accessories. Inspect appliance cord periodically, and if damaged, have it repaired by an authorized service facility. Inspect extension cords periodically and replace if damaged. Keep handles dry, clean, and free from oil and grease.

• Check Damaged Parts – Before further use of the appliance, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other condition that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless indicated elsewhere in this manual.

POLE SAW SAFETY WARNINGS

• Keep all parts of the body away from the saw chain. Do not remove cut material or hold material to be cut when blades are moving. Make sure the switch is off when clearing jammed material. Saw chain continues to move after the switch is turned off. A moment of inattention while operating the pole saw may result in serious personal injury.
• Carry the pole saw by the handle with the saw chain stopped. When transporting or storing the pole saw, always fit the saw chain device cover. Proper handling of the pole saw will reduce possible personal injury from the saw chain.
• Hold the pole saw by insulated gripping surfaces only, because the saw chain may contact hidden wiring or its own cord. A saw chain contacting a ″live″ wire may make exposed metal parts of the pole saw ″live″ and could give the operator an electric shock.
• Keep cable away from cutting area. During operation the cable may be hidden in shrubs and can be accidentally cut by the saw chain.
• Do not use the pole saw in bad weather conditions, especially when there is a risk of lightning. This decreases the risk of being struck by lightning.
• To reduce the risk of electrocution, never use near any electrical power lines. Contact with or use near power lines may cause serious injury or electric shock resulting in death.
• Always use two hands when operating the pole saw. Hold the pole saw with both hands to avoid loss of control.
• Always use head protection when operating the pole saw overhead. Falling debris can result in serious personal injury.

CHAINSAW SAFETY WARNINGS

• Keep all parts of the body away from the saw chain when the chainsaw is operating. Before you start the chainsaw, make sure the saw chain is not in contact with anything. A moment of inattention while operating chainsaws may cause entanglement of your clothing or body with the saw chain.
• Always hold the chainsaw with your right hand at the rear handle and your left hand at the front handle. Holding the chainsaw with a reversed hand configuration increases the risk of personal injury and should never be done.
• Hold the power tool by insulated gripping surfaces only, because the saw chain may contact hidden wiring. Saw chains contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
• Wear safety glasses and hearing protection. Further protective product for head, hands, legs and feet is recommended. Adequate protective clothing will reduce personal injury from flying debris or accidental contact with the saw chain.
• Do not operate a chainsaw in a tree. Operation of a chainsaw while up in a tree may result in personal injury.
• Always keep proper footing and operate the chainsaw only when standing on fixed, secure and level surface. Slippery or unstable surfaces such as ladders may cause loss of balance or control of the chainsaw.
• When cutting a limb that is under tension, be alert of spring back. When the tension in the wood is released, the spring loaded limb may strike the operator and/or throw the chainsaw out of control.
• Use extreme caution when cutting brush and saplings. The slender material may catch the saw chain and be whipped toward you or pull you off balance.
• Carry the chainsaw by the front handle with the chainsaw switched off and away from your body. When transporting or storing the chainsaw, always fit the guide bar cover. Proper handling of the chainsaw will reduce the likelihood of accidental contact with the moving saw chain.
• Follow instructions for lubricating, chain tensioning and changing accessories. Improperly tensioned or lubricated chain may either break or increase the chance for kickback.
• Keep handles dry, clean, and free from oil and grease. Greasy, oily handles are slippery, causing loss of control. Cut wood only. Do not use chainsaw for purposes not intended. For example: do not use chainsaw for cutting plastic, masonry or non-wood building materials. Use of the chainsaw for operations other than intended could result in a hazardous situation.

PREVENT OPERATOR KICKBACK

• Kickback may occur when the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut.
• Tip contact in some cases may cause a sudden reverse reaction, kicking the guide bar up and back towards the operator.
• Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back towards the operator.
• Either of these reactions may cause you to lose control of the saw which could result in serious personal injury. Do not rely exclusively upon the safety devices built into your saw. As a chainsaw user, you should take several steps to keep your cutting jobs free from accident or injury.
• Kickback is the result of tool misuse and/or incorrect operating procedures or conditions and can be avoided by taking proper precautions as given below:
  • Maintain a firm grip, with thumbs and fingers encircling the chainsaw handles, with both hands on the saw and your body and arm positioned to allow you to resist kickback forces.
  • Kickback forces can be controlled by the operator, if proper precautions are taken. Do not let go of the chainsaw.
  • Do not overreach and do not cut above shoulder height. This helps prevent unintended tip contact and enables better control of the chainsaw in unexpected situations.
  • Only use replacement bars and chains specified by the manufacturer. Incorrect replacement bars and chains may cause chain breakage and/or kickback.
  • Follow the manufacturer’s sharpening and maintenance instructions for the saw chain. Decreasing the depth gauge height can lead to increased kickback.

