greenworks 2601402 40V Cordless Snow Shovel User Manual

greenworks 2601402 40V Cordless Snow Shovel

Specifications

• Product Name: 40V Cordless Snow Shovel
• Model Number: 2601402
• Power: 40V
• Compatible Battery: Greenworks 40V Battery (Model#: 29472 and other BAF series)
• Compatible Charger: Greenworks 40V Charger (Model#: 29482 and other CAF series)

Safety Information
Before operating the 40V Cordless Snow Shovel, carefully read and understand all safety rules and instructions provided in the owner’s manual.

Battery Usage

1. Use only Greenworks approved replacement batteries to avoid injury or damage to the snow shovel.
2. Ensure to use the recommended Greenworks 40V Battery and Charger for optimal performance.
3. When not in use, remove the battery from the machine to prevent accidental activation.

Safety Symbols
It’s important to understand the symbols on the product for safe operation:

• V: Voltage
• A: Current
• RPM: Revolutions per minute

Risk Levels
The product uses specific signal words to indicate risk levels:

• DANGER: Indicates an imminently hazardous situation leading to death or serious injury.
• WARNING: Indicates a potentially hazardous situation that could result in death or serious injury.

FAQ (Frequently Asked Questions)

1. Q: Can I use a different brand of battery with the snow shovel?
   A: No, it is highly recommended to use only Greenworks-approved replacement batteries to prevent injury or damage.

PRODUCT SPECIFICATIONS

12″ 40V CORDLESS SNOW SHOVEL

• Motor ……………………………………………………………………………………… 40 V Brushless Motor
• Battery Type……………………………………………………………………………………… 40 V Lithium-ion
• No-load Speed ………………………………………………………………………………………….1800 RPM
• Clearing Width………………………………………………………………………………………….12 in. (30 cm)
• Clearing Depth……………………………………………………………………………………… 6 in. (15.2 cm)
• Impeller Size………………………………………………………………………………………….11 in. (27.8 cm)
• Discharge Distance…………………………………………………………………………………. 20 ft. (6 m)
• Weight (with battery) ………………………………………………………………………….18.3 lbs (8.3 kg)

Cold Weather Operation: Lithium Ion batteries can be safely used from temperatures ranging from -17 degrees to 45 degrees Celsius. NOTE: Do not store or charge battery outside. Battery must be charged and stored indoors prior to use of the snow shovel.
Battery may not properly start if its temperatures is -17˚C or lower. If unit does not start remove battery from snow shovel. Place battery on charger and allow to charge for 10 minutes to allow battery to warm. Remove from charger and install in snow shovel for use.

SAFETY INFORMATION

FOLLOW THESE RULES WHILE OPERATING (THE POWER TOOL)

WARNING
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.

•  Walk. Do not run.

• Verify that the power tool is not in contact with anything before turning it on.

• Stay away from impeller openings at all times. Keep face, hands, and feet away from concealed, moving, or rotating parts.

• Be attentive when using the power tool. Stay alert for holes in the terrain and other hidden hazards or traffic.

• Move up and down slopes when clearing snow. Do not go across a slope. Use caution when changing direction. Do not use this power tool to clear snow from steep slopes.

• Do not operate the power tool if the guards, plates, and other safety protective devices are not in place.

• Do not operate the power tool near glass enclosures, automobiles, trucks, window wells, drop-offs, etc., without properly adjusting the angle of the snow discharge. Keep children and pets away from the work area.

• Do not operate the power tool at high speeds on slippery surfaces. Look behind when backing up and exercise caution.

• Wear safety glasses or goggles that meet ANSI Z87.1 standards.

• Use the power tool in daylight or in good artificial light.

• To avoid accidental start-ups, remain in the starting position when turning the power tool on. The operator and the power tool must be in a stable position during start-up. See the section titled Starting/Stopping Instructions.

• Use this power tool only for the purposes it was designed.

• Hold the power tool with both hands while it is in use. Keep a firm grip on the handles.

• If the impeller does not rotate freely due to ice, thaw the power tool thoroughly before attempting to use it.

• Keep the impeller clear of debris.

• Do not attempt to clear the impeller while the motor is running.

• After striking a foreign object, turn the power tool off and remove the battery pack, then inspect it for damage. Repair any damage before restarting and using the power tool.

• If the power tool starts to vibrate abnormally, stop the power tool immediately and attempt to determine the cause. Vibration is generally an indication of danger.

