greenworks 29842 G-24V Lithium-Ion Rechargeable Battery and Charger Owner’s Manual
- October 30, 2023
- Greenworks
Table of Contents
29842 G-24V Lithium-Ion Rechargeable Battery and Charger
Owner’s Manual
Read all safety rules and instructions carefully before operating this tool.
SPECIFICATIONS
29842
Battery: 24V, 43Wh
Charge time: 100 min.(use 29862 Charger)
Weight: 0.45kg| 29852
Battery: 24V, 86Wh
Charge time: 180 min.(use 29862 Charger)
Weight: 0.72kg
---|---
For the proper use, maintenance and storage of this battery, it is crucially
important that you read and understand the instructions given in this manual.
To avoid serious injury, risk of fire, explosion and danger of electric shock
or electrocution:
- DO NOT probe the charger with conductive materials. The charging terminals hold 120 V.
- If the battery pack case is cracked or damaged, DO NOT insert into the charger. Replace the battery pack.
- DO NOT charge these battery packs with any other type of charger.
- DO NOT allow liquid inside the charger.
- DO NOT try to use the charger for any other purpose than what is presented in this manual.
WARNING
If the battery fluid gets in your eyes, flush immediately with clean water for
at least 15 minutes. Get immediate medical attention. Do not charge the
battery pack in rain or in wet conditions. Do not immerse the tool, battery
pack, or charger in water or other liquid.
- Do not allow the battery pack or charger to overheat. If they are warm, allow them to cool down. Recharge only at room temperature.
- Do not cover the ventilation slots on the top of the charger. Do not set the charger on a soft surface. Keep the ventilation slots of the charger clear.
- Do not allow small metal items or material such as steel wool, aluminum foil, or other foreign particles into the charger cavity.
- Unplug the charger before cleaning and when there is no battery pack in the cavity.
- Do not place the battery pack in the sun or in a warm environment. Keep at normal room temperature.
- Do not try to connect two chargers together.
- Keep in shady, cool and dry condition if battery not work for a long time, and charge the battery in 2 hours per 2 months.
- The battery pack cells may develop a small leak under extreme usage or temperature conditions. If the outer seal is broken and the leakage gets on your skin:
- Use soap and water to wash immediately.
- Neutralize with lemon juice, vinegar, or other
- Risk of fire and burns. Do not open, crush, expose to heat above 100°C(212°F) or Incinerate. mild acid.
CHECKING BATTERY CAPACITY
Press the battery capacity indicator (BCI) button. The lights will illuminate according to the batteries current power level. See chart below:
| Lights | Capacity |
|---|---|
| 3 Green Lights | The battery is at 80-100% capacity |
| 2 Green Lights | The battery is at 50-80% capacity |
| 1 Green Light | The battery is at 20-50% capacity |
| Lights go out | The battery is under 10% capacity and requires charging |
immediately
SAFETY NOTES AND PRECAUTIONS
- Do not disassemble the battery.
- Keep away from the children.
- Do not expose the battery to water or salt water, and should place the battery in cool and dry environment.
- Do not place the battery in high-temperature locations, such as fire, heater, etc.
- Do not reverse the positive terminal and the negative terminal of the battery.
- Do not connect the positive terminal and the negative terminal of the battery to each other with any metal objects.
- Do not knock, strike, step on the battery.
- Do not solder directly onto the battery and pierce the battery with nails or other edge tools.
- In the event that the battery leaks and the fluid gets into one’s eye, do not rub the eye. Rinse well with water. Immediately discontinue use of the battery, if, while the battery emits an unusual smell, feels hot, changes color, changes shape, or appears abnormal in any other way.
WARNING
To avoid risk of fire, electric shock, or electrocution:
- Do not use a damp cloth or detergent on the battery or battery charger.
- Always remove the battery pack before cleaning, inspecting, or performing any maintenance on the tool.
CLEANING
- Wipe the outside of the tool with a dry, soft cloth. Do not hose down or wash with water.
- Scrape the guard and spool area to remove dried clippings and mud.
- Brush or blow dust, debris, and grass clippings out ofthe air vents. Keep them free of obstruction.
TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.6757)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>