SYMBOLS ON THE PRODUCT

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.

RISK LEVELS
The following signal words and meanings are intended to explain the levels of risk associated with this product.

will result in death or serious injury.
SYM- BOL| SIGNAL| MEANING
---|---|---
| WARNING| Indicates a potentially hazard- ous situation,which, if not avoided, could result in death or serious injury.
| CAUTION| Indicates a potentially hazard- ous situation, which, if not avoided, may result in minor or moderate injury.
| CAUTION| (Without Safety Alert Symbol) Indicates a situation that may result in property dam- age.

DOUBLE INSULATED

• Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual threewire grounded power cord. All exposed metal parts are isolated from the internal metal motor components with protecting insulation. Double insulated tools do not need to be grounded.
• WARNING
  • The double insulated system is intended to protect the user from shock resulting from a break in the tool’s internal insulation. Observe all normal safety precautions to avoid electrical shock.
• NOTE
  • Servicing of a product with double insulation requires extreme care and knowledge of the system and should be performed only by a qualified service technician. For service, we suggest you return the tool to your nearest authorized service center for repair. Always use original factory replacement parts when servicing.

EXTENTION CORDS

• When using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to handle the current the product will draw. An undersized cord will cause a drop in line voltage, resulting in overheating and loss of power. Use the chart to determine the minimum wire size required in an extension cord. Only round jacketed cords listed by Underwriter’s
• Laboratories (UL) should be used.
• When working outdoors with a product , use an extension cord that is designed for outside use. This type of cord is designated with “W-A” or “W” on the cord’s jacket. Before using any extension cord,  inspect it for loose or exposed wires and cut or worn insulation.

MINIMUM GAUGE FOR EXTENSION CORDS (AWG)(WHEN USING 120 V ONLY)

m)

| 50′ (15

m)

| 100′

(30.4 m)

| 150′

(45.7 m)

0| 6| 18| 16| 16| 14
6| 10| 18| 16| 14| 12
10| 12| 16| 16| 14| 12
12| 16| 14| 12| Not Recommended

Extension Cord – Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized extension cord will cause a drop in voltage resulting in loss of power and overheating. The table shows the correct size to use depending on cord length and name plate ampere rating. If in doubt, use the next heavier  gauge. The smaller the gauge number, the heavier the cord. To reduce the risk of disconnection of appliance cord from the extension cord during operating:

1. Make a knot as shown in Figure A. or
2. Use one of the plug-receptacle retaining straps or connectors.

METHOD OF SECURING EXTENSION CORD

• WARNING
  • Keep the extension cord clear of the working area. Position the cord so that it will not get caught on lumber, tools, or other obstructions while you are working with a power tool. Failure to do so can result in serious personal injury.
• WARNING
  • Check extension cords before each use. If damaged replace immediately. Never use the product with a damaged cord since touching the damaged area could cause electrical shock resulting in serious injury.

11 PROPOSITION 65

WARNING
This product contains a chemical known to the state of California to cause cancer, birth defects or other reproductive harm. Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

• Lead from lead-based paints;
• Crystalline silica from bricks and cement and other masonry products;
• Arsenic and chromium from chemically treated lumber.

Your risk of exposure to these chemicals varies depending on how often you do this type of work. To reduce your exposure to these chemicals, work in a well- ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

Save these instructions.

INSTALLATION

UNPACK THE MACHINE

• WARNING
  • Make sure that you correctly assemble the machine before use.

WARNING

• If the parts are damaged, do not use the machine.

• If you do not have all the parts, do not operate the machine.

• If the parts are damaged or missing, speak to the service center.

  1. Open the package.
  2. Read the documentation in the box.
  3. Remove all the unassembled parts from the box.
  4. Remove the machine from the box.
  5. Discard the box and package in compliance with local regulations.

ADD THE BAR AND CHAIN OIL
Examine the amount of oil in the machine. If the oil level is low, add the bar and chain oil as follows.

• IMPORTANT
  • Use bar and chain oil that is only for chains and chain oilers.
• NOTE
  • The machine comes from the factory without bar and chain oil.

1. Loosen and remove the cap (40) from the oil tank.
2. Put the oil into the oil tank.
3. Monitor the oil indicator to make sure that no dirt gets into the oil tank while you add the oil.
4. Put the oil cap on.
5. Tighten the oil cap.
6. The whole oil tank will last for approximately 20- 40 minutes.

IMPORTANT
Do not use dirty, used or contaminated oil. Damage can occur to the bar or chain.

ASSEMBLE THE GUIDE BAR AND  THE CHAIN

1. Loosen the chain cover by turning the chain cover knob (3) counterclockwise.
2. Remove the chain cover (4).
3. Put the chain drive links (21) into the bar groove (20).
4. Put the chain cutters (22) in the direction of the chain operation.
5. Put the chain in position and make sure that the loop is behind the guide bar.
6. Hold the chain and bar.
7. Put the chain loop around the sprocket (17).
8. Make sure the chain tension pin hole (19) on the guide bar fits correctly with the bolt (18).
9. Install the chain cover.
10. Tighten the chain. Refer to Adjust the chain tension.
11. Tighten the chain cover knob when the chain is correctly tensioned.

NOTE
If you start the chain saw with a new chain, have a test for 2-3 minutes. A new chain gets longer after the first use, examine the tension and tighten the chain if necessary.

CONNECT THE POLES

1. Insert the intermediate pole into the rear handle.
2. Tighten screws with screwdriver (not included).

ADJUST THE LENGTH OF THE POLESAW

1. Loose the collar (9) by turning it counterclockwise.
2. Pull / Push the telescoping shaft (8) to adjust the length of the polesaw.
3. Turn the collar clockwise to tight it.

CONVERT CHAINSAW TO  POLESAW

1. Lift the quick release latch (16) and cover at the bottom of the chainsaw.
2. Insert the telescoping shaft to the chainsaw.

CONVERT POLESAW TO  CHAINSAW

1. Lift the quick release latch (16) and cover at the bottom of the chainsaw.
2. Pull to remove the telescoping shaft from the chainsaw.

CUTTING PREPARATION
Before you start to cut, make sure that

• Wear heavy gloves for maximum grip and protection.
  • Maintain a proper grip on the machine during operation.
  • Use your right hand grip on the rear handle while your left hand grip on the pole shaft.
• Keep your body to the left of the chain line. Never use a left-handed (cross-handed) grip, or any stance that places your body or arm across the chain line.
  • Never stand directly under the limb you are cutting.
  • Periodically examine the tightness of the collars during operation.

 OPERATION

• WARNING
  • Before you plug in, examine if the rated mains voltage and mains frequency, as tell on the rating label, match your power supply.
• WARNING
  • Before operation, examine if the mains connection cable and extension cable have damage. Only use the mains connection cables and extension cables in good condition.
• IMPORTANT
  • Examine the chain tension before each use.
  • It is recommended to use the cord retainer in the rear handle to prevent accidental disconnection of the power supply.

EXAMINE THE CHAIN OIL

NOTE
Do not use the machine without sufficient chain oil.

1. Examine the oil level of the machine from the oil indicator.
2. Add the oil if it is necessary.

START THE MACHINE

1. Press the lock-out button (15).
2. Press the trigger (13) while you hold the lock-out button.
3. Release the lock-out button.

STOP THE MACHINE

1. Release the trigger to stop the machine.

FELL A TREE

Recommendation that the first-time user should, as a minimum practice, start cutting logs on a saw-horse or cradle.
Before you start to fell a tree, make sure that

• The minimum distance between the areas of bucking and felling is two times the height of the tree.
• The operation does not
• Cause injury to personnel.
• Hit utility lines. If the tree touches utility lines, immediately tell the utility company.
• Cause losses in property.
• The user is not in the danger area (24), for example, the downhill side of the area.
• The escape paths (25) that extend back and diagonally behind the felling direction (23) are clear. The felling direction is controlled by
• The natural lean of the tree.
• The location of larger branches.
• The wind direction.
• Ensure there is no dirt, stones, loose bark, nails, and staples on the tree.

1.  Make a lower level notching cut (27). Make sure that this cut is

   • 1/3 wide of the diameter of the tree.
   • Perpendicular to the felling direction.
   • CAUTION
     The level notching cut helps prevent pinching of the saw chain or the guide bar when you make the second notch.
     

2. Make the felling cut no less than 2 in. (50 mm) and higher than the level notching cut. Make sure that this cut

   • Is parallel to the level notching cut.

   • Keeps sufficient wood to become a hinge (29) which prevents the tree from twisting and felling in the wrong direction.
     When the felling cut (28) gets near the hinge (29), the tree falls. Stop the felling cut if the tree

   • Does not fall in the correct direction or

   •  Moves backwards, causing the cutting bar and chain to become stuck in the cut.

3. Use felling wedge to open the cut and let the tree fall in the correct direction.

4. When the tree starts to fall,

   • Remove the chainsaw from the cut.
   • Stop the machine.
   • Put the machine down.
   • Move away from the tree via the escape path (25). Always keep watching the tree to see it’s direction of fall, be careful with overhead branches and your footing.

LIMB A TREE
Limbing is the removal of the branches from a fallen tree.

1. Keep the larger lower branches to hold the log off the ground (31).
2. Remove the small limbs (30) in one cut.
3. Limb the branches with tension from the bottom to top.
4. Keep the larger lower branches as a support until the log is limbed.

BUCK A LOG
To buck is to cut a log into lengths.

CAUTION
Do not let the chain saw touch the ground.
It is important to make sure your footing is secure and your weight is evenly distributed. If possible, lift the log and hold it with branches, logs or chock. Obey the instructions below:

When the log is held along the full length (32), cut it from the top (33).

When the log is held on one end (34),

1. Cut the first time 1/3 of the diameter from the bottom (35).
2. Cut the second time from the top (36) to complete the bucking.

When the log is held on two ends (37),

1. Cut the first time 1/3 of the diameter from the top (36).
2. Cut the second time lower 2/3 from the bottom to complete the bucking (35).

When the log is on a slope,

1. Stand on the uphill side.
2. Control the chain saw completely.
3. Hold the chain saw handles tightly.
4. Release the cutting pressure near the end of the cut.

When bucking is complete (38),

1. Wait for the chain to stop (39).
2. Ensure the chainsaw is turned off.
3. Check for hazards before you move to another tree.

DELIMBING A TREE

WARNING
Make sure that there is nothing or nobody in the area where the branches fall.

• Stand opposite the branch you will cut.
• Start to cut the higher branches.
• Then cut the lower branches.
• Cut downwards to prevent the bar from jamming.

LIMB TREE BRANCHES
Limbing is to remove the branches from a fallen tree.

1. Keep the larger lower branches to hold the log off the ground.
2. Remove the small limbs in one cut.
3. Limb the branches with tension from the bottom to up.
4. Keep the larger lower branches as a support until the log is limbed.

MAINTENANCE

• CAUTION
  Do not let brake fluids, gasoline, petroleum-based materials touch the plastic parts. Chemicals can cause damage to the plastic, and make the plastic unserviceable.

• CAUTION
  Do not use strong solvents or detergents on the plastic housing or components.

• WARNING
  Pull the mains plug out of the socket before maintenance.

ADJUST THE CHAIN TENSION

CAUTION

1. Loosen the chain cover by turning the chain cover knob counterclockwise.
   NOTE
   It is not necessary to remove the chain cover to adjust the chain tension.

2. Turn the chain tension screw (41) behind the bar and chain clockwise to increase the chain tension.

3. Turn the chain tension screw counterclockwise to decrease the chain tension.

4. When the chain is at the desired tension, tighten the chain  cover.

SHARPEN THE CUTTERS
Sharpen the cutters if it is not easy for the chain to go into the wood.

NOTE
We recommend that a service center, which has an electric sharpener, perform important sharpening work.

1. Tensioning chain.
2. Sharpen the cutters corner with a 5/32 in. (4 mm) diameter round file .
3. Sharpen the top plate, side plate and depth gauge with a flat file.
4. File all the cutters to the specified angles and the same length.

NOTE
During the process,

• Keep the file flat with the surface to be sharpened.
• Use the midpoint of the file bar.
• Use light but firm pressure when sharpening the surface.
• Lift the file away on each return stroke.
• Sharpen the cutters on one side and then move to the other side.

Replace the chain if:

• The length of the cutting edges is less than 1/5 in. (5 mm).
• There is too much space between the drive links and the rivets.
• The cut speed is slow
• Sharpening the chain many times but it does not increase the cutting speed. The chain is worn.

GUIDE BAR MAINTENANCE

NOTE
Make sure that it is turned over periodically to keep symmetrical wear on the bar.

