METAL TIME MT010 3D Metal Mechanical Model Building Kit Instruction Manual

May 15, 2024
METAL TIME

METAL TIME logo Instruction Manual
Assembly instructionsMETAL TIME MT010 3D Metal Mechanical Model
Building Kit - Parts Metal Mechanical Model
Building Kit

MT010 3D Metal Mechanical Model Building Kit

Collect the Best
205 PIECES Renault FT-17 / Rotating Turret Wind – up moving tracks
AGES 14+

STANDARD FIXING OF FASTENERS AND SYMBOLS

When assembling the model, don’t rush, avoid pointing details at yours or anyone else’s face. If one of the parts has a sharp edge, please file it down. Use pliers and additional tools to assemble the model. Each kit contains a cloth for wiping and polishing the model once it’s assembled.METAL TIME
logo

MODEL PARTS AND ASSEMBLY TOOLS

METAL TIME MT010 3D Metal Mechanical Model Building Kit -
Parts

WARNING! Product contains small parts and sharp parts. Not suitable for children under 3 years of age. Please read these instructions carefully before assembly and use.
WARNING! Cut/remove the band that keeps the spring in place ONLY WITHIN the spring chamber/container. DO NOT cut the restraining band outside the assembled spring chamber, as the spring will unwind with force

METAL TIME MT010 3D Metal Mechanical Model Building Kit - Parts
1| METAL TIME MT010 3D Metal
Mechanical Model Building Kit - Parts 2
---|---
METAL TIME MT010 3D Metal Mechanical Model Building Kit - Parts
3| METAL TIME MT010 3D Metal
Mechanical Model Building Kit - Parts 4
METAL TIME MT010 3D Metal Mechanical Model Building Kit - Parts
5| METAL TIME MT010 3D Metal
Mechanical Model Building Kit - Parts 6
METAL TIME MT010 3D Metal Mechanical Model Building Kit - Parts
7| METAL TIME MT010 3D Metal
Mechanical Model Building Kit - Parts 8
METAL TIME MT010 3D Metal Mechanical Model Building Kit - Parts
9| METAL TIME MT010 3D Metal
Mechanical Model Building Kit - Parts 10
METAL TIME MT010 3D Metal Mechanical Model Building Kit - Parts
11| METAL TIME MT010 3D Metal
Mechanical Model Building Kit - Parts 12

METAL TIME MT010 3D Metal Mechanical Model Building Kit - Parts
13

METAL TIME logoFT-17 is one of the best tanks of the First World War, the world’s first serial French light tank, the layout of which is called classic (control compartment – in front, combat with a circular rotation tower – in the center, and motor- transmission – in the rear).
Designed as an immediate infantry support tank in 1916-1917 by the renowned car manufacturer Louis Renault. By November 11, 1918, 3177 Renault tanks had been built. In numerous variants, the FT-17 was in service with more than 20 states and participated in various military conflicts.
Model name:
Product number: SKU010METAL TIME MT010 3D Metal Mechanical Model Building
Kit - Fig Designed in Ukraine
Made in China
Product material: Stainless steel
Number of metal sheets: 4 pcs
Finish product size: L7.09” xW3.27” xH2.91” (L18cm xW8,3m xH7,4cm)
WARNING!
The product contains small and/or sharp parts. Not suitable for children under 3 years of age.
In order to avoid possible injury from sharp edges, please carefully discard the metal sheet after parts have been removed. This product is not a toy. Keep out of reach of children.
Conforms to CPSIA and CE standards. The product complies with the requirements of EN 71-1,2,3; ASTM F963, REACH, AS/NZS 8124, GB 6675 MODEL BULDING KIT

https://metal-time.com/products/nimble-fighter
Includes: steel sheets, gears, power spring, pliers, file, gloves, polishing cloth, user’s guide.
ALL RIGHTS RESERVED
© Metal-Time Inc., USA
www.metal-time.com
info@metal-time.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals