MTNTOPCN MTN229163 Front Stubby Bumper Instruction Manual
- May 15, 2024
- MTNTOPCN
Table of Contents
AQMR Stubby Front Bumper
INSTALLATION INSTRUCTIONS
SKU: MTN229163
MTN229163 Front Stubby Bumper
Begin by unpacking all items and inspecting for missing pieces or damage.
If you have any concens, please contact the company the product was purhcased
from.
Extra hardware may be included with the hardware kit.
HARDWARE INCLUDED
(8) M12 Hexagon nuts with flange
(2) M12Xx30 screw
(14) M6x20 Allen
(14) M6 Hexagon nuts with flange
(3) M8x25 Allen
(3) M8 Hexagon nuts with flange
STEP 1 | Loosely install bull bar onto the
bumper using the provided M6x20 allen head hardware.
STEP 2 | Loosely
install the fairlead mount by securing to the bumper and bull bar using the
provided M8x25 allen head hardware.
Secure the hardware for the bull bar, then secure the hardware for the
fairlead mount using a 13mm wrench and 5mm allen bit.
STEP 3 | The bar body is welded withM12x35 external hexagonal
screws, w hich can be moved and adjusted to a suitable position to align with
the installation holes of the framel.  STEP 4 | Lift the bumper
to the vehicle and secure the bottom corners using the provided M12 flange nut
hardware using 18mm socket.
Once the bumper is secure, install and secure
the remaining M12x30 hex head hardware with a 18mm socket. Torque all mounting
bolts to 55 ft-lbs.
Note: Assistance is recommended prevent injury and damage to the product and vehicle.
STEP 5 | If you are running a winch
and fairlead, install it at this time using the hardware provided with the
winch and fairlead.