DRIVEN DRWC7CM 7 Inch HD Digital Color Wireless Monitor with Wireless Camera System Owner’s Manual
- October 30, 2023
- DRIVEN
Table of Contents
DRIVEN DRWC7CM 7 Inch HD Digital Color Wireless Monitor with Wireless
Camera System
Product Information
The product is a monitor and camera system designed for use in vehicles. The monitor is equipped with a suction cup base for easy installation on the dashboard or window screen. It comes with a cigarette lighter plug that can be inserted into the vehicle’s cigarette lighter socket. The camera is also included and needs to be wired to the monitor for proper usage. The system can be paired for seamless operation.
Product Usage Instructions
- Familiarize yourself with the instructions before starting the installation.
- Monitor Installation:
- Find a suitable location on the dashboard or window screen for the monitor, ensuring it is easily viewable and does not disturb your vision of the road while driving.
- Clean the chosen location using alcohol wipes to ensure it is dust and grease-free.
- Mount the monitor base using the supplied suction cup.
- The monitor is equipped with a cigarette lighter plug that can be easily inserted into the vehicle’s cigarette lighter socket.
- Standard Operation:
- After successful installation and pairing (if required), turn the ignition key on, ensuring the RED power button on the monitor cigarette plug is switched on.
- View the camera image on the monitor. If no image is visible, check all wiring connections are securely fastened.
- If the image displays properly, follow the instructions below to adjust your screen settings.
- Camera Installation:
- Wire the camera to the monitor.
- Camera Wiring Connection:
- Follow the wiring instructions to connect the camera to the monitor.
- Monitor and Camera Pairing:
- Typically, both units will already be paired before shipping from the factory. If not, power on the monitor then hold the pair button for about 2 to 3 seconds to enter pairing mode.
- While in pairing mode, power on the camera.
Congratulations on purchasing the Driven ™ DRWC7CM wireless reverse camera system, This system uses the latest technology available to ensure that it is durable, reliable and can provide a clear image of the view behind your vehicle while reversing, This product uses the latest digital technology to ensure durability and simple DIY installation.
MAIN FEATURES
-
1080p HD Quality
-
All View Angle IPS TFT LCD Panel
-
2.4G Digital Wireless Transmit Solution
-
Wireless Transmit Range at About 300M
-
Camera With Microphone For Sound Wireless Transmit
-
Monitor Have Sound Mute Operation Button
-
Easy Operation & Installation on Vehicles
Please familiarize yourself with these instructions before starting your installation.
MONITOR INSTALLATION
- Find a suitable location on your dashboard or window screen for your monitor. Please ensure it is in a location where it is easily viewable and does not disturb your vision of the road while driving.
- Clean the location that you have decided to place the monitor to ensure that it is dust and grease free ( it is recommended to use alcohol wipes to do this)
- Mount the monitor base using the supplied suction cup.
The Monitor is equipped with a cigarette lighter plug that can be easily inserted into the cigarette lighter socket in the vehicle.
STANDARD OPERATION
After the monitor and camera have been successfully installed and paired
(if required), turn the ignition key on ensuring the RED power button on the
monitor cigarette plug is switched on, View the image from the camera on the
monitor. If no image is visible, check all wiring connections are securely
fastened. If the image displays properly, please follow the instructions below
to adjust your screen settings:
CAMERA INSTALLATION
Proper installation of the Camera is critical to the overall view you will be
able to see from your in-cab DRIVEN DRWC7CM wireless monitor. In most cases
the rear-view camera mount on an RVs is mounted just below the rear top
clearance lights. If your clearance lights are too low, this shouldn’t be a
problem, simply plan to for installation of the camera at the highest point of
the rear outer panel of your RV. Most modern-day RVs are prewired with a 12v
DC power supply cable that hidden behind a camera mount cover. If this is the
case, simply remove the 4 mounting screws off the pre-mounted base, connect
the simple 2 wire red and black cables to the new harness and replace the
complete mount and base with the DRIVEN DRWC7CM camera by screwing it down
securely with the previously removed screws. In the event that your RV or
trailer does not come prewired with a 12v DC power supply at the desired
location, you will have to carefully run a power supply cable to the location
on your RV were you wish to mount your camera system. Plan your wire route for
under the RV trailer. Be sure to avoid areas that could be affected by heat or
abrasion. Make sure to properly fuse the power supply cable at its origin.
Once the camera is powered up, follow the pairing instructions provided with
the DRIVEN DRWC7CM wireless monitor. Align the camera and test the angle of
the view. Make sure to adjust the angle several times to check your options.
Once you have chosen the specific angle for the camera you are good to go.
Camera Wiring Connection
CAMERA WIRING CONNECTION
MONITOR & CAMERA BUTTON FUNCTIONS
- PAIR BUTTON
- DISTANCE SCALE LINE ON/OFF OFF
- PICTURE REVERSE
- BRIGHTNESS +
- BRIGHTNESS –
- POWER
FOR MONITOR AND CAMERA PAIRING:
Typically, both units will already be paird before shipping from the factory.
If not, power on the monitor then hold the pair button for about 2 to 3
seconds to enter pairing mode. While in pairing mode, power on the camera.
LIMITED WARRANTY
Driven™ warrants any products purchased in the U.S.A. from an authorized
Driven ™ dealer. All Products are warranted to be free from defects in
material and workmanship under normal use and service for a period of one (1)
year. This warranty applies to the original purchase only. Driven™ will either
repair or replace (at its own discretion) any unit that has been found to be
defective and under warranty provided the defect occurs within the one (1)
year warranty period. This limited warranty does not exted to units that have
been subjected to misuse, abuse, neglect, or accident. In Drive n’s TM
judgment, products that show evidence of having been altered, modified or
serviced without Driven’s authorization, will be ineligible under this
warranty. To Obtain warranty service please contact your retailer or visit our
website at
www.drivenelectronics.com/contact
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>