ARTIS Niteo LED Bathroom Mirror Installation Guide
- March 15, 2024
- artis
Table of Contents
ARTIS Niteo LED Bathroom Mirror Installation Guide
Notes: to ensure the normal use of products, it is required set out wires as per the regulations of IEE at the installation places. The products are only applicable to being installed on the indoor solid wall, etc. The installation must be executed by a professional electrician, and wrong installation may lead to product damage and personal injury
Installation tools (as shown below)
Flexible rule
Leveling instrument
Churn drill
Screwdriver
Hammer
Installation instruction:
- Make certain the wall is solid, and use the flexible rule to measure the centre distance between two hardy holes on the mirror frame **(“a” and “b” in Fig. 2).
**
- Use the flexible rule to measure the centre distance between two hardy holes on the wall (“a” and “b” in Fig. 2), and mark them out with a pencil.
- Choose the churn drill with an appropriate drill bit to make two holes at the marked places, and use a special ceramic drill if the wall surface is made of ceramic tiles.
- Use the hammer to strike the expansion rubber plug in accessory bag into the holes on the wall, and then use the screwdriver to tighten the screws into the holes (exposure for 8-12mm).
- Switch off the power, and then use a terminal block to connect the three-core exposed wires with those reserved on the wall (see details in Fig. 3)****
- Hang the product on the screw crossing two hardy holes to fix it.
- At last, turn on and wave your hand to test the sensor. **(Fig. 1)
** Note: You hand should be 0-50mm far away from the sensor, the distance of wall to the mirror need more than 200mm
Wiring diagram for input terminal
**Schematic diagram
**
- LED Strip
- Infrared sensor
- Constant-voltage power
- Anti-foggy (optional function)
- Shaving socket(optional function)
- Transfer relay (work with anti-foggy
Warm tips:
- During operation, never put hard and sharp materials directly against the mirror surface, or otherwise, it may result in current leakage and even personal injury accident..
- Never forget to turn off the power switch in storm days, or otherwise, lightning may damage electric elements of the product.
- During normal operation, never forcibly pull out the power plug to stop the product, or otherwise, electric elements of the product may be damaged.
- Please pull out the power plug if the product is not used for a long time,
Read User Manual Online (PDF format)
Loading......