COSTWAY NP10911 10 x 13 Feet Outdoor Aluminum Retractable Pergola Canop Instruction Manual
- May 15, 2024
- COSTWAY
Table of Contents
COSTWAY NP10911 10 x 13 Feet Outdoor Aluminum Retractable Pergola Canopy
Product Specifications
- Product Name : Aluminum-Steel 10’x13′ Pergola
- Model Number : NP10911
- Material : Aluminum and Steel
- Dimensions : 10’x13′
Product Usage Instructions
Before You Start
Make sure to use the hex keys provided in the box. You may need a drill for some steps. It’s recommended to have three or more people during assembly.
Assembly Steps
- Place Part X on four Poles (Part A) and connect A and (A1 or A2) using Bolt J.
- Connect B, B1, and B2 with Bolt J to build Main Beam 1.
- Connect D and D1 to build the Cross Beam (D and D1) using Bolt J.
Tips for Assembly
- Do not tighten the bolts too much when inserting parts together.
- Ensure to insert the hooks and bolts in the correct orientation as shown in the diagrams.
- Keep track of the different components and follow the assembly sequence.
FAQ
- Q: How many people are recommended for assembly?
- A : It is recommended to have three or more people during the assembly process.
- Q: What tools are needed for assembly?
- A : The assembly may require hex keys, a drill, and the provided bolts for connecting the parts together.
- Q: Can the pergola be disassembled and reassembled?
- A : Yes, the pergola can be disassembled and reassembled if needed. Follow the reverse steps of the assembly process.
Before You Start
- Please read all instructions carefully.
- Retain instructions for future reference.
- Separate and count all parts and hardware.
- Read through each step carefully and follow the proper order.
- We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
- Always place the product on a flat, steady and stable surface.
- Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.
Use the hex keys in the box
You may need to use a drill for this step.
Three or more people
are required at this stage.
You may need a ladder.
Do not tighten screws all the way for now.
Pergola1 0 ’X13’ ANCHOR BLUEPRINT
Parts list
OVERALL
1.First Remove plastic plugs from Part A1/A2 and Part A.
Then Place Part X on four Poles (Part A) and connect A and (A1 or A2) by using Bolt J to attach the four Poles.
Don’t tight the bolts too much when you insert A into A1 and A2.
2. Connect Part I and Four Poles by using Bolt J.
3. Connect B, B1, and B2 by using Bolt J to build Main Beam 1.
Connect C, C1, and C2 by using Bolt J to build Main Beam 2. Meanwhile, attach Part R to C2 using Bolt J.
Connect Main Beam 1 and Main Beam 2 with the four Poles using Bolt M.
Connect Main Beam 1 and Main Beam 2 with the four Poles using Bolt M
- Insert Hook N into the slot of Part D. Repeat twice.
- Insert Hook P and Hook O into the slot of Part E.
Please be certain to insert Hook P with this method. Don’t insert Hook P the opposite way as shown in the diagram!
Attention : Always keep Hook P and C1/C2/C in the same side of Part E.
Connect D and D1 to build the Cross Beam (D and D1) by using Bolt J.
Connect the Cross Beam (D and D1) with the four Poles using Bolt M.
1. Connect E and E1 by using Bolt J to build the Cross Beam (E and E1).
2. Repeating the same method use F and F1 to build the Cross Beam (F&F1).
Connect the Cross Beams (E and E1) and (F and F1) with Main Beams 1 and 2.
Attention : Always keep Hook P and C/C2/C1 in the same side.
Insert G, G1, H, and H1 into the canopy from its side.
Connect G and G1 with B, B2, and B1 using bolt K, Hold the canopy with the frames.
- Connect H and H1 through the hook.
- Pull the line from the canopy and put on a hook to tighten the canopy.
- Connect the canopy and the Hook using Bolt J.
Hook Part T onto Hook P.
Stabilize Part T to beam B/B2/B1 in order to fasten Top Fabric.
Secure Foot I to the ground using Part U.
In the end, Please make sure all screws are completely fixed before using.
Return / Damage Claim Instructions
DO NOT discard the box / original packaging
In case a return is required, the item must be returned in the original box. Without this, your return will not be accepted
Take a photo of the box markings.
A photo of the markings (text) on the side of the box is required in case a part is needed for replacement. This helps our staff identify your product number to ensure you receive the correct parts.
Take a photo of the damaged part (if applicable).
A photo of the damage is always required to file a claim and get your replacement or refund processed quickly. Please make sure you have the box even if it is damaged
Send us an email with the images requested.
Email us directly from the marketplace where your item was purchased with the attached images and a description of your claim.
If you’re having difficulty, our friendly customer team is always here to help
- USA :cs.us@costway.com
- AUS :cs.au@costway.com
- GBR :cs.uk@costway.com
- FRA :cs.fr@costway.com
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>