METAL TIME MT012 Roadway Fantasy Instruction Manual
- May 15, 2024
- METAL TIME
Table of Contents
METAL TIME MT012 Roadway Fantasy
WARNING! PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND USE When assembling the model, don’t rush, and avoid pointing details at your or anyone else’s face. If one of the parts has a sharp edge, please file it down. Use pliers and additional tools to semble the model. Each kit contains a cloth for wiping and polishing the model once it’s assembled. If needed, you may choose to apply a small amount of silicon-based grease to the spring and the mechanism; however, this is not a requirement for the mechanism to function properly. The mech- anism will perform at its best in the absence of excessive friction or exces- sive play of its parts
WARNING! The product contains small parts and sharp parts. Not suitable for children under 3 years of age
STANDARD FIXING OF FASTENERS
Use pliers to bend the fastener
If there are no additional designations,use the standard fixing method
MODEL PARTS AND ASSEMBLY TOOLS
INSTALLATION INSTRUCTION
SPECIFICATION
- Product number : SKU012
- Product material: Stainless steel
- Number of metal sheets: 3 pcs
- Finish product size: L5.32″ x W3.1″ x H2.6″ (L13,5cm x W7,8cm x H6,6cm)
WARNING
- The product contains small and/or sharp parts. Not suitable for children under 3 years of age.
- To avoid possible injury from sharp edges, please carefully discard the metal sheet after the parts have been removed.
- This product is not a toy. Keep out of reach of children.
In 1901, William S. Harley drew up plans for a small engine with a displacement of 7.07 cubic inches (116 cc) and four-inch (102 mm) flywheels designed for use in a regular pedal-bi-cycle frame. Over the next two years, he and his childhood friend Arthur Davidson worked on their motor bicycle using the northside Milwaukee machine shop at the home of their friend Henry Melk. It was finished in 1903 with the help of Arthur’sbrother Walter Davidson.
Conforms to CPSIA and CE standards. The product complies with the requirements
of EN 71-1,2,3; ASTM F963, REACH, AS/NZS 8124, GB 6675
MODEL BUILDING KIT
SCANNER
CONTACT
- Includes: steel sheets, gears, pliers, file, gloves, polishing cloth, user’s guide.
- ALL RIGHTS RESERVED
- © Metal-Time Inc., USA
- www.metal-time.com
- info@metal-time.com
Designed in Ukraine
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>