JASCO 59387 In Wall Smart Outlet User Guide

JASCO 59387 In Wall Smart Outlet

Product Information

Specifications:

• Product Name: In-Wall Smart Outlet
• Model Number: 59387 ZWA1003
• Manufacturer: Jasco Products Company
• Compatibility: Z-Wave-certified devices

Product Usage Instructions

Changing Faceplate:

1. Push the edge of the faceplate to slide it to the right.
2. Align the new faceplate with the grooves on the front of the receptacle and slide it into place.

Removing Outlet:

1. Shut off power to the circuit at the circuit breaker or fuse box.
2. Verify power to the switch box is OFF before continuing.
3. Remove wallplate.
4. Remove the outlet mounting screws.
5. Carefully remove the outlet from the electrical box.

Wiring Instructions:

1. Connect green/bare wire to the GROUND terminal.
2. Connect the black wire from the power source (hot) to the LINE terminal.
3. Secure the smart device into the electrical box with the provided mounting hardware.

Pairing with Z-Wave Network:

1. Follow the instructions for your Z-Wave-certified controller to add a device to the Z-Wave network.
2. Press the program button on your device when prompted by the controller.
3. The blue indicator LED will flash twice per second for up to 10 minutes to indicate pairing mode.

FAQ:

• Q: Can I use a different faceplate with this outlet?
  A: No, only use the replacement part (ZWA1003-RC) provided by Jasco Products Company.

• Q: How do I control the outlet after installation?
  A: Use your Z-Wave-certified controller to set up groups, scenes, schedules, and automation for controlling the outlet. You can also control it remotely via your mobile devices if your controller supports remote access.

Thank you for your purchase!

Instructions made easy Read instructions or watch easy-to-follow video.

• Scan code or visit byjasco.com/59387i.

Register your product Receive exclusive deals and register your product.

• Scan code or visit byjasco.com/deals.

For additional JascoPro Series products, visit our website www.jascopro.com.

Like our product?
Leave a review on your favourite retailer’s website or amazon.com.
Having problems?
Let us know how we can help.
Call 1-800-654-8483 between
7AM-8PM, M-F, Central Time.

ADDING/INCLUSION

ADDING/INCLUSION YOUR DEVICE TO A Z-WAVE NETWORK:

1. Follow the instructions for your Z-Wave-certified controller to add a device to the Z-Wave network.
2. Once the controller is ready to add your device, press the program button. You have complete control to turn ON/OFF the smart outlet according to groups, scenes, schedules and interactive automation programmed by your controller.

If your Z-Wave-certified controller features remote access, you can control your outlet from your mobile devices. If prompted by the controller to enter the S2 security code, refer to the QR code/security number on the side of the box or the QR code label on the product (see Figure 1). Enter the 5-digit code.

TO REMOVE/EXCLUSION AND RESET THE DEVICE

1. Follow the instructions for your Z-Wave-certified controller to remove a device from the Z-Wave network.
2. Once the controller is ready to remove your device, press the program button.

TO RETURN TO FACTORY DEFAULTS
Press the program button three times, then, press and hold the button for at least three seconds. The LED blinks five times to confirm.
NOTE: This should only be used if your network’s primary controller is missing or otherwise inoperable.
NOTE: SmartStart enabled products can be added into a Z-Wave network by scanning the QR code on the product with a controller providing SmartStart inclusion. No further action is required and the SmartStart product will be added automatically within 10 minutes of being switched on in the network vicinity.

SPECIFICATIONS

• Power: 125VAC, 60Hz

• Signal frequency: 908.4/916MHz

• Operating temperature range: 32-104° F (0-40° C)

• Total max load for both outlets: 1875W (15A) resistive load
  Max load for Z-Wave controlled outlet:

  • 1000W incandescent
  • 1/2HP motor
  • 1875W (15A) resistive load
  • 4.0A CFL/LED
  • Specifications subject to change without notice due to continuing product improvement.

FEATURES

IMPORTANT! The fixture controlled by the Z-Wave smart outlet must not exceed outlet ratings.

Get to you know your smart outlet

• One Z-Wave-controlled outlet

• One always-ON outlet

• Turn ON/OFF manually or through the Z-Wave controller

• Can be added in multiple groups and scenes

• Configurable LED indicates outlet status when turned on

• Screw terminal installation – requires wiring connections for line (hot), neutral and ground

• This Z-Wave device has advanced features that allow you to customize your experience. These features can only be adjusted by a Z-Wave-enabled controller that supports the Z-Wave configuration command class. For a complete list of adjustable configurations, visit www.ezzwave.com/config.

