METAL TIME MT002 Sailors Companion Lighthouse Instruction Manual
- May 15, 2024
- METAL TIME
Table of Contents
MT002 Sailors Companion Lighthouse
THE GREAT BELL
3D Metal Mechanical Model Building Kit
Assembly instructions
Collect the Best
35 Pieces
3”’ hours
WARNING! PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND USE
When assembling the model, don’t rush, avoid pointing details at yours or any-
one else’s face. If one of the parts has a sharp edge, please file it down.
Use pli- ers and additional tools to assemble the model. Each kit contains a
cloth for wiping and polishing the model once it’s assembled. If needed, you
may choose to apply a small amount of siliconbased grease to the spring and
the mechanism; however, this is not a requirement for the mechanism to
function properly. The mechanism will perform at its best in the absence of
excessive friction or excessive play of its parts
WARNING! Product contains small parts and sharp parts. Not suitable for chil-
dren under 3 years of age
SYMBOLS
| Bend the eyelet 90°
---|---
| Twist the eyelet 45°
Model for collectors, suitable for children 14+
MODEL PARTS AND ASSEMBLY TOOLS
BATTERIES CHANGING
To change the battery, lift and remove the watch frame (1), take out the watch
(2), replace the battery, insert the watch (3) and the frame (4)
Model name:
THE GREAT BELL
Construction of the tower began on 28 September 1843. Elizabeth Tower,
originally referred to as the Clock Tower, but more popularly known as Big
Ben, was raised as a part of Charles Barry’s design for a new Elle memati eee
old palace was largely destroyed by
fire on 16 October 1834. Although Barry was the chief architect of the neo-
gothic palace, he turned to Augustus Pugin for the design of the Clock Tower,
which resembles earlier Pugin designs, including one for Sca- risbrick Hall in
Lancashire.
Product number: SKU073
Product material: Stainless steel
Number of metal sheets: 4 pcs
Finish product size: L11.34″ xW3.19″ x H3.19” (L28,8cm x W8,1cm x H8,1cm)
WARNING!
The product contains small and/or sharp parts. Not suitable for children under
3 years of age. Cut/remove the band that keeps the spring in place ONLY WITHIN
the spring chamber/ container. DO NOT cut the restraining band outside the
assembled spring chamber, as the spring will unwind with force fully discard
the metal sheet after parts have been removed.
This product is not a toy. Keep out of reach of children.
Conforms to CPSIA and CE standards. The product complies with the requirements
of EN 71-1,2,3; ASTM F963, REACH, AS/NZS 8124, GB 6675
Includes: steel sheets, clock mechanism, pliers, file, gloves, polishing cloth, user’s guide. LR626x1pc battery and LED candle are not included.
Designed in Ukraine
Made in China
No expiration date
MODEL BUILDING KIT
@hobbadd.cnhttps://metal-time.com/products/THE-GREAT-BELL
ALL RIGHTS RESERVED
© Metal-Time Inc., USA
www.metal-time.com
[email protected]