SEALEY EVBT700 EV Battery Lift Hydraulic Platform Truck High Lift 700KG Capacity Instructions
- June 4, 2024
- SEALEY
Table of Contents
EV BATTERY LIFT/HYDRAULIC PLATFORM
TRUCK HIGH LIFT 700KG CAPACITY
MODEL NO: EVBT700
EVBT700 EV Battery Lift Hydraulic Platform Truck High Lift 700KG
Capacity
Thank you for purchasing a Sealey product. Manufactured to a high standard,
this product will, if used according to these instructions, and properly
maintained, give you years of trouble-free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE
OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT IS CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS
INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
| **** | Refer to instructions |
|---|---|
| **** | Wear safety footwear |
SAFETY
-
WARNING! Ensure all Health and Safety, local authority, and general workshop practice regulations and recommendations are strictly adhered to when lifting or moving heavy loads. The lifting or movement of heavy loads may be dangerous if not undertaken correctly.
✓ Familiarise yourself with the application and limitations, as well as the specific potential hazards peculiar to the truck.
✓ Maintain the truck in good condition (use an authorized service agent).
✓ Replace or repair damaged parts. Use genuine parts only. Unauthorized parts may be dangerous and will invalidate the warranty.
✓ Use a qualified person to lubricate/maintain the truck. DO NOT use brake fluid to top up the hydraulic unit. Use Sealey hydraulic oil only.
✓ Keep the truck clean for the best and safest performance. DO NOT use on Tarmacadam when fully laden as the wheels may sink in.
✓ Locate the truck in an adequate working area for its function and keep the area clean and tidy and free from unrelated materials. -
WARNING! Use truck on flat, level, solid ground, preferably concrete. Ensure the floor over which the truck will be transported is swept clean and that there are no obstacles in the way.
✓ Keep the work area clean, and uncluttered and ensure there is adequate lighting.
✓ Keep children and nonessential persons away from the loading/unloading and transporting area.
✓ Keep hands and body clear of the edge and underside of the platform when operating the truck.
✓ Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes. -
WARNING! Ensure load is placed level and centrally on a truck platform and if necessary strap load in place before attempting to lift, lower, or transport. When raised, check that the platform/load will not foul on the handle and/or your hand when lowering the load.
-
WARNING! Use the truck with diligence. DO NOT allow the truck to knock into anything. Even when unladen, the truck is heavy and if misused, could cause serious damage and/or personal injury. Continually monitor transportation, lifting, and lowering operations.
✓ Take care to ensure you can view the way ahead when moving the truck. Take special care when approaching blind corners.
✓ Before lifting check that there are no overhead obstructions.
✓ Engage the wheel locks before attempting to raise or lower the platform.
▲ DANGER! If heavy load tips or leans, STOP WHAT YOUR ARE DOING. Move quickly to a safe distance. DO NOT try to hold or steady a heavy load. Failure to follow this instruction may cause serious personal injury.
✓ Ensure the truck is fully lowered before attempting to transport a load.
✓ Before lowering the platform, ensure there are no obstructions underneath the platform and that all persons are standing clear of the truck.
✓ The lowering speed is a fixed rate regardless of the load weight. Stop lowering by releasing the valve control lever on the handle. -
WARNING! DO NOT exceed the rated capacity of the truck.
✕ DO NOT use the truck if a part is missing or damaged.
✕ DO NOT load the truck so that it is top-heavy. Ensure loads are evenly placed on the truck platform.
✕ DO NOT ride on the truck or allow any person to be transported on the truck.
✕ DO NOT use the truck for any purpose other than lifting, lowering, and transporting loads.
✕ DO NOT allow trucks to freewheel in transit. Always propel and control the truck by using the handle.
✕ DO NOT use the truck on sloping surfaces.
✕ DO NOT operate the truck when you are tired or under the influence of alcohol, drugs, or intoxicating medication.
✕ DO NOT allow children to operate the truck.
✕ DO NOT adjust or tamper with the hydraulic safety valve.
✕ DO NOT place any part of your body within or under the truck platform when raised.
✓ When not in use, fully lower the platform and store it in a safe, dry, childproof area.