• A. Line (hot)

• B. Neutral (white)

• C. Ground (green/bare)

• D. Always-ON outlet

• E. Manual/program button

• F. Z-Wave controlled outlet

CHANGE FACEPLATE

This step is optional. Before installation, you may want to change the faceplate to match your wallplate or décor.

1. Push the edge of the faceplate to slide it to the right.
2. Align the new faceplate with the grooves on the front of the receptacle and slide it into place.

WARNING – Use only replacement part (ZWA1003-RC) with receptacle (Jasco Products Company, Model ZWA1003).
WARNING – RISK OF FIRE OR ELECTRIC SHOCK. Do not use this replacement part with any receptacle other than the one specifically marked on the packaging and in these instructions.

This product can be operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers. All mains operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network

REMOVE OUTLET

1. Shut off power to the circuit at the circuit breaker or fuse box.
   IMPORTANT! Verify power to switch box is OFF before continuing.

2. Remove wallplate.

3. Remove the outlet mounting screws.

4. Carefully remove the outlet from the electrical box – DO NOT disconnect the wires.

5. Identify the following three wires in the electrical box:

   • A. Ground – Green/bare
   • B. Line (hot) – Black (connected to power)
   • C. Neutral – White

6. Disconnect the wires from the existing outlet – label wires according to the previous terminal connections.

INDICATOR LED
The device supports the Indicator Command Class and support the Indicator ID 0x50 (Identify) and Properties ID 0x03, 0x04 and 0x05
The indicator LED acts as a guide light or status indicator.
How to cycle through options:
Press the program button five times to cycle through the options in the following order:

1. LED ON when the load is ON (default)
2. Always OFF
3. Always ON

Z-WAVE OUTLET WIRING

WIRING REQUIREMENTS
Attach using the enclosure’s holes, strip insulation 5/8in. (16mm). Tighten screws to 12lbf-in. (14Kgf-cm).
IMPORTANT! The screw terminals in this receptacle are intended for only copper wire. Consult a qualified electrician if you have aluminum wiring. Use 14 or 12AWG wire suitable for at least 90° C for supplying line (hot), neutral and ground connections.

1. Connect green/bare wire to the GROUND terminal.
2. Connect the black wire from the power source (hot) to the LINE terminal.
3. Connect the white wire to the NEUTRAL terminal – use jumper if necessary.
4. Secure the smart device into the electrical box with the provided mounting screws – ensure wires are not pinched or crushed
5. Install the wallplate.
6. The blue indicator LED flashes twice per second for up to 10 minutes to indicate the device is in pairing mode.

Z-WAVE INTEROPERABILITY
This product can be included and operated in any Z-Wave network with other Z -Wave-certified devices from other manufacturers and/or other applications. All non-battery-operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.

This device supports association command class (2 Groups)

• Association Group 1 supports Lifeline, Binary Switch Report
• Association Group 2 supports Basic Set and is controlled by pressing the ON or OFF button with the local load

All brand names shown are trademarks of their respective owners.

WARNING

• RISK OF FIRE
• RISK OF ELECTRICAL SHOCK
• RISK OF BURNS
• CONTROLLING APPLIANCES
  • DO NOT EXCEED RATINGS
  • DO NOT USE TO CONTROL ANY DEVICE WHERE UNINTENDED OPERATION COULD CAUSE UNSAFE CONDITIONS (HEAT LAMP, SUN LAMP, ETC.)
  • NOT FOR USE WITH MEDICAL OR LIFE-SUPPORT EQUIPMENT
  • FOR INDOOR USE ONLY

FCC/IC

Suppliers Declaration of Conformity | Model #: 59387 | Jasco Products Co., 10 E. Memorial Rd., Oklahoma City, OK 73114, www.byjasco.com
This device complies with Part 15 of the FCC and Industry Canada license- exempt RSS standards. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

See product label for FCC/IC certification numbers. CAN ICES-3(B)/NMB-3(B)

WARRANTY

Jasco Products Company warrants this product to be free from manufacturing defects for five years from the original date of consumer purchase. This warranty is limited to the repair or replacement of this product only and does not extend to consequential or incidental damage to other products that may be used with this product. This warranty is in lieu of all other warranties, expressed or implied. Some states do not allow limitations on how long an implied warranty lasts or permit the exclusion or limitation of incidental or consequential damage, so the above limitations may not apply to you. This warranty gives you specific rights and you may also have other rights which vary from state to state. Please contact our U.S.-based Consumer Care at 1-800-654-8483 (option 1) between 7AM–8PM, M-F, Central Time or www.byjasco.com if the unit should prove defective within the warranty period.

