Govee H61A0 RGBIC LED Neon Ropee Lights User Manual

Govee H61A0 RGBIC LED Neon Ropee Lights User Manual

Safety Instructions

Read and follow all the safety instructions:

• Rated as IP67 Waterproof, this product can be used outdoors but can not be immersed in water.
• Use the product with the provided power adapter only.
• Keep the product away from sharp objects or strong corrosive chemicals.
• Although this product has good bending performance, when bending the neon rope light, please try not to fix the buckle too close and bend it too large, so as not to damage the light beads and then affect the life span.
• Do not install the neon rope light near any heat sources.
• Do not allow children to install the neon rope light alone.
• Avoid installing the neon rope light near potentially dangerous sources (e.g., candles, liquid-filled objects).
• Unroll the neon rope lights before powering them on.
• In the case of only using adhesive to fix the buckle, if you want to get the maximum adhesion, it is suggested that you wait for a period of time to install the neon rope light after fixing the buckle.
• It is recommended that this product should not be stuck to the back ofTV and display.

Introduction

Thanks for choosing the Govee RGBIC LED Neon Rope Lights. This product is equipped with a 3m RGBIC neon rope light and supports app, voice (Alexa/Google Assistant). RGBIC is Govee’s latest lighting display technology. You can give free rein to your imagination and create your own unique neon rope light curve.

What You Get

At a Glance

Installing Your Device

Before You Install

1. Unpack the box and check all items listed in the packing list.
2. Power on the neon rope light and check whether it lights up.

Installing Steps

1. Wipe the surface to make sure it’s clean and dry.

2. After tearing off the adhesive film, you can stick the buckle to the place you want and press it firmly (if necessary, you can  reinforce the buckle with ascrew), and then clip the neon rope light into the buckle.

3. Peel off the protective film on the control box and stick it on.Place the control box close to the music source to achieve the best music effect.

4. Power on the neon rope lights and start using.
   

Pairing Your Device with the Govee Home App

What You Need

1. A Wi-Fi router supporting the 2.4GHz and 802.1 1 b/gin bands. 5GHz is not supported.
2. A smartphone or tablet running iOS 8.0 (or above) or Android 4.3 (or above).

Pairing Instructions

1. Download the Govee Home app from the App Store (iOS devices) or Google Play (Android devices).
2. Turn on Bluetooth on your smartphone.
3. Open the app, tap the “+” icon in the top right corner and search for “H61A0”.
4. Tap the device icon and follow the on-screen instructions to complete pairings.

Controlling the Device with Your Voice

1. Open the app, then tap the device icon to enter detail page.
2. Tap the setting icon in the top right corner.
3. Select Using Guidance and follow on-screen instructions to control the device using your voice.

Specifications

Troubleshooting

1. The adhesive tape is not strong enough.
   • Make sure the installation surface is clean and dry.
   • Firmly press over the strip after sticking.
   • Reinforce the installation via more clips and tape.
2. Cannot connect to Bluetooth.
   • Do not skip Bluetooth connection in the app.
   • Ensure Bluetooth on your smartphone has been turned on.
   • Your smartphone may be incompatible with the Govee Home app. Try using a different smartphone then reconnect.
   • Power the neon rope lights and your smanphone Bluetooth off then on, then try again.
   • Ensure that your smartphone is within 1m/3.28ft of the neon rope lights when connecting.
   • Clear any obstructions that are between the neon rope lights and your smartphone.
3. The neon rope lights does not display the full selected color/some LED beads do not light up.
   • Please contact the Govee support team for rapid product replacement.
4. Cannot sync the neon rope lights to the beat of my music.
   • Move the control box closer to the music source.
   • Clean the mic on the control box then try again.
5. Cannot connect to Wi-Fi.
   • Do not skip the Wi-Fi connecting steps in the app.
   • 5GHz neMork is not supported. Please set the router to 2.4GHz and then reset it.
   • Connect your phone to Wi-Fi and check whether the neMork works well.
   • Make sure you have entered the correct Wi-Fi name and password.
   • Change your Wi-Fi password to a brief one. 8 numbers and letters are suggested.
   • Connect hotspot in your phone to the neon rope lights and check whether the router works with the neon rope lights.
6. Cannot connect to Alexa.
   • Pull out every connective part of the neon rope lights and firmly re-connect them.
   • Re-connect your phone to Wi-Fi.
   • Plug out the adapter pon and re-plug it in.

Customer Service

For FAQs and More Information, plaese visit: www.govee.com

Govee Home App

Warranty: 1 2-Month Limited Warranty
Support: Lifetime Technical Support
Email: [email protected]
  Official Website: www.govee.com
@Govee @govee_official @govee.official
@GoveeofficiaI @Govee.smarthome

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>