INTRODUCTION
Heavy-duty construction. High lift version with 1500mm maximum platform
height. Fitted with four composite wheels, two fixed and two locking castors
for easy rolling over rough workshop floors. One-piece hydraulic unit
controlled by a large rear-mounted foot pedal. Designed to assist with
removing and installing batteries in electric vehicles. Can also be used for
assisting with many other day-to-day workshop tasks such as
removing/installing engines, transmissions, fuel tanks, and subframes, etc.
Safety release mechanism positioned on the handlebar for smooth controlled
descent. May also be used as a mobile service bench. This item is heavy. Extra
assistance must be provided at the
delivery point to help its safe delivery.
SPECIFICATION
MODEL NO.: …………………..EVBT700
Capacity: ………………………………………. 700kg
Maximum Platform Height: ………….. 1500mm
Minimum Platform Height: ……………. 445mm
Platform Length: ……………………………1220mm
Platform Width: …………………………. 610mm
Wheel Size: ……………………………….. Ø125mm
ASSEMBLY
NOTE:
The trolley comes fully assembled except for the handle assembly and foot
pedal. Refer to Parts List.
4.1. HANDLE
4.1.1. Fit the handle to the frame using the supplied screws and washers.
4.2. FOOT-PEDAL
4.2.1. Insert the foot pedal onto the drive shaft and fix in position using
the supplied fixings.
OPERATION
- WARNING! Ensure you read, understand and follow the safety instructions. Ensure all Health and Safety, local authority, and general workshop practice regulations and recommendations are strictly adhered to when lifting or moving heavy loads. The lifting or movement of heavy loads may be dangerous if not undertaken correctly.
5.1. RAISING THE PLATFORM
NOTE: Ensure that any obstructions are removed.
5.1.1. When in position for lifting the platform, ensure that the castor
wheels are locked in position.
5.1.2. Pump the foot pedal to raise the platform to the required height. If
fully extended, the safety bars can be lowered into position to prevent the
platform from dropping.
5.2. LOWERING THE PLATFORM
- WARNING! Ensure the load will not foul on anything and is clear of your hands and the handle when lowering.
5.2.1. If used, disconnect the safety bars by raising the table slightly and
turning the bars back to the resting position.
5.2.2. Squeeze the trigger to lower the platform.
5.2.3. Unlock the castor wheels and transport the load to the required
destination.
NOTE: With or without a load, always transport the truck with the
platform in its lowest position. When not in use, store the truck with the
platform in the lowest position.
MAINTENANCE
✓ When the truck is not in use, the platform must be in the lowest position to
minimize ram and piston corrosion.
✓ Keep the truck clean and wipe off any oil or grease. Lubricate all moving
parts with acid-free oil.
✕ DO NOT use truck if believed to have been subjected to an abnormal load or
shock load. Inspect and if necessary take appropriate action.
✓ Periodically check the pump piston and piston rod for signs of corrosion.
Clean exposed areas with a clean oiled cloth.
IMPORTANT: Only fully qualified personnel should attempt maintenance or repair
of the truck and its hydraulic system.
✓ The oil cylinder is a sealed unit and must not be accessed. For service
contact your authorized dealer.
- WARNING! Only a good quality hydraulic oil, such as Sealey hydraulic jack oil must be used, DO NOT use brake fluid.
IMPORTANT: NO RESPONSIBILITY IS ACCEPTED FOR INCORRECT USE OF THE TRUCK.
✓ Owing to their size and weight, hydraulic products should ideally be repaired by local service agents. We have service/repair agents in
✓most parts of the UK. Before returning your product please call our technical helpline on 01284 757505 for advice and troubleshooting guidance.
✓ Regularly grease the hinge points (fig.1).
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories, and packaging should be sorted, taken to a recycling center, and
disposed of in a manner that is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.
Note: It is our policy to continually improve products and as such we
reserve the right to alter data, specifications, and component parts without
prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is
required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk.
IP32 7AR
| 01284 757500
---|---
| 01284 703534
| sales@sealey.co.uk
| www.sealey.co.uk
© Jack Sealey Limited
Original Language Version
EVBT700 Issue 1 28/10/21
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>