Z-Wave Association Capabilities through gateway only TM

Group ID| Group Profile Name| Profile| Maximum Nodes| Description| Endpoint ID
---|---|---|---|---|---
1| Lifeline| {COMMAND_CLASS_SWITCH_BINARY,SWITCH_BINARY_REPORT}| 5| TM Z-Wave Plus  Lifeline(When device status change, SWITCH_BINARY_REPORT to report device status)| 0
2| Single Press| BASIC Set Value 0x00 will map to SWITCH_BINARY_SET OFF 0x00 BASIC Set Value 0xff will map to SWITCH_BINARY_SET ON 0xff| 5| Supports Basic Set and is controlled with the local load by single press| 0

Note: Basic Report (Current Value, Duration) maps to Binary Switch Report (Value, Duration).

In-Wall Receptacle

Z-Wave Device Type Identifiers:

SPECIFIC_TYPE_NOT_USED

Z-Wave Role Type:

Z-Wave Command Class:

Z-Wave Command Class| Version| Controlled| Supported| Supported S2
---|---|---|---|---
Application Status| –| NO| YES| NO
Association Group Info| 3| NO| YES| YES
Association V2| 2| NO| YES| YES
Basic V2| 2| YES| YES| YES
Central Scene V3| 3| No| YES| YES
Configuration V4| 4| NO| YES| YES
Device Reset Locally| –| NO| YES| YES
Firmware Update Meta-Data V5| 5| NO| YES| YES
Manufacturer Specific V2| 2| NO| YES| YES
Powerlevel| –| NO| YES| YES
Scene Activation| –| NO| YES| YES
Scene Actuator Conf| –| NO| YES| YES
Security S2| –| NO| YES| NO
Supervision| –| NO| YES| NO
Switch Binary V2| 2| NO| YES| YES
Transport Service V2| 2| NO| YES| NO
Version V3| 3| NO| YES| YES
Z-Wave Plus Info V2| 2| NO| YES| NO
Indicator| 3| NO| YES| YES
Multi-Channel Association| 3| NO| YES| YES

Z-Wave Configuration Capabilities

Parameter Number| Parameter Size| Parameter Name| Parameter Description| Parameter Values| Button Press Required?| Simple Button Press method| Advanced Menu Mode Method| Choose Parameter
---|---|---|---|---|---|---|---|---
3| 1| LED Light Mode| Set the LED Light Mode| 0| LED ON when load is OFF, LED is OFF when load is ON| YES| YES| N/A| N/A
1 (Default)| LED ON when load is ON, LED is OFF when load is OFF
2| LED always OFF
3| LED always ON
35| 1| LED Light Intensity| Set the LED Light Intensity| 4 – Medium Brightness| 1 – Lowest to 7-Highest
(4-Needs to be the current brighteness of our product today)| NO| N/A| N/A| N/A
** 36| 1| Guidelight Mode Intensity| Set the Guidelight Mode Intensity| 4 – Medium Brightness**| 1 – Lowest to 7-Highest

(4-Needs to be the current brighteness of our product today)

| NO| N/A| N/A| N/A
84| 1| Reset Factory Default| Reset Switch to Factory Defaults| 0 (Default)| No specific behavior| No| N/A| N/A| N/A
1| Reset to factory defaults

MADE IN MALAYSIA
Distributed by Jasco Products Company LLC, 10 E. Memorial Rd., Oklahoma City, OK 73114.
This Jasco product comes with a 5-year limited warranty. Visit www.byjasco.com for warranty details.
Questions? Contact our U.S.-based Consumer Care at 1-800-654-8483 7AM-8PM, M-F, Central Time.
©JASCO 2022 | ZWA1003 | 59387 | 07/19/22 v1

References

• amazon.com
• YouTube
• Product Registration
• Jasco

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>