1. Lubricate the bearings on the nose sprocket (if present) with the syringe (not included).

2. Clean the bar groove with the scraping hook (not included).

3. Clean the lubrication holes.

4. Remove burr from the edges and level the cutters with a flat file.
   Replace the bar if:

   • the groove does not fit with the height of the drive links (which must never touch the bottom).
   • the inside of the guide bar is worn and makes the chain lean to one side.

TRANSPORTATION AND  STORAGE

Before you move the machine, always

• Pull the mains plug out of the socket.
• Keep hands clear of the lock-out button.
• Put the scabbard on the guide bar and the chain. Before you put the machine into storage, always
• Pull the mains plug out of the socket.
• Clean all unwanted material from the machine.
• Make sure that the storage area is
• Not available to children.
• Away from agents which can cause corrosion, such as garden chemicals and de-icing salts.

TROUBLESHOOTING

the poles according to the instructions.
| |  Push and hold the lock-out button
| ****

The lock-out but- ton and trigger are not depressed at the same time.

|  While you hold the lock- out button, pull the trigger.
| |  Release the lock-out but- ton to start the machine.
The bar and chain gets hot and smokes.| Oil tank is empty.| Fill the oil tank.

The discharge port is blocked.

|

1. Remove from power supply.
2. Remove dirt from the dis- charge port.

| ****

Inlet opening of inner oil tank is blocked.

|

1. Clean the oil tank.
2. Fill with clean bar and chain lubricant.

| The sprocket is stuck and clogged with debris.|

1. Clean the sprocket.
2. Fill with clean bar and chain lubricant.

The bar and chain gets too hot and can not cut.| The chain tension is too tight or too loose.| Refer to Adjust the Chain Tension in the manual.
The chain is dull| Sharpen or re- place the chain.
The chain is put on backwards.| Take out the chain and turn it in the right direction.
Problem| Possible cause| Solution
---|---|---
The motor runs, but the chain does not cut correctly, or the motor stops after around 3 seconds.| When you use the machine under load, it stops.|

1. Release the trigger.
2. Start the ma- chine again.

The chain is not lubricated.| Lubricate the chain to decrease the friction.

TECHNICAL DATA

• 140MLEA041/
• 100NDEA041

LIMITED WARRANTY

Greenworks hereby warranties this product, to the original purchaser with proof of purchase, for a period of three (3) years against defects in materials, parts or workmanship. Greenworks, at its own discretion will repair or replace any and all parts found to be defective, through normal use, free of charge to the customer. This warranty is valid only for units which have been used for personal use that have not been hired or rented for industrial/commercial use, and that have been maintained in accordance with the instructions in the owners’ manual supplied with the product from new.
ITEMS NOT COVERED BY WARRANTY:

1. Any part that has become inoperative due to misuse, commercial use, abuse, neglect, accident, improper maintenance, or alteration; or
2. The unit, if it has not been operated and/or maintained in accordance with the owner’s manual; or
3. Normal wear, except as noted below;
4. Routine maintenance items such as lubricants, blade sharpening;
5.  Normal deterioration of the exterior finish due to use or exposure.

HELPLINE:
Warranty service is available by calling our toll-free helpline, at 1-888-909-6757.
TRANSPORTATION CHARGES:
Transportation charges for the movement of any power equipment unit or attachment are the responsibility of the purchaser. It is the purchaser’s responsibility to pay transportation charges for any part submitted for replacement under this warranty unless such return is requested in writing by Greenworks.

• USA address : Canadian address:
• Greenworks Tools Greenworks Tools Canada Inc.
• P.O. Box 1238 1110 Stellar Drive Unit 102
• Mooresville, NC 28115 Newmarket, ON, L3Y 7B7

EXPLODED VIEW

No

.

| Part No.| Qty| Description| No

.

| Part No.| Qty| Description
---|---|---|---|---|---|---|---
1| R0201648-00| 1| Bar| 5| RB34114155V1| 1| Scabbard
2| R0201649-00| 1| Side Cover Assembly| 6| R0201652-00| 1| Chain
3| R0201650-00| 1| Sprocket Kit| 7| R0201653-00| 1| Polesaw Handle Assembly
4| R0201651-00| 1| Oil Cap Assembly| 8| R0200050-00| 1| Tension Block Assembly

References

• Greenworks Outdoor Power Equipment, Lawn & Garden Tools

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>