DRIVEN WH1144 R/C Scissor Lift Truck User Manual

DRIVEN WH1144 R/C Scissor Lift Truck

Product Information

Specifications:

• Brand : Battat
• Model : WH1144/WH1144Z
• Batteries Required for Truck : 6 x AA (1.5V) (included)
• Batteries Required for Remote Control : 2 x AA (1.5V) (not included)

Product Usage Instructions

Starting to Play

1. Make sure the ON/OFF switch on the truck and remote are in the ON position (Fig. 1 & Fig. 2).
2. Press on the steering wheel as indicated in Fig. 4, then press any button on the remote as indicated in Fig. 3.
3. The truck will go into sleep mode after 30 minutes of inactivity to save power. Wake it up by pressing on the steering wheel (Fig. 4).
4. If the truck disconnects from the controller, switch both the truck and the controller OFF, then back ON (Fig. 1 & Fig. 2). Continue with step 2.

Replacing Truck Batteries

To replace the truck batteries:

• Use 6 x AA (1.5V) batteries included with the product.
• Refer to Fig. 6 for battery replacement instructions.

Steering Alignment Adjustment

If the truck drifts to the right:

• Turn the lever towards the left (L).

Battery Advice

Follow these guidelines for battery usage:

• Use 6 x AA (1.5V) batteries for the truck (included).
• Use 2 x AA (1.5V) batteries for the remote control (not included).
• Do not recharge non-rechargeable batteries.
• Remove rechargeable batteries before charging.
• Charge rechargeable batteries only under adult supervision.
• Do not mix different types of batteries or new and used batteries.
• Insert batteries with the correct polarity.
• Remove exhausted batteries from the toy.

FAQ

• Q: What should I do if the truck disconnects from the controller?
  • A : Switch both the truck and the controller OFF, then switch them back ON and continue with step 2 of the starting instructions.

TO START PLAYING

1. Make sure the ON/OFF switch on the truck and remote are on the ON position (Fig. 1 & Fig. 2).
2. Press on the steering wheel, as indicated in Fig. 4, then press any button on the remote, as indicated in Fig 3.
3. The truck will automatically go into sleep mode after 30 minutes of inactivity to save power. Wake up by pressing on the steering wheel, as indicated in Fig. 4.
4. In case the truck disconnects from the controller, switch the truck and the controller OFF, then switch them back ON again (Fig. 1 & Fig. 2). Continue with step 2.

Troubleshooting

• Frequency bands : 2405MHz-2475MHz
• Maximum radio-frequency power : 5dbm

Use alkaline batteries for longer playtime

WARNING!: SMALL PARTS – CHOKING HAZARD. Not suitable for children under 3 years

WARNING:
CHOKING HAZARD-Small parts.
Not for children under 3 years.

STEERING ALIGNMENT ADJUSTMENT

If the vehicle does not drive in a straight line, adjust the alignment using the alignment lever. If the vehicle drifts to the left, turn the lever towards the “R”. If the vehicle drifts to the riaht. turn the lever towards the “L”

Alignment lever

Please remove all packaging materials before giving to children.

 User Guide

1. Do not use near seawater or in dirty and dusty environments.
2. Do not use in the rain or immediately after rainfall.
3. If the vehicle gets wet, open the battery compartment immediately, remove the batteries, and turn the vehicle upside down to dry.
4. Always clean and dry the vehicle and remote after using outdoors to avoid damage.
5. Do not overload the scissor lift basket.
6. The remote’s control distance may be reduced when used indoors.
7. The vehicle’s remote control may not work after long storage. Follow the steps on tore start neway a realine he has risen i remote cle Fol tea Debt series the St Ba felt steps and on the first page to start playing. C) if the the steps below to re-start : A) Always replace the batteries in the vehicle with 6 new AA alkaline batteries (Fig. 5). B) Follow the steps and 2) on the first page to start playing. C) If the vehicle does not work. put 2 new AÁ alkaline batteries in the remote (Fia, 6), D) Follow steps 1 and 2)on the first page to start playing.

BATTERY ADVICE Requires 6 x AA (1.5V) batteries for the truck (included). Requires 2 x AA (1.5V) batteries for the remote control (not included). Non- rechargeable batteries are not to be recharged. Rechargeable batteries are to be removed from the toy before being charged. Rechargeable batteries are only to be charged under adult supervision. Different types of batteries or new and used batteries are not to be mixed. Only batteries of the same or equivalent type as recommended are to be used. Batteries are to be inserted with the correct polarity. Exhausted batteries are to be removed from the toy. The supply terminals are not to be short-circuited. ATTENTION : When the module’s functions lose performance, follow instructions carefully to install new batteries.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) authority to operate the equipment.

NOTE : This equipment has been tested and with the instructions, may cause harmful interference to radio communications. encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation Cirweither ent from that to which the receiver is connected Consuthededer or an experienced radio/TV technician for help.

This device contains license-exempt transmitters)/receivers) that comply with Innovation Science and Economic Development Canadas licence-exempt RSS/s) Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference including interference that may cause undesired operation of the devices

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>