• Stop the motor and remove the battery pack whenever the operator is not in the operating position, before unclogging the impeller, and before making any repairs, adjustments, or inspections.

• Do not use on graveled surface unless the power tool is adjusted for such a surface in accordance with the operator’s manual.

• Keep Children Away – All visitors should be kept a safe distance from work area.

• Dress Properly – Do not wear loose clothing or jewelry. They can be caught in moving parts.

• Wear rubber boots when operating the power tool. Do not operate the equipment when barefoot or wearing open sandals. Always wear substantial footwear.

• Operation of the power tool in the hand-held position is unsafe, except in accordance with the special instructions for such use provided in the operator’s manual.

• Keep guards in place and in working order.

• Don’t Force Power Tool – It will perform better and safer at the rate for which it was designed.

• Don’t Overreach – Keep proper footing and balance at all times.

• If the power tool strikes a foreign object, follow these steps:

  1. Stop the power tool.
  2. Inspect for damage.
  3. Repair any damage before restarting and operating the power tool.

• Store Idle Power Tool Indoors – When not in use, power tools should be stored indoors in a dry, locked-up place out of reach of children.

• Maintain Power Tools With Care – Follow instructions for lubricating and changing accessories.

• Allow the power tool to run for a few minutes after clearing snow in order to prevent moving parts from freezing.

• Only use identical replacement parts and accessories for this power tool. The use of nonidentical parts or accessories could lead to serious injury to the user or damage the power tool, and will void the warranty.

• Do not pick up the power tool while it is running. The power tool is designed to travel along the ground.

• Never allow children to operate a power tool. Keep the area of operation clear of all persons, particularly small children, and pets.

• Thoroughly inspect the area where the equipment is to be used and remove all stones, sticks, wires, bones, and other foreign objects.

• Stop the blade(s) when crossing gravel drives, walks, or roads.

• Read the operating and service instruction manual carefully. Be thoroughly familiar with the controls and the proper use of the equipment.
  GENERAL SAFETY RULES

• Verify that the power tool is secure while transporting.

• Store the power tool in a dry area that will prevent unauthorized use or damage. Keep out of the reach of children.

• Keep handles dry, clean, and free of debris. Clean the power tool after each use. Refer to the Maintenance Section in this manual for more information.

• If the labels on the power tool become defaced or start to lift off, contact the toll-free helpline, at 1-888-909-6757.

• Keep these instructions in a safe place for future reference. Refer to them often and use them to instruct other users. Anyone who uses this power tool must read these instructions carefully.

• Maintain the power tool with care. Follow the instructions for lubricating and changing accessories.

CAUTION
USE ONLY GREENWORKS APPROVED REPLACEMENT BATTERIES, OTHER BATTERIES MAY CAUSE INJURY OR DAMAGE TO THE SNOW SHOVEL. USE ONLY WITH GREENWORKS 40V BATTERY (Model#: 29472 and other BAF series) and GREENWORKS 40V CHARGER (Model#: 29482 and other CAF series).

WARNING (PROPOSITION65

This product contains a chemical known to the state of California to cause cancer, birth defects or other reproductive harm.
Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

• Lead from lead-based paints,
• Crystalline silica from bricks and cement and other masonry products, and
• Arsenic and chromium from chemically treated lumber.

Your risk of exposure to these chemicals varies depending on how often you do this type of work. To reduce your exposure to these chemicals, work in a well- ventilated area, and work with approved safety equipment, such as dust masks that are specially particles.

SAVE THESE INSTRUCTIONS

SYMBOLS

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.

SYMBOLS
The following signal words and meanings are intended to explain the levels of risk associated with this product.

DANGER

| Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury.

WARNING

| Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.

CAUTION

| Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.

CAUTION

| (Without Safety Alert Symbol) Indicates a situation that may result in property damage.

SERVICE
Servicing requires extreme care and knowledge and should be performed only by a qualified
service technician. For service we suggest you return the product to your nearest AUTHORIZED SERVICE CENTER for repair. When servicing, use only identical replacement parts.

WARNING
To avoid serious personal injury, do not attempt to use this product until you have read this Owner’s Manual thoroughly and understand it completely. If you do not understand the warnings and instructions in this Owner’s Manual, do not use this product. Call the Toll-free Helpline (1-888-909-6757) for assistance.

WARNING

The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and, when needed, a full face shield. We recommend a Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1.

KNOW YOUR SNOW SHOVEL

Read this operator’s manual and safety rules before operating your snow shovel. Compare the illustration in Figure 1 to your snow shovel in order to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.

ASSEMBLY INSTRUCTIONS

UNPACKING

• Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included.
• Inspect the product carefully to make sure no breakage or damage occurred during shipping.
• Do not discard the packing material until you have carefully inspected and satisfactorily operated the product.
• If any parts are damaged or missing, please call 1-888-909-6757 for assistance.

WARNING
If any parts are damaged or missing, do not operate this product until the parts are replaced. Failure to heed this warning could result in serious personal injury.

WARNING
Do not insert battery until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury.

WARNING
Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse, and could result in a hazardous condition leading to possible serious personal injury.

CONNECTING THE SHAFTS (See Figures 2-3)

• Align the pin on the handle shaft and the hole on the lower shaft. (Fig. 2)
• Once the two shafts are secured, turn the lock knob clockwise until it is fully tightened. (Fig. 3)

TO INSTALL BATTERY PACK (See Figure 4)

• Slide the battery (1) down to lock it into position. The battery is fully inserted into the snow shovel when you hear an audible “click”.

TO REMOVE BATTERY PACK (See Figure 5)

• Release the trigger switch. The lock-out button will pop out, and the snow shovel will stop.
• Press and hold the battery latch button (2) at the top of the battery pack.
• Remove battery pack from the snow shovel.

ATTACHING THE AUXILIARY HANDLE (See Figure 6)

• Press the auxiliary handle (1) onto the upper shaft so that the handle is angled toward the rear handle that allows for comfortable operation.
• Slide the auxiliary handle over the metal ring (2) and ensure the metal ring fits between the slot on the auxiliary handle.

• Align the holes on the auxiliary handle with the holes on metal ring.
• Insert the handle knob (3) through the auxiliary handle.
• Tighten until there is no movement in the handle.

OPERATING  INSTRUCTIONS

STARTING THE SNOW SHOVEL (See Figure 7)
In order to avoid serious injury, the operator and unit must be in a stable position when starting the snow shovel.

Follow this sequence exactly in order to start the snow shovel.

• Verify that the battery pack is inserted into the battery compartment.
• Press and hold the lock-out button.
• While holding the lock-out button, press and hold the trigger switch.

NOTE: The Snow Shovel will not start if the lock-out button is not held until the trigger switch is lifted. Once trigger is pressed and unit is started, release the lock-out button.

• Hold the handles and begin to use the snow shovel.

STOPPING THE SNOW SHOVEL (See Figure 7)

• Release the trigger switch.
• The lock-out button will pop out, and the snow shovel will stop.

USING THE SNOW SHOVEL (See Figure 8)

• Start the snow shovelby following the Starting Instructions. The depth and weight of the snow will determine the forward speed.
• Push the snow shovel forward so that it rides on the scraper.

MAINTENANCE

REPLACING THE SCRAPER (See Figures 9-10)

WARNING

IN ORDER TO AVOID SERIOUS PERSONAL INJURY, TURN THE SNOW SHOVEL OFF AND REMOVE BATTERY BEFORE PERFORMING ANY MAINTENANCE.
Use only the manufacturer’s original replacement parts.

• Place the snow shovel on the ground or on a work bench. Position the snow shovel so that the impeller is facing up.
• Remove the four screws that are located beneath the impeller that secure the scraper to the housing using a Phillips screwdriver. (Fig. 9)
• Remove the scraper, and discard it in the proper manner. (Fig. 10)
• Snap the new scraper into position, and attach it to the snow shovel by reinstalling the four screws.

STORAGE

• Allow the motor to cool down before storing.

• Store the snow shovel in a locked location in order to prevent unauthorized use or damage.

• Store the snow shovel in a dry, well-ventilated area.

• Store the snow shovel out of the reach of children.
  CLEANING

• In order to avoid serious personal injury, turn the snow shovel off and remove battery before cleaning or servicing.

• Use a small brush to clean the outside of the snow shovel. Do not use strong detergents. Household cleaners that contain aromatic oils such as pine and lemon, and solvents such as kerosene can damage the plastic housing and handles. Wipe off any moisture using a soft cloth.

TRANSPORTING THE SNOW SHOVEL

• Allow the motor to cool down before transporting.
• Secure the snow shovel while transporting.
• When moving the snow shovel, grasp it by the top handle and auxiliary handle.

