ARTIS LED Bathroom Mirror Installation Guide
- May 15, 2024
- artis
Table of Contents
ARTIS LED Bathroom Mirror
Notes: to ensure the normal use of products, it is required set out wires as per the regulations of IEE at the installation places. The products are only applicable to be installed on the indoor. The installation must be executed by a professional electrician, wrong installation may lead to product damage and personal injury.
Hanging bar Installation Manual
(Instruction for LED bathroom mirror)
2. Horizontal the hanging bar
Make a mark on the wall through the hanging bar hole and drill the holes in
the mark with a drill
3. (Apply to the solid wall only)
Put the expansion plug into the hole in the wall, put the hanging bar against
the hole in the wall, fix the hanging bar in the wall with screws
4. Measure the distance between these two hanging bar
5. According to the distance, place the shorter hanging bar in the lower
center of the longer hanging bar, then following the step 2 and step 3.
6. To connect as per above photo
7. Hang up the mirror shake left and right to see if it is stable
8. Turn on the power
Hardy Holes Installation Manual
(Instruction for LED bathroom mirror)
-
please choose portrait or landscape installation method first
To use the measure tape to measure the distance between the two holes -
Horizontal the leveling instrument
Mark the distance between two holes on the wall with a pen -
Drill the holes in the mark with a drill.
-
Uust apply to the solid wall)
Use the hammer to strike the expansion rubber plug into the holes on the wall, and then use the screwdriver to lighten the screws into the holes(exposure for 8-12mm) -
Please cut off all the power before the connection
-
To connect as per above photo
-
Hang up the mirror shake left and right to see if it is stable
-
Turn on the power
Function usage
- Please choose below operation according to what product you buy: A, Touch switch.
- Touch switch holding to gradually dim.
- Touch switch press-hold color change.
- Tap-tap touch color change.
- The first short touch, turn on the light and demist pad; The second short touch, chang the color temperature; The third short touch, turn off the light and demist pad, when the light be turned on; the first holding touch; the brightness of the light can be changed from 100% to 10% or 10% to100%, the second holding touch; the brightness of the light can be changed from 10% to 100% or 100% to 10%
parts list
Installation tools (as shown below)
Warm tips
- Please do not use,if the product have any bocken.
- During operation never put hard and sharp materials directly against the mirror surface. Otherwise, it may result in current leakage and even personal injury accident.
- Never forget to turn off the power switch in storm days. Otherwise lightning may damage electric elements of the product.
- During normal operation, never forcibly pull out the power plug to stop the product. Otherwise, electric elements of the product may be damaged.
- Please pull out the power plug if the product is not used for a long time.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>