SCR AMUT05 Monitoring Ear Tag User Manual
- May 15, 2024
- SCR
Table of Contents
SCR AMUT05 Monitoring Ear Tag
Specifications
- Commercial names: Monitoring Ear Tag (Previous name eSense Flex V2 TAG)
- Manufacturer: SCR Engineers Ltd.
- Model: AMUT05
- Frequency: 2.4GHz
- Power Source: Internal 3VDC non-rechargeable battery
- Regulatory Compliance: FCC Part 15, Industry Canada license-exempt RSS
Product Usage Instructions
Facility
- Identify the animal and choose an appropriate location for the ear tag.
- Attach the Monitoring Ear Tag securely to the animal’s ear following the provided guidelines.
Data Transmission
- Ensure the base unit (BU500/E or SHC) is within range of the Monitoring Ear Tag.
- The tag will transmit data every 4 milliseconds per hour to the base unit via a 2.4 GHz link.
Maintenance
- Check the battery status regularly and replace it when needed.
- Inspect the ear tag for any damage or wear and tear, replacing it if necessary.
FAQ
- Q: What should I do if the Monitoring Ear Tag is not transmitting data?
- A: Check the battery status and ensure that the base unit is functioning correctly and within range of the tag.
- Q: How long does the battery last in the Monitoring Ear Tag?
- A: The internal 3VDC non-rechargeable battery typically lasts for a certain period based on usage.
©Copyright SCR Engineers LTD. 2016
This Monitoring Ear Tag Specification is copyrighted. All rights are reserved
and no part of this publication may be reproduced or transmitted in any form
or by any means without prior written consent.
Disclaimer
The information in this manual was accurate and reliable at the time of its
release. However, we reserve the right to change the specifications of the
product described in this manual without notice at any time.
Registered Trademarks
All other proprietary names mentioned in this manual are the trademarks of
their respective owners.
Revision 0.9
- Issued by: Zeev Kapelnik
- Approved by:
Version History
| 1 | Initial version |
|---|---|
| 2 | Brand name update – SCR |
| 3 | Add IC ID and certification warnings for NA and CN |
| 4 | Add Regulatory ID by e-labeling |
| 5 | Product name update to eSense Flex V2 |
| 6 | Remove BD |
| 7 | Update modulation type and regulatory ID marking |
| 8 | Update regions notifications |
| 9 | Update product name to Monitoring Ear Tag |
Monitoring Ear Tag FCC ID: AMUT05
- Manufacturer: SCR Engineers Ltd.
- This device complies with Part 15 of the FCC Rules.
- Operation is subject to the following two conditions:
- This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.
FCC STATEMENT
The FCC Wants You to know
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Warning
Modifications to this equipment not expressly approved by the party
responsible for compliance (SCR Engineers Ltd.) could void the user’s
authority to operate the equipment under FCC Rules.
ISED Warning
SCR engineers Ltd n’approuve aucune modification apportée à l’appareil par
l’utilisateur, quelle qu’en soit la nature. Tout changement ou modification
peuvent annuler le droit d’utilisation de l’appareil par l’utilisateur.
RF Exposure Warnings
RF Exposure – This device has been tested for compliance with FCC RF exposure
limits in a portable configuration. This device must not be used with any
other antenna or transmitter that has not been approved to operate in
conjunction with this device.
Industry Canada Notice:
IC: 26436-AMUT05
This Class B digital apparatus complies with Canadian ICES-003. – Cet appareil
numerique de la classe B est conforme a la norme NMB-003 du Canada.
This device complies with Industry Canada ICES-003 licence-exempt RSS
standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Interference Statement
This device complies with Part 15 of the FCC Rules and Industry Canada
licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Wireless notice
This device complies with FCC/ISED radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines and RSS‐102 of the ISED radio frequency (RF) Exposure rules. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Warning
This is a class-A product. In a domestic environment, this product may cause
radio interference in which case the user may be required to take adequate
measures.
Global system specifications
- All units are for outdoor use, required Radio regulations according to the target market & Low voltage 24VDC regulation – tag powered by an internal, 3VDC non-rechargeable battery.
System components
- TAG – Activity-based tag with 2.4GHz transceiver.
- BU-500 – LD Base unit, with an RS-485 network interface and 2.4GHz transceiver.
- BU-500E – LD Base unit, with 10BASE-T/100BASE-TX Ethernet network interface and 2.4GHz transceiver.
- SHC – SenseHub Controller – same communication protocol with TAGs as BUxxx
Monitoring Ear Tag Specifications
General description
- Brand Name:- Allflex
- Product Name: – Monitoring Ear Tag
- Model Number: AMUT05
Dairy/Beef cow ear tag
Includes LED indicator (operation depends on system SW)
Basic operational functionality:
- Identification of animals using a 2.4GHz transceiver and/or HFC reader unit.
- Measure various animal parameters, and processes and transmit them via a 2.4 GHz link to the base unit (BU500/E or SHC).
- The tag transmits a message at 4ms/Hour.
- Outdoor installation, sealed unit, powered from internal 3V battery.
4GHz Transceiver Parameters
- RF Transceiver: Part of SOC SiLabs EFR32FG14P232F256GM32-B
- RF Frequency: 2.405-2.48GHz
- Modulation type: O QPSK DS
- RF Channels: 5MHz separation 16ch
- Occupied Bandwidth: 2.25MHz
- Baud Rate: 250Kbps
- Output power: 4dBm max
- Antenna type: PCB Omni-directional
- Antenna gain: Average -6.94dBi (Max gain: -1.69dBi)
- Average RF data: TX – 2 msg of 4ms every 20min; Rx – 4 msg/hour of 1ms
- Tag communication on a specific, predefined channel.
- A channel can be changed via the management system
NFC Parameters
Utilizing Passive internal HFC High-Frequency inlay (IC and Antenna) complying
with the following standards
- ISO/IEC 15693-2, -3
- ISO/IEC 18000-3 Compliant
- 13.56-MHz Operating Frequency
Mechanical dimensions
Environmental Condition s
- IP – required IP67.
- Operational temperature -33°C to 50°C.
Monitoring Ear Tag Installation instructions
It is important to correctly attach the tags to the cow’s ear in a secure
manner to avoid them from turning or falling off.
To securely attach the tag to the cow’s ear:
- Ensure that your tag assembly kit includes the following parts:
- AMUT05 TAG
- Pins – optional MO5 1195 or similar as will be decided in future
- Applicator – Universal tagger
A properly mounted tag should look like this picture
Product marking – Regulatory ID – e-Labeling
As the product is too small, regulatory IDs as required by e-labeling,
operation system as below chart, on user guide and package.
On the product itself, only safety marking and model name.
eLabeling on the web management application
Documents / Resources
| SCR
AMUT05 Monitoring Ear
Tag
[pdf] User Manual
AMUT05 Monitoring Ear Tag, AMUT05, Monitoring Ear Tag, Ear Tag
---|---