MAINTENANCE

IMPELLOR REPLACEMENT

1. Remove the right side cover by removing 6 screws.

2. Pull the belt tensioner (idler arm) away from the drive pulley. Be sure not to lose the washer and screw left.

3. Remove the belt.
   

4. Remove the 4 screws.

5. Remove the left side cover by removing 6 screws.

6. Remove the nut that secures the left side plate.
   

7. Remove the impellor shaft with pulley assembly attached.

8. Withdraw the old/damaged impellor. Be sure not to lose the shaft sleeve that secures left side of the shaft.

9. Insert the impellor shaft with pulley assembly attached in the new impellor. Be sure to replace the retained shaft sleeve that secures left side of the shaft.
   

10. Replace and tighten the remaining nut to secure the left side plate assembly.

11. Replace and tighten the remaining nut to secure the left side plate assembly.

12. Replace and tighten the remaining screws to secure the pulley assembly.
    

13. Place the belt back into its place.

14. Place the belt tensioner (idler arm) back into its place.
    

15. Replace and tighten the remaining screws to secure the right side cover.

ENVIRONMENTALLY SAFE BATTERY DISPOSAL

The following toxic and corrosive materials are in the batteries used in this tool battery pack: Lithium-Ion, a toxic material.

WARNING
Toxic materials must be disposed of in a specified manner in order to prevent contamination of the environment. Before disposing of damaged or worn out Lithium-Ion battery packs, contact your
local waste disposal agency for information and specific instructions. Take the battery to a local recycling and/or disposal centre that is certified for disposal. If the battery pack cracks or breaks,
whether it leaks or not, do not recharge it and do not use it. Dispose of it and replace it with a new battery pack. DO NOT ATTEMPT TO REPAIR IT!

Follow these instructions in order to avoid injury and the risk of fire, explosion, or electric shock, and to avoid damage to the environment:

• Cover the battery’s terminals with heavy-duty adhesive tape.
• Do not attempt to remove or destroy any of the components of the battery pack.
• Do not attempt to open the battery pack.
• If a leak develops, the electrolytes that are released are corrosive and toxic. Do not get the solution in the eyes or on the skin, and do not swallow it.
• Do not place batteries in regular household trash.
• DO NOT incinerate batteries.
• DO NOT place batteries where they will become part of any waste landfill or municipal solid waste stream.
• Dispose of batteries at a certified recycling or disposal center.

TROUBLESHOOTING

battery by following the procedures in the battery and charger manual.
The lock-out button or trigger switch were not used properly.| Press and hold the lock-out button, while holding the lock-out button, press the switch trigger.
Battery is too cold.| Remove battery from snow shovel. Bring battery and charger into warm area for 15 minutes on charge. After 15 mins, remove from charger and install in snow shovel for use.
The battery is not fully inserted into the housing.| Check if the battery is fully inserted into the housing.
Battery may require service or replacement.| Call toll free helpline, at1-888-908-6757 or replace battery.
The motor is on, but the rotor does not turn.| The belt is damaged.| Replace the belt.
The snow shovel leaves a thin layer.| The scraper is worn.| Replace the scraper.

WARRANTY

GREENWORKS hereby warranties this product, to the original purchaser with proof of purchase, for a period of three (3) years against defects in materials, parts or workmanship. GREENWORKS, at its own discretion will repair or replace any and all parts found to be defective, through normal use, free of charge to the customer. This warranty is valid only for units which have been used for personal use that have not been hired or rented for industrial/commercial use, and that have been maintained in accordance with the instructions in the owners’ manual supplied with the product from new.

ITEMS NOT COVERED BY WARRANTY

1. Any part that has become inoperative due to misuse, commercial use, abuse, neglect, accident, improper maintenance, or alteration; or
2. The unit, if it has not been operated and/or maintained in accordance with the owner’s manual; or
3. Normal wear, except as noted below;
4. Routine maintenance items such as lubricants, scraper, impeller;
5. Normal deterioration of the exterior finish due to use or exposure.

GREENWORKS HELPLINE (1-888-909-6757):
Warranty service is available by calling our toll-free helpline, at 1-888-909-6757.

TRANSPORTATION CHARGES
Transportation charges for the movement of any power equipment unit or attachment are the responsibility of the purchaser. It is the purchaser’s responsibility to pay transportation charges for any part submitted for replacement under this warranty unless such return is requested in writing by GREENWORKS.

USA address

• Greenworks Tools
• P.O. Box 1238
• Mooresville, NC 28115

EXPLODED VIEW/PARTS LIST

TOLL-FREE HELPLINE: 1-888-909-6757

References

• Greenworks Outdoor Power Equipment, Lawn & Garden Tools

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>