Dansk Nest of Lamp Tables Instructions

June 4, 2024
Dansk

Nest of Lamp Tables
Instruction manual

Thank you for purchasing this product Please read the instructions carefully before use to ensure safe and satisfactory operation of this product

Dansk Nest of Lamp Tables

Pre-assembly preparation

Please ensure instructions are read in full before attempting to assemble this product.
Necessary Tools

Please check the package contents before attempting to assemble this product. A full checklist of components is given in this leaflet. If any components are missing, please contact the retailer from whom you bought this product.
This product takes approximately 25 MINUTES to assemble with 1 PERSON.
All assembly should be performed on a flat, stable, clean, and soft surface.
The fitting pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.
IMPORTANT: Retain these instructions for future reference.

Dansk Nest of Lamp Tables - Figure 1

Fitting and parts checklist

Item| Description| Qty.| | Item| Description| Qty.
---|---|---|---|---|---|---
1| Large table top| x 1| | 3| Small tabletop| x 1
2| Long leg| x 4| 4| Short leg| x 4

Step By Step Assembly Instructions

Step

  1. Place large tabletop (1) on a flat, stable, clean, and soft surface.
  2. Screw long legs (2) into the fittings that are concealed in the pre-drilled holes on the large tabletop (1) as shown. Continue to re-tighten until the legs are securely fastened. Repeat this exercise for small tabletop (3) and short legs (4).
  3. Stand the unit upright.
    Dansk Nest of Lamp Tables - Figure 2 assembly is complete

Care and Maintenance

Wood Furniture Wood displays different grain patterns depending on which way they are cut – for example, the ‘medullary ray’ which can appear on oak furniture is a mark of good quality timber – these are just characteristics of the natural beauty of the wood. Some furniture is also deliberately aged and rustic. Wood veneers also allow distinctive patterns to be created on some surfaces, such as table tops and drawer fronts by the way slivers are arranged. All timber and veneer surfaces will change color and mellow over time. New furniture will initially vary in shade from items that have been previously purchased.

How to care for your wood furniture
Dust with a clean, damp, lint-free cloth. Frequent dusting will remove abrasive build-up, which can damage the finish over time. Do not use a very wet cloth or allow any liquid to contact the veneers for a long period of time as this can permanently damage the surface. Wipe up spills immediately. Do not use any abrasive cleaner or harsh detergent as this can damage the surface of the furniture. Spray polishes are best avoided as they contain silicones which may spoil the furniture’s surface when building up over time. Make sure all surfaces are protected from heat and liquids by mats and coasters. Ensure that a mat or pad is placed under paper when you are writing on the furniture surface. Do not place rubber, cork, vinyl or plastic materials on the wood finish as chemicals within may react with the finish if left in contact for an extended period of time. Our furniture will endure most temperatures in the home but it is best to avoid placing furniture next to heat sources such as radiators or fires. Be particularly careful with solid wood as the lack of humidity caused by home heating can cause damage such as warping, cracking or splitting. Excessive exposure to sunlight can cause fading of your furniture. Avoid exposing your furniture to any liquids. All liquids should be wiped up immediately with a soft, slightly damp cloth in the direction of the wood grain. If sticky liquid residues do occur, they may be removed with a dilute solution of warm soapy water followed by a clean, damp sponge. The area should then be wiped immediately in the direction of the wood grain with a clean, soft white cloth until completely dry. Nail polish remover, hairspray, perfume, potpourri & any other products that contain solvents can damage wood upholstery finishes.

Safety Instructions:
Never drag furniture when moving it. Always lift it. Periodically check all fixings to ensure none have come loose. Re-tighten when necessary. Please take care when handling or moving the furniture as careless handling may cause damage or injury. Furniture can be dangerous if incorrectly assembled. Assembly should be carried out by a competent